| |
G3ZJO > HELP 12.01.06 20:11l 29 Lines 907 Bytes #999 (0) @ WW
BID : 790228G3ZJO
Read: GUEST
Subj: Re: RIGblaster NOMIC
Path: DB0FHN<DB0FOR<DB0SIF<DB0EA<DB0RES<DK0WUE<I0TVL<F6CDD<ON4HU<GB7YFS<
GB7BEN
Sent: 060112/1352Z @:GB7BEN.#43.GBR.EU #:36177 [Bletchley] $:790228G3ZJO
From: G3ZJO@GB7BEN.#43.GBR.EU
To : HELP@WW
G0FTD wrote:-
> I nearly said the same - but decided to hold back (for a change) ;-)
Funny thing I just put this on the local BBS.
Ok I have come to accept the fact that some Hams will pay 200Uk pounds
for a thing called a Rigblaster and accept the inconvenience of needing to
plug that into the microphone socket of their rig.
Rather than pick up a soldering iron, a 13 or 8 pin data plug, 3 bits of
wire, a transitor, 2 transformers, 2 diodes, 2 resistors and a D plug. 10
Uk pounds worth of stuff at the most and gain convenience.
I accept but can for the life of me understand it.
It is the same with the TNC.
(message sent on ALL mode interface made for a couple of quid)
WARNING interface construction may involve the use of a soldering iron.
73 - Eddie, G3ZJO @ GB7BEN
Message timed: 13:43 on 2006-Jan-12
Message sent using WinPack-AGW V6.80
Read previous mail | Read next mail
| |
