| |
PA2AGA > HDDIG 12.10.99 15:34l 278 Lines 7709 Bytes #-9721 (0) @ EU
BID : HD_99_257E
Read: DL6KCF GUEST
Subj: HamDigitalDigest 99/257E
Path: DB0AAB<DB0SL<DB0RGB<OK0PPL<OK0POK<9A0YRB<PP5BLU<IW9EXL<SV1AAW<SV1AAW<
EA7URC<PE0MAR<PI8VNW
Sent: 991012/0946Z @:PI8VNW.#ZH2.NLD.EU #:7521 [HvHolland] FBB7.00g $:HD_99_257
From: PA2AGA@PI8VNW.#ZH2.NLD.EU
To : HDDIG@EU
Received: from pa2aga by pi1hvh with SMTP
id AA21149 ; Tue, 12 Oct 99 09:11:26 UTC
Received: from pa2aga by pa2aga (NET/Mac 2.3.67/7.5.3) with SMTP
id AA00016348 ; Tue, 12 Oct 99 07:47:17 MET
Date: Tue, 12 Oct 99 07:44:22 MET
Message-Id: <hd_99_257E>
From: pa2aga
To: hd_broadcast@pa2aga
Subject: HamDigitalDigest 99/257E
X-BBS-Msg-Type: B
that section of 20M is maritime mobile PACTOR links to BBS systems,
for the purpose of sending and receiving internet email.
Probably the best controller for the PACTOR modes is the SCS PTC-II
(also available from PACCOM).
--
... Hank
http://horedson.home.att.net
>.
------------------------------
Date: 10 Oct 1999 01:37:59 GMT
From: Hamish Moffatt <hamish@rising.com.au>
Subject: PACTOR or AMTOR
Ralph Mowery <rmowery@dialpoint.net> wrote:
> YOu should be able to find some sound card programs to decode them and
> you won't have to buy a seperate 'modem' for them.
I wish I could -- the sound card is my preferred route. I am already doing
1200 packet (on VHF) and PSK31 and Hellschreiber (on HF) using the sound
card. The only program I've seen which does PACTOR on the sound card
is "PSATOR" for DOS, which only runs on Personal Sound Architecture
sound cards. I use a plain SB16, so I can't use it, and there was no
source code with it.
Hamish
--
Hamish Moffatt Mobile: +61 412 011 176 hamish@rising.com.au
Rising Software Australia Pty. Ltd. http://www.risingsoftware.com/
Phone: +61 3 9894 4788 Fax: +61 3 9894 3362 USA: 1 888 667 7839
>.
------------------------------
Date: 10 Oct 1999 01:38:22 GMT
From: Hamish Moffatt <hamish@rising.com.au>
Subject: PACTOR or AMTOR
Bob Lewis <aa4pb@erols.com> wrote:
> You can use a sound card for RTTY, Amtor, and Pactor but I don't
> believe you'll find sound card software for Clover or Pactor-II.
What do you recommend for AMTOR and PACTOR on the sound card?
thanks
Hamish VK3SB
--
Hamish Moffatt Mobile: +61 412 011 176 hamish@rising.com.au
Rising Software Australia Pty. Ltd. http://www.risingsoftware.com/
Phone: +61 3 9894 4788 Fax: +61 3 9894 3362 USA: 1 888 667 7839
>.
------------------------------
Date: Sun, 10 Oct 1999 23:54:53 +1000
From: "Shane Deering" <sdeering@vic.australis.com.au>
Subject: PACTOR or AMTOR
Hamish Moffatt <hamish@rising.com.au> wrote in message
news:7toqme$29c8$2@arachne.labyrinth.net.au...
> Bob Lewis <aa4pb@erols.com> wrote:
> > You can use a sound card for RTTY, Amtor, and Pactor but I don't
> > believe you'll find sound card software for Clover or Pactor-II.
>
> What do you recommend for AMTOR and PACTOR on the sound card?
>
>
> thanks
> Hamish VK3SB
> --
> Hamish Moffatt Mobile: +61 412 011 176 hamish@rising.com.au
> Rising Software Australia Pty. Ltd. http://www.risingsoftware.com/
> Phone: +61 3 9894 4788 Fax: +61 3 9894 3362 USA: 1 888 667 7839
Just checked http://www.muenster.de/~welp/sb.htm and there were a couple of
DOS programs for PACTOR.
Anyone know of PACTOR software for windows?
Any other SB digital software for windows not listed on that site?
--
Shane Deering
Packet VK3BVP@VK3BVP.#SEV.VIC.AUS.OC
EMAIL sdeering@vic.australis.com.au
ICQ.# 46641156
>.
------------------------------
Date: Sat, 9 Oct 1999 22:45:17 -0400
From: "Bob Lewis" <aa4pb@erols.com>
Subject: PACTOR or AMTOR
I don't think Paccom makes their Pactor-II controller any more. If
you find a used one run away fast! They have some bugs that Paccom
cannot (or will not) correct and there is no guarantee that they will
be compatible with the newer SCS firmware upgrades.
