| |
PA2AGA > HDDIG 05.12.99 23:17l 228 Lines 6840 Bytes #-9660 (0) @ EU
BID : HD_99_307C
Read: GUEST
Subj: HamDigitalDigest 99/307C
Path: DB0AAB<DB0FSG<DB0SL<DB0RGB<DB0MAK<DB0ERF<DB0SHG<DB0BRI<PI8DRS<PI8DAZ<
PI8GCB<PI8HGL<PE1NMB<EA7URC<PE0MAR<PI8VNW
Sent: 991205/1809Z @:PI8VNW.#ZH2.NLD.EU #:29564 [HvHolland] FBB7.00g $:HD_99_30
From: PA2AGA@PI8VNW.#ZH2.NLD.EU
To : HDDIG@EU
Received: from pa2aga by pi1hvh with SMTP
id AA25458 ; Sun, 05 Dec 99 16:59:34 UTC
Received: from pa2aga by pa2aga (NET/Mac 2.3.67/7.5.3) with SMTP
id AA00017064 ; Sat, 04 Dec 99 23:41:04 MET
Date: Sat, 04 Dec 99 23:35:42 MET
Message-Id: <hd_99_307C>
From: pa2aga
To: hd_broadcast@pa2aga
Subject: HamDigitalDigest 99/307C
X-BBS-Msg-Type: B
with 3
> > conductor
> > shielded wire.
> >
> > a. I have the Kam turned on.
> > b. Turn on the 570
> > c. Try to transmit packet, 570 keys up but no output.
> > d. Go to menu #33 (it is set to 1)
> > e. press up or down button and then back to 1
> > f. Try to transmit packet again. Now 570 transmits fine with full
> > output
> > and will keep on doing fine until I turn it off. When I turn it
> > back on I have to
> > go through the whole thing again. Menu #33 DOES NOT change, it
> > stays where
> > I put it.
> >
> > Any help would be greatly appreciated
> > 73 de Tony, KD4K
>.
------------------------------
Date: Mon, 29 Nov 1999 21:27:10 -0500
From: "Anthony Cash" <kd4k@ga.prestige.net>
Subject: Kenwood TS-570D and Kam
Gary,
Did you have the audio problem also or just the keying problem??
Thanks for the info.
73 de Tony, KD4K
"Gary Danaher" <gdanaher@flash.net> wrote in message
news:3841CB2C.F1E609D7@flash.net...
> Check the voltage going to the Kam. I have a Kam plus and had the same
> trouble until I discovered that the voltage was on the high side.
> Getting the voltage to the low end of the scale, the problem went away.
>
> Anthony Cash wrote:
> >
> > I have 2 problems with my TS-570D (not G model) and the Kantronics Kam.
> >
> > 1. If I turn the Kam on and the 570 is already on it will key the
> > transmitter. If I turn the Kam
> > off and back on again the 570 will return to receive. Otherwise the
> > keying works fine.
> >
> > 2. The 570 is an early model SN 80600xxx and has had this problem every
> > sense it
> > was new.
> > A. Kam is hooked to 570 via the 13 pin din connector on rear panel
with 3
> > conductor
> > shielded wire.
> >
> > a. I have the Kam turned on.
> > b. Turn on the 570
> > c. Try to transmit packet, 570 keys up but no output.
> > d. Go to menu #33 (it is set to 1)
> > e. press up or down button and then back to 1
> > f. Try to transmit packet again. Now 570 transmits fine with full
> > output
> > and will keep on doing fine until I turn it off. When I turn it
> > back on I have to
> > go through the whole thing again. Menu #33 DOES NOT change, it
> > stays where
> > I put it.
> >
> > Any help would be greatly appreciated
> > 73 de Tony, KD4K
>.
------------------------------
Date: Tue, 30 Nov 1999 02:26:34 -0700
From: Tate <73KC7ZRU73@cyberhighway.net>
Subject: Kenwood TS-570D and Kam
I think there's an echo in here <g>
Anthony Cash wrote:
>
> Gary,
> Did you have the audio problem also or just the keying problem??
> Thanks for the info.
