| |
PA2AGA > HDDIG 09.01.00 14:07l 238 Lines 6575 Bytes #-9622 (0) @ EU
BID : HD_2000_4B
Read: DL6KCF GUEST
Subj: HamDigitalDigest 2000/4B
Path: DB0AAB<DB0KFB<DB0CZ<F6KFG<DB0PSC<DB0ACH<DB0OVN<DB0ME<ON6AR<PI8HWB<
PI8VAD<PI8WNO<PI8HGL<PE1NMB<EA7URC<PE0MAR<PI8VNW
Sent: 000109/0830Z @:PI8VNW.#ZH2.NLD.EU #:43145 [HvHolland] FBB7.00g24 $:HD_200
From: PA2AGA@PI8VNW.#ZH2.NLD.EU
To : HDDIG@EU
Received: from pa2aga by pi1hvh with SMTP
id AA28233 ; Sun, 09 Jan 00 06:41:17 UTC
Received: from pa2aga by pa2aga (NET/Mac 2.3.70/7.5.3) with SMTP
id AA00017506 ; Sun, 09 Jan 2000 01:08:43 MET
Date: Sun, 09 Jan 00 01:04:24 MET
Message-Id: <hd_2000_4B>
From: pa2aga
To: hd_broadcast@pa2aga
Subject: HamDigitalDigest 2000/4B
X-BBS-Msg-Type: B
address like yours, Yoshi .....
>.
------------------------------
Date: Mon, 03 Jan 2000 13:19:31 +0100
From: Markus Lenggenhager <Markus.Lenggenhager@philips.com>
Subject: JVComm 1.0
http://www.jvcomm.de/
73, Markus HB9BRJ
Mark Bone wrote:
>
> I need the URL
>.
------------------------------
Date: Tue, 04 Jan 2000 03:16:50 GMT
From: rpyne@kinfolk.org (Richard)
Subject: KPC9612 and Kenwood TM-V7A
Does anyone have any suggestions or information about using the Kantronics
KPC9612 with a Kenwood TM-V7A?
I want to set this up so that 1200 baud runs on 2 meters and 9600 baud runs
on 70cm using this TNC/radio combination. Is this possible/practicle?
Thanks in advance for your help.
Richard Pyne, KB7RMU
rpyne@kinfolk.org
>.
------------------------------
Date: Mon, 3 Jan 2000 16:17:45 -0500
From: "Mark Erbaugh" <mark@nospam.microenh.com>
Subject: Pactor and FT-847 and PK-232?
Jerry Flanders <jflanders2@home.com> wrote in message
news:386fda03.203254085@news...
> I can't seem to connect with the pactor MBO stations with an FT-847 +
> PK232. Is there some trick to this combo? I have only used FSK radios
> before, and this is an AFSK setup
>
> I can set up his freq properly. After calling an MBO and timing out, I
> can hear the MBO station trying to respond to my call for awhile until
> he gives up on me. I can copy other stations in pactor ptlist, and the
> MBO obviously hears me and tries to connect, but my PK-232 is
> obviously not connecting with him.
>
> Any ideas?
>
> FYI - This is a new setup and this FT-847 has never been used on
> pactor before. The PK-232 has, though, using FSK with an ICOM 706.
>
> The objective is to set up an FT-847 with my PK-232 for pactor
> operation with the winlink stations so I can email while on the road
> in the camper.
>
> TIA
>
> Jerry W4UK
Could your receive tones be inverted? Try switching sidebands (from lower to
upper or vice versa)
Mark
>.
------------------------------
Date: Mon, 03 Jan 2000 22:54:07 GMT
From: jflanders2@home.com (Jerry Flanders)
Subject: Pactor and FT-847 and PK-232? PROBLEM SOLVED!
Problem solved. Kim, WB4LZQ had run into this problem before and
recommended I reduce the value of the coupling/blocking cap
recommended by Yaesu. They recommended 10 uFd. Reducing this to 0.22
makes it work well. Apparently the larger value results in a large
time constant slowing the PTT action, and reducing it speeds things
up. Got similar advice from "Billy" on the FT-847 bulletin board.
