OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
G0FTD  > SONY     26.05.03 19:42l 32 Lines 1027 Bytes #999 (0) @ WW
BID : 531775G0FTD
Read: GUEST DB0FHN
Subj: SW100 flexistrip experiences ?
Path: DB0FHN<DB0RGB<OK0PPL<DB0RES<ON0AR<VE3FJB<IK6PYS<IS0HHA<IK1ZNW<GB7CRV<
      GB7CIP<GB7SXE
Sent: 030526/1403Z @:GB7SXE.#38.GBR.EU #:3103 [Hastings] FBB7.00i $:531775G0FTD
From: G0FTD@GB7SXE.#38.GBR.EU
To  : SONY@WW


Greetings !

I've had 2 of these receivers and RF performance has always been superb.

Now receiver number 1 (early version) I had for 1 year before the 
flexistrip broke that connects the two halves of the receiver together.

This resulted in an unusable after 1 year. The cost of the flexi strip
was exepensive (about œ20). I was not impressed. It seems that the
method used to construct the receiver always means the flexistrip gets
pinched and damaged. After a year of flexing it breaks.

Sony had a lot of complaint about this, and apparently made alterations
to the design.

I bought a later model which I have had for 3 years with (so far) no
problems, so it may well be that Sony cured the problem.

What I would like to know is has ANYONE ELSE purchased this receiver
recently and have there been any problems ?

I would like to know just in case this seconds receiver is ok because I've
been lucky or that the problem was genuinly cured.

- Andy -

(A KB2VXA free zone)


Read previous mail | Read next mail


 27.09.2026 01:05:12lGo back Go up