| |
G4APL > GPS 18.06.06 23:25l 53 Lines 1620 Bytes #999 (0) @ WW
BID : 25028G4APL
Read: DB2OY GUEST DD3IA
Subj: Re: Connecting Garmin to thd7e
Path: DB0FHN<DB0FOR<DB0MRW<DK0WUE<DB0RES<ON0AR<GB7CIP<GB7CIP<GB7CIP
Sent: 060618/2216Z @:GB7CIP.#32.GBR.EU $:25028G4APL
T:From: Paul Lewis <g4apl@gb7cip.ampr.org>
T:Newsgroups: ampr.coms.gps
T:Message-Id: <e74jba$4hd$1@gb7cip.ampr.org>
On the THD7E addenum Sheet TH-D7 B62-1121-00
Connecting with a GPS Receiver
The GPS jack on this transceiver accepts a 2.5mm (1/10) 3 conductor plug
Using supplied GPS cable
Tip=1 White to RXD on GPS
Middle=2 Red TXD tp GPS
Ground=3 Shield GND to GPS
if using a Garmin GPS receiver select the following parameters in INTERFACE
sub menu on the receiver
NMEA
NMEA 0183 2.0
4800 Baud
Not tried connecting a GPS to our THD7e's
73 Paul g4apl
g0cer%gb7max.#28.gbr.eu@gb7cip.ampr.org wrote:
> From: G0CER@GB7MAX.#28.GBR.EU
> To : GPS@WW
> I have a Garmin GPS38 and THD7e I would like to connect the two.
> I have the plug for the GPS end and know the pinouts for that.
> What is the pinout at the radio end, please - it's a 2.5mm jack-socket.
> I have done a Google translation from a website and suspect the wiring is
> tip = gnd
> middle (nearest tip) = RX
> Outer = TX
> Can anyone confirm this or tell me the correct wiring.
> tnx
> Dave G0CER
> g0cer@gb7max.#28.gbr.eu
> davekh@gmail.com
> ________________________________
> http://www.shropshire.lug.org.uk
--
73 de Paul telnet 62.49.17.234 6301 amprnet Web http://gb7cip.ampr.org
amprnet g4apl@gb7cip.ampr.org[44.131.244.1] IP co-ordinator UK subnets
London Home Countries, West Sussex, East Surrey, Hants, Dorset, S Wilts
AX25 NTS g4apl @ gb7cip.#32.gbr.eu internet paul@skywaves.demon.co.uk
http://www.theskywaves.net IP AX25 GB7CIP HF_PACTOR MARK Frequencies
7.041.5MHz 14.110.5MHz 21.112Mhz USB International GWay
Read previous mail | Read next mail
| |