> 73 de Tony, KD4K
>
#6 of 6
--
KC7ZRU | In Laramie Area
Laramie, WY | UARC Repeater
DN71eh | 146.610
"The Dungeon" online at http://www.cyberhighway.net/~tateb
Remove 73s from addy to send email
>.
------------------------------
Date: Mon, 29 Nov 1999 20:07:14 -0500
From: "Rob" <NoEmail@NoWay.com>
Subject: looking for Kam+ owners
I don't know of any contest logging program that supports KAM PLUS's host
mode for simultaneous RTTY etc and Packet.
There are some terminal programs. Like PacTerm that does support KAM's host
mode.
Most people just end up buying a separate TNC for DX Cluster monitoring.
(Like a cheap MFJ or KPC 3) and connecting it to the Logging program on a
separate port. (e.g. Logic 5)
73'
Rob
"JDY18" <jdy18@aol.com> wrote in message
news:19991129165920.12949.00001386@ng-cn1.aol.com...
> I have been looking for an RTTY logging/contest program to use with my
Kam+.
> Please have suggested either WF1B software or else WriteLog. I have
checked
> with the people who do both these programs and they confirm that neither
one
> will support the Kam+ in dual mode (i.e. simultaneous RTTY and Packet).
> Question - is there some other program out there that will do all of this
or am
> I missing something here that other people have already figured out?
>
> 73 de Jay, W2KD
>.
------------------------------
Date: Mon, 29 Nov 1999 21:31:43 -0800
From: Patricia Gibbons <wa6ube@ix.netcom.com>
Subject: PTC2e on the route...
kruse@gsf.de wrote:
>
> Hello Patricia,
>
> congrates for ur PTC-2e !!!
>
> i see u are nw QRV tooo in pactor-2 mode...
> if u need some info/help write me ... i wrote more then 3000 hotlines @WW
> since 1995 abt PTC-2
> but i'm like U not from SCS hii - and only a normal ham ...
> I also have Clover hr but no STN are QRV in EU and Clover ist not soo
> stabil in QRMM
> like the PTC-2 so i put the clover-pci4000 of the PC ...
> 2. clover works only down to +3dB in the noiselevel but Pactor-2 til -18dB
> or is a PWRfactor of 128 !!!! a big differense !!
> maybe u remember for my comparison graphic abt all Conrollers
>
> I see nw u are interested abt Winlink ...
> there comes soon a new Winlink2000 pgm ...
>
> I also update monthly the @WW Winlink MBOlist and put it in to the nets ...
> also my last update u find always via:
> http://www.scs-ptc.com via ---> <UPDATE{NEWs> botton
> also there is a link to HB9BRJ's ufb converted EXCEL list ..
> (i will attach u the last List)
>
> hope to connect u in the next Mobil-season with QRPP below 100mW also
>
> 73 Alf
>
Well Alf, I'm not QRV on Pactor II yet.. I am looking for info and
I will upgrade to the Pactor II SCS controller at about the same
time as our City of San Jose EOC does the same. I have
a privately-owned emergency comvan that a friend and I restored
and am looking to upgrade it's HF data capability between the
comvan and our EOC. Currently, I have a KAM(E) and our EOC
has a KAM+.
Thanx for the info..
Trish
--
Patricia E. Gibbons
Acting Chief Communications Technician
City of San Jose - ITD/communications
<http://www.qrz.com/callsign.html?callsign=wa6ube>
.......................................
My Public Key is available at:
<http://pgp5.ai.mit.edu:11371/pks/lookup?op=vindex&search=0xEDECB44F>
Key ID: 0xEDECB44F
This key is RSA, NOT Diffie-Hellman !!
Medco3625 163 166 S.E.T. Team USCODE ufo SAS CLOVERLEAF
1080H ERSTER FAMILIE SONDERKOMMANDOC Offizier
>.
------------------------------
End of Ham-Digital Digest V99 #307
******************************
You can send in your contribution to this digest by
sending an e-mail to: hd-group@pa2aga.ampr.org
or (via BBS-net) to: hdaga@pi8vnw.#zh2.nld.eu
Read previous mail | Read next mail
| |
