| |
PA2AGA > HDDIG 01.06.00 15:17l 190 Lines 6907 Bytes #-9461 (0) @ EU
BID : HD_2000_152J
Read: GUEST
Subj: HamDigitalDigest 2000/152J
Path: DB0AAB<DB0SL<DB0RGB<DB0MRW<DB0SON<DB0ERF<DB0SHG<DB0OBK<DB0SM<PI8DAZ<
PI8GCB<PI8HGL
Sent: 000601/0042Z @:PI8HGL.#ZH1.NLD.EU #:46290 [Den Haag] FBB $:HD_2000_152J
From: PA2AGA@PI8HGL.#ZH1.NLD.EU
To : HDDIG@EU
Date: Thu, 01 Jun 00 00:21:31 MET
Message-Id: <hd_2000_152J>
From: pa2aga@pe1mvx.ampr.org
To: hd_broadcast@pa2aga.ampr.org
X-BBS-Msg-Type: B
could operate as a node of the type familiar to everyone and route IP at
the same time, these voices faded and the separate networks fortunately
never appeared.
(although that now probably means the IP network will get lost in the
battle over a better replacement for NET/ROM. most candidates do not route
IP...)
However, this is not an issue related to the original topic of this
discussion. It is more like this: F6FBB BBS supports both keyboard
connections and an interface for more advanced clients, that retrieve their
messages in compressed mode and using a protocol that more resembles the
forwarding protocol used between FBB BBSes.
What if the author suddenly decides that the keyboard mode is no longer
required and that only users with programs that implement the special
protocol are allowed to connect to the BBS?
Would you be happy? Probably only when you happen to use one of these
special programs, not when a program is not available for your machine
and/or you have to switch to another program.
Rob
--
+----------------------------------+--------------------------------------+
| Rob Janssen pe1chl@amsat.org | WWW: http://www.knoware.nl/users/rob |
| AMPRnet: rob@pe1chl.ampr.org | AX.25 BBS: PE1CHL@PI8WNO.#UTR.NLD.EU |
+----------------------------------+--------------------------------------+
------------------------------
Date: Tue, 30 May 2000 12:14:30 GMT
From: Den <dennis.spiess@reckitt.com>
Subject: Using Digipan 1.1 to Key Kenwood Radio
In article <8gu7he$eug$1@bob.news.rcn.net>,
"Greg Carey" <gandicarey@erolc.com> wrote:
> De Greg, KN4EL
>
> I've been enjoying the fascinating world of PSK31 for all of 2
weeks. I use
> RCP (Kenwood's Radio Control Program) to control a Kenwood 570S. This
> program works flawlessly, but after setting Digipan up to use the
same com
> port that works for RCP (I don't use the two programs concurrently),
> Digipan still does not switch the radio over to transmit. My guess
is that
> Digipan does not use scripting (e.g., reg4=0;if(tx) rx; else tx;) for
> transmitting?
>
> Currently, I'm using audio from PC speakers and VOX on radio to
transmit
> PSK31. High pitched worbles used to sound nice, but the novelty has
worn
> off with self, XYL and harmonics. :-). Using the ACC plug at the
back of
> radio for audio (I/O) and getting Digipan to switch TXing would be
bliss!
>
> Looking forward to hear from anyone who has been able to use Digipan
to key
> similar Kenwood radios, especially via serial port, PC side to DB9
> connector, radio side.
>
> Tnx, 73
> Greg, Silver Spring MD
>
>
Radio TS 440 S AT
I use the PSK serial PTT with no problem and control the rig (it
communicates with my logging program)using seperate serial ports!
Sounds simple enough. Serial ports are very cheap and available for any
bus. Don't know why you would want to use the same port!!!???
Mu audio comes from the speaker jack, which mutes the internal speaker,
into an audio distribution system. I can dump the audio into the
computer and adjust the external speaker volume independently. Not
really rocket science. Just takes a little planning. Using a simple
audio system allows you to adjust all your audio needs independently,
headphones, tape recorder, DSP etc. Mine isn't much more than parallel
variable pots with phono-jacks. A few swithes were added to "insert"
the DSP where I want it. QST has published a few similar circuits. You
can add 'op' amps if you want to get fancy.
73
Den Spiess W2DEN -.-
Sent via Deja.com http://www.deja.com/
Before you buy.
------------------------------
Date: Tue, 30 May 2000 12:28:07 GMT
From: Den <dennis.spiess@reckitt.com>
Subject: Where's the love for WinPSK?
In article <8gnvdu$p82$1@slb7.atl.mindspring.net>,
"Unclaimed Mysteries" <k4doh@mindspring.com> wrote:
> Apparently a shadowy cabal* has ordained the flashy Digipan as the
software
> of choice for people experimenting and using psk31. Don't wanna start
a
> fight, just wanna express my appreciation for AE4JY's well-executed
program.
> And the publicly available source code has already resulted in one
major
> enhancement by KA1DT with the "SE" version.
>
> When you get down to it, it's an embarrassment of software riches out
there
> considering the newness of the mode. Thanks to all who have worked on
this.
>
> Corry
>
> --
> It came from C. L. Smith's Unclaimed Mysteries.
> http://www.unclaimedmysteries.net/
> *There is no cabal.
>
>
Here here!!!
I've used both WinPSKs and find them great packages. Now using TrueRTTY
as it handles RTTY and PSK.
Don't know why anyone would want 'wider' frequency displays. I think
they should be narrower with adjustable 'digital' filters. With the
bands getting more crowded 'seeing' ten signals and putting up with the
LOUD ones in a band-pass is a hinderance.
73
Den Spiess W2DEN -.-
Sent via Deja.com http://www.deja.com/
Before you buy.
------------------------------
Date: Tue, 30 May 2000 12:12:34 -0500
From: "Unclaimed Mysteries" <k4doh@mindspring.com>
Subject: Where's the love for WinPSK?
Den <dennis.spiess@reckitt.com> wrote in message
news:8h0c48$4nn$1@nnrp1.deja.com...
> Here here!!!
> I've used both WinPSKs and find them great packages. Now using TrueRTTY
> as it handles RTTY and PSK.
> Don't know why anyone would want 'wider' frequency displays. I think
> they should be narrower with adjustable 'digital' filters. With the
> bands getting more crowded 'seeing' ten signals and putting up with the
> LOUD ones in a band-pass is a hinderance.
> 73
There! There! ($1 to Firesign Theatre)
Alas, those of us without righteous digital filtering before the receiver
AGC will still have to tune around to dodge the strong signals. Murphy says
they will always be less than 100Hz from the VK station that's finally got a
good path to me at a reasonable hour in Alabama USA. One thing that works is
to reduce the RF gain to the point where your signal is just visible and
stronger ones don't hit the AGC too hard. If possible, switch off the AGC
(duh).
Digipan is nice. I used Digipan at a club program a couple of weeks ago. PC
to PC, from speakers to mic input. The wide screen (and switching to REALLY
BIG FONTS) helped the demonstration a lot.
Can't wait to put my Linux box together and see the Gnome and KDE
implementations of psk31 software.
--
It came from C. L. Smith's Unclaimed Mysteries.
http://www.unclaimedmysteries.net/
Public school all the way, bay-bee. So much for "socialization."
------------------------------
End of Ham-Digital Digest V2000 #152
******************************
You can send in your contribution to this digest by
sending an e-mail to: hd-group@pa2aga.ampr.org
or (via BBS-net) to: hdaga@pi8vnw.#zh2.nld.eu
Read previous mail | Read next mail
| |