Thanks for the help, guys.
Jerry Flanders W4UK
On Mon, 3 Jan 2000 16:17:45 -0500, "Mark Erbaugh"
<mark@nospam.microenh.com> wrote:
>
>Jerry Flanders <jflanders2@home.com> wrote in message
>news:386fda03.203254085@news...
>> I can't seem to connect with the pactor MBO stations with an FT-847 +
>> PK232. Is there some trick to this combo? I have only used FSK radios
>> before, and this is an AFSK setup
>>
>> I can set up his freq properly. After calling an MBO and timing out, I
>> can hear the MBO station trying to respond to my call for awhile until
>> he gives up on me. I can copy other stations in pactor ptlist, and the
>> MBO obviously hears me and tries to connect, but my PK-232 is
>> obviously not connecting with him.
>>
>> Any ideas?
>>
>> FYI - This is a new setup and this FT-847 has never been used on
>> pactor before. The PK-232 has, though, using FSK with an ICOM 706.
>>
>> The objective is to set up an FT-847 with my PK-232 for pactor
>> operation with the winlink stations so I can email while on the road
>> in the camper.
>>
>> TIA
>>
>> Jerry W4UK
>
>Could your receive tones be inverted? Try switching sidebands (from lower to
>upper or vice versa)
>
>Mark
>
>
>.
------------------------------
Date: Tue, 28 Dec 1999 09:40:13 -0800
From: "Bill Turner, W7TI" <wrt@eskimo.com>
Subject: Psk31 software
I contacted N1RCT about the error messages when accessing his web site.
His reply:
Hello Bill .. I have never heard of such a problem .... My
ISP goes down for a while particularly on weekends, maybe
that causes a problem? Hope you had a good Xmas .. 73 de
Dick
So, please try again. The address: http://www.megalink.net/~n1rct/
And click the Psk31 box. Works for me.
Bill, W7TI
>.
------------------------------
Date: Mon, 3 Jan 2000 22:42:24 -0500
From: "Rick Mintz" <Rmintz@Frontiernet.net>
Subject: Virus Warning & Removal
I was advised that an email that I sent earlier contained
the virus HAPPE.EXE. You may have been infected. The site
http://www.symantec.com/avcenter/venc/data/fix.happy99.worm.
html contains a program that will remove the virus from you
system.
Do not execute HAPPY.EXE. REMOVE IT.
(Thanks to Tim, KG2NO, for the removal link)
Sorry for any inconvenience. I have no idea how this
occurred.
--
Rick Mintz, W1TY
Rochester DX Association
Rmintz@Frontiernet.net or W1TY@arrl.net
>.
------------------------------
Date: Tue, 4 Jan 2000 07:15:31 GMT
From: nomail@rob.knoware.nl (Rob Janssen)
Subject: Virus Warning & Removal
Rick Mintz <Rmintz@Frontiernet.net> wrote:
>Sorry for any inconvenience. I have no idea how this
>occurred.
I can tell you: you received a mail from a friend, and it had
an attachment named "happy99.exe". You ran it and it displayed a
fireworks display. You thought "nice gesture", but from then on it
sent the same message to each friend you sent a mail and after each
newsposting you made.
Lesson: don't blindly click on attachments received with mail or news.
These trojans are distributed by the large hurds of people that think
"aha, an attachment. let's doubleclick on it to see what it is". They
have to be tought to be more wary and practice "safe computing".
Rob
--
+----------------------------------+--------------------------------------+
| Rob Janssen pe1chl@amsat.org | WWW: http://www.knoware.nl/users/rob |
| AMPRnet: rob@pe1chl.ampr.org | AX.25 BBS: PE1CHL@PI8WNO.#UTR.NLD.EU |
+----------------------------------+--------------------------------------+
>.
------------------------------
End of Ham-Digital Digest V2000 #4
******************************
Both my XYL and myself wish you a very
happy and prosperous New Year. Adam PA2AGA.
Read previous mail | Read next mail
| |