Hank Oredson <horedson@att.net> wrote in message
news:7toq4m$8fh$1@bgtnsc01.worldnet.att.net...
>
> Hamish Moffatt <hamish@rising.com.au> wrote in message
> news:7tmsb4$hfi$1@arachne.labyrinth.net.au...
> > On 20m at about 14.065 MHz I hear a lot of digital signals --
> > are these PACTOR or AMTOR or something else? They sound phase
shift keyed
> > (like PSK31) but not continuous (bursty). I'm curious to know
what
> > they are so I can consider buying a modem for it.
>
> Mostly PACTOR-II on that frequency, but occasionally PACTOR-I.
> CLOVER not generally used there. A good deal of the activity in
> that section of 20M is maritime mobile PACTOR links to BBS systems,
> for the purpose of sending and receiving internet email.
>
> Probably the best controller for the PACTOR modes is the SCS PTC-II
> (also available from PACCOM).
>
> --
>
> ... Hank
>
> http://horedson.home.att.net
>
>
>
>.
------------------------------
Date: Sat, 9 Oct 1999 22:50:16 -0400
From: "Bob Lewis" <aa4pb@erols.com>
Subject: PACTOR or AMTOR
I'm using an SCS PTC-II here so I'm not qualified to recommend
anything for the sound card. I do know that I've seen sound card
stuff for Amtor and Pactor on the Internet but I believe they were
DOS programs. I doubt that the sound card DSP is fast enough to
handle Pactor-II or Clover processing.
Hamish Moffatt <hamish@rising.com.au> wrote in message
news:7toqme$29c8$2@arachne.labyrinth.net.au...
> Bob Lewis <aa4pb@erols.com> wrote:
> > You can use a sound card for RTTY, Amtor, and Pactor but I don't
> > believe you'll find sound card software for Clover or Pactor-II.
>
> What do you recommend for AMTOR and PACTOR on the sound card?
>
>
> thanks
> Hamish VK3SB
> --
> Hamish Moffatt Mobile: +61 412 011 176
hamish@rising.com.au
> Rising Software Australia Pty. Ltd.
http://www.risingsoftware.com/
> Phone: +61 3 9894 4788 Fax: +61 3 9894 3362 USA: 1 888 667
7839
>.
------------------------------
Date: Sat, 9 Oct 1999 21:46:06 -0700
From: "Hank Oredson" <horedson@att.net>
Subject: PACTOR or AMTOR
Thanks for the hint.
Am indeed considering a PTC-II in the near future.
--
... Hank
http://horedson.home.att.net
Bob Lewis <aa4pb@erols.com> wrote in message
news:7touk6$em$1@autumn.news.rcn.net...
> I don't think Paccom makes their Pactor-II controller any more. If
> you find a used one run away fast! They have some bugs that Paccom
> cannot (or will not) correct and there is no guarantee that they will
> be compatible with the newer SCS firmware upgrades.
>
> Hank Oredson <horedson@att.net> wrote in message
> news:7toq4m$8fh$1@bgtnsc01.worldnet.att.net...
> >
> > Hamish Moffatt <hamish@rising.com.au> wrote in message
> > news:7tmsb4$hfi$1@arachne.labyrinth.net.au...
> > > On 20m at about 14.065 MHz I hear a lot of digital signals --
> > > are these PACTOR or AMTOR or something else? They sound phase
> shift keyed
> > > (like PSK31) but not continuous (bursty). I'm curious to know
> what
> > > they are so I can consider buying a modem for it.
> >
> > Mostly PACTOR-II on that frequency, but occasionally PACTOR-I.
> > CLOVER not generally used there. A good deal of the activity in
> > that section of 20M is maritime mobile PACTOR links to BBS systems,
> > for the purpose of sending and receiving internet email.
> >
> > Probably the best controller for the PACTOR modes is the SCS PTC-II
> > (also available from PACCOM).
> >
> > --
> >
> > ... Hank
> >
> > http://horedson.home.att.net
> >
> >
> >
>
>
>.
------------------------------
Date: Sun, 10 Oct 1999 05:41:18 -0500
From: "Charles Brabham" <n5pvl@texoma.net>
Subject: The BBS network and tcp/ip.
D. Stussy <kd6lvw@bde-arc.ampr.org> wrote in message
news:Pine.LNX.4.10.9910100416200.671-100000@dns.bde-arc.ampr.org...
..
> - Web pages: Only text-only pages of probably no more than 4k should
> be allowed - all others should probably be banned. (size could be
adjusted)
See the article "HTML and Packet Radio" at my web-site. Just push the
To be continued in digest: hd_99_257F
Read previous mail | Read next mail
| |
