| |
PA2AGA > HDDIG 11.08.00 01:08l 92 Lines 2713 Bytes #999 (0) @ EU
BID : HD_2000_215
Read: GUEST
Subj: HamDigitalDigest 2000/215
Path: DB0AAB<DB0KFB<DB0CZ<F6KFG<DB0PSC<DB0ACH<PI8JOP<PI8ZAA<PI8HGL
Sent: 000810/2148Z @:PI8HGL.#ZH1.NLD.EU #:3949 [Den Haag] FBB $:HD_2000_215
From: PA2AGA@PI8HGL.#ZH1.NLD.EU
To : HDDIG@EU
Date: Thu, 10 Aug 00 22:32:03 MET
Message-Id: <hd_2000_215>
From: pa2aga@pe1mvx.ampr.org
To: hd_broadcast@pa2aga.ampr.org
X-BBS-Msg-Type: B
Ham-Digital Digest Wed, 9 Aug 2000 Volume 2000 : Issue 215
Today's Topics:
56Kb Packet Radio Modem
Trouble with KAM Allmode!
Send Replies or notes for publication to: <Ham-Digital@UCSD.Edu>
Send subscription requests to: <Ham-Digital-REQUEST@UCSD.Edu>
Problems you can't solve otherwise to brian@ucsd.edu.
Archives of past issues of the Ham-Digital Digest are available
(by FTP only) from ftp.UCSD.Edu in directory "mailarchives/ham-digital".
We trust that readers are intelligent enough to realize that all text
herein consists of personal comments and does not represent the official
policies or positions of any party. Your mileage may vary. So there.
Loop-Detect: Ham-Digital:2000/215
----------------------------------------------------------------------
Date: Mon, 07 Aug 2000 00:49:56 +0000
From: Jim Jerzycke <kq6ea@pacbell.net>
Subject: 56Kb Packet Radio Modem
A constelation of Microsats is not workable.
Read the article and rebuttal about an "Artifical Ionosphere" that was
in AMSAT Journal.
Regards, Jim
------------------------------
Date: Tue, 08 Aug 2000 14:41:56 +0000
From: Holger Korioth <hkorioth@cityweb.de>
Subject: Trouble with KAM Allmode!
Hi Folks!
I have here some trouble with an KAM Allmode Controller.
The KAM with itīs original Firmware 2.85 works fine, an Update
with v6.1 (for the KAM without Enhancement Board) produces a
RAM error in Test mode.
After an Hard-Reset (Jumper K6) this Data appers on my Terminal
EEPROM INIT OK <= changed to 24c16
CHECKSUM OK <= the Eprom, i guess
RAM ERROR <= ?
32K RAM <= RAM size (correct!)
After changing the RAM, the same failure comes up, the Adress- and
Data connections on the Printed Board seems also ok.
Changing to v2.85 let the KAM work fine, but i need the
PACTOR Mode from the v6.1.
Had anyone the same error on his KAM and a solution to solve
the Problem?
73s from Hagen (JO31RI)
Holger, DG 6 DBF
Holger Korioth, DG 6 DBF
QTH: D-58093 Hagen (JO31SI) SP v9.75.00
9k6 - DB0AFS
MyBBS: dg6dbf @ db0sgl.#nrw.deu.eu
email: dg6dbf @ amsat.org
Mail gesendet am: 08.08.2000 um: 16:30
------------------------------
End of Ham-Digital Digest V2000 #215
******************************
You can send in your contribution to this digest by
sending an e-mail to: hd-group@pa2aga.ampr.org
or (via BBS-net) to: hdaga@pi8vnw.#zh2.nld.eu
Read previous mail | Read next mail
| |
