| |
PA2AGA > HDDIG 20.08.00 21:33l 156 Lines 4959 Bytes #999 (0) @ EU
BID : HD_2000_226
Read: GUEST
Subj: HamDigitalDigest 2000/226
Path: DB0AAB<DB0SL<DB0RGB<OE5XBL<OE3XSR<OK0PPR<OK0PJI<OM0PBB<SR9ZAA<SR4BBX<
SR7BBS<PI8JOP<PI8ZAA<PI8WFL<PI8HGL
Sent: 000820/1924Z @:PI8HGL.#ZH1.NLD.EU #:6013 [Den Haag] FBB $:HD_2000_226
From: PA2AGA@PI8HGL.#ZH1.NLD.EU
To : HDDIG@EU
Date: Sun, 20 Aug 00 20:36:14 MET
Message-Id: <hd_2000_226>
From: pa2aga@pe1mvx.ampr.org
To: hd_broadcast@pa2aga.ampr.org
X-BBS-Msg-Type: B
Ham-Digital Digest Sun, 20 Aug 2000 Volume 2000 : Issue 226
Today's Topics:
Amateur Radio Future? (2 msgs)
Dx-cluster
DXPSK version 1.3a is available free
help with BTL
VB code for PSK31 utilising Moe's DLL
What software to choose
Send Replies or notes for publication to: <Ham-Digital@UCSD.Edu>
Send subscription requests to: <Ham-Digital-REQUEST@UCSD.Edu>
Problems you can't solve otherwise to brian@ucsd.edu.
Archives of past issues of the Ham-Digital Digest are available
(by FTP only) from ftp.UCSD.Edu in directory "mailarchives/ham-digital".
We trust that readers are intelligent enough to realize that all text
herein consists of personal comments and does not represent the official
policies or positions of any party. Your mileage may vary. So there.
Loop-Detect: Ham-Digital:2000/226
----------------------------------------------------------------------
Date: Sun, 20 Aug 2000 09:12:07 GMT
From: "William Wetzel" <n6rky@digitalschoolnet.com>
Subject: Amateur Radio Future?
Hello everyone,
I am preparing to do a survey on the future of amateur radio. Any ideas on
questions that should be asked will be welcome.
Best Wishes,
--
William A. Wetzel
http://www.qsl.net/n6rky
http://www.digitalschoolnet.com
http://home.earthlink.net/~n6rky
mailto:n6rky@earthlink.net
------------------------------
Date: Sun, 20 Aug 2000 05:34:53 -0500
From: "K5OKC" <ssampson@usa-site.net>
Subject: Amateur Radio Future?
Q: Did you know there was Ham frequency allocations above 450 MHz?
Q: What amateur frequency allocations do you see as unnecessary, or wasted?
"William Wetzel" wrote
> Hello everyone,
>
> I am preparing to do a survey on the future of amateur radio. Any ideas on
> questions that should be asked will be welcome.
------------------------------
Date: Sat, 19 Aug 2000 18:58:45 GMT
From: Peter <pb0aiu11@pi4cc.nl>
Subject: Dx-cluster
Hello,
Just to inform you that we (PI4CC) have added a DX-cluster to the
internet.
You can telnet in at : telnet://195.38.205.43 If you have troubles take
a look
at: http://www.pi4cc.nl/dxcluster Here is a description how to enter.
73 Peter
------------------------------
Date: 19 Aug 2000 21:00:00 GMT
From: chramade@aol.com (ChRAMADE)
Subject: DXPSK version 1.3a is available free
http://members.aol.com/chramade/dxpsk.htm
New psk31 program available free
------------------------------
Date: 13 Aug 2000 12:34:29 +1200
From: "Jim" <zl2bmh@zfree.co.nz>
Subject: help with BTL
Thank you for reading this message. I have downloaded the BTL software but
cannot get it running.
Could some very nice gentleman contact me at...zl2bmh@zfree.co.nz...
and i will let him know what help I need and hopefully we can run through
it together.
Many thanks to you all
Jim (New Zealand)
http://www.zfree.co.nz
------------------------------
Date: Sat, 12 Aug 2000 23:47:38 GMT
From: "Colin Campbell" <mm5agm@cableinet.co.uk>
Subject: VB code for PSK31 utilising Moe's DLL
Hi All,
I am a bit disappointed to see that no one has released Visual Basic code
that shows how to use Moe Wheatley's (AE4JY) DLL. VB isn't the easiest
language to use with the DLL and it occurred to me that the lack of code
could be because programmers couldn't get past the initial hurdles of
sub-classing, to get to the messages sent from the DLL, and passing Arrays
to/from the DLL. I have quickly written some code that decodes the PSK
signal and shows how some of the Moe's functions work. I am working on the
transmit side but have to admit that it doesn't work yet. My reason for
writing this is to show others how to get past these initial hurdles. If you
are a VB programmer and would like to write a PSK31 program using the DLL I
will send you the code I have. ( if there are too many requests I'll put it
on my webpage ) Note that this code is no use to you unless
you have Visual Basic 6. I am not releasing a compiled usable program for
PSK31 because I think there are more than enough simple programs already. If
you
want the code e-mail me and confirm that you have Visual Basic 6 so that you
can compile it. If the above means nothing to you then PLEASE do not request
the code!
Colin MM5AGM
------------------------------
Date: 19 Aug 2000 20:58:26 GMT
From: chramade@aol.com (ChRAMADE)
Subject: What software to choose
Take a look at http://members.aol.com/chramade/dxpsk.htm
for DXPSK (free psk31 program)
------------------------------
End of Ham-Digital Digest V2000 #226
******************************
You can send in your contribution to this digest by
sending an e-mail to: hd-group@pa2aga.ampr.org
or (via BBS-net) to: hdaga@pi8vnw.#zh2.nld.eu
Read previous mail | Read next mail
| |
