| |
VK7AX > XFBB 17.11.07 00:34l 241 Lines 6903 Bytes #999 (0) @ WW
BID : VK7AX-1311BH
Read: GUEST
Subj: xfbb Digest, Vol 32, Issue 3
Path: DB0FHN<DB0RGB<DB0SL<DB0FSG<I4UKI<IR1UCR<IW2OAZ<IR2UBX<IR2UBX<IK2XDE<
ON4HU<F1HPZ<F4BWT<F4DUR<CX2SA<ZL2BAU<VK7NW
Sent: 071112/2204Z @:VK7NW.#ULV.TAS.AUS.OC #:29582 [NWTARIG] FBB7.00g $:VK7AX-1
From: VK7AX@VK7NW.#ULV.TAS.AUS.OC
To : XFBB@VKNET
Today's Topics:
1. Unproto Beacons (Peter Mallett)
2. Re: Unproto Beacons (Ray Wells)
3. Re: Unproto Beacons (Peter Mallett)
4. Re: Unproto Beacons (Ray Wells)
----------------------------------------------------------------------
Message: 1
Date: Mon, 12 Nov 2007 18:17:46 +1300
From: Peter Mallett <zl2bau@zl2bau.co.nz>
Subject: [xfbb] Unproto Beacons
To: 'List for the LINUX version of FBB' <xfbb@f6fbb.org>
Hi All,
I am having a problem with _Unproto Beacons_ from xfbb and
wonder if any one could help ?
Xfbb here runs on the first computer which is linked to a second
computer running Xrouter via an AXIP link, Xrouter has all the internet
links and radio ports on it.
When new mail arrives on the BBS, it sends an Unproto frame as it should
and it is also sent on the radio ports as configured, now what I can`t
get it to do is to send the unproto frames via the local digipeater as
in the path for the UI frames.
Is there a default in xfbb that can be changed for the unproto path ???
This could very well be an xrouter problem on the node ports but at this
stage, I am a bit lost as to an answer.
Any help would be appreciated.
Regards ..... Peter zl2bau
------------------------------
Message: 2
Date: Mon, 12 Nov 2007 16:41:21 +1100
From: Ray Wells <vk2tv@exemail.com.au>
Subject: Re: [xfbb] Unproto Beacons
To: List for the LINUX version of FBB <xfbb@f6fbb.org>
Hi Peter,
Peter Mallett wrote:
> >Hi All,
> >
> > I am having a problem with _Unproto Beacons_ from xfbb and
> >wonder if any one could help ?
> >
> >Xfbb here runs on the first computer which is linked to a second
> >computer running Xrouter via an AXIP link, Xrouter has all the internet
> >links and radio ports on it.
> >
> >
Electricity must be cheap in ZL, hi.
> >When new mail arrives on the BBS, it sends an Unproto frame as it should
> >and it is also sent on the radio ports as configured, now what I can`t
> >get it to do is to send the unproto frames via the local digipeater as
> >in the path for the UI frames.
> >
> >Is there a default in xfbb that can be changed for the unproto path ???
> >
> >This could very well be an xrouter problem on the node ports but at this
> >stage, I am a bit lost as to an answer.
> >
> >Any help would be appreciated.
> >
> >
Have you added the digi path to /etc/ax25/fbb/inittnc#.sys, where # is
the TNC number - 1, 2, etc
The standard line is C MAIL but the docs say you can use C MAIL VIA
<digicallsign> to send via a digi. I've not had the need to try this so
can't attest to its vaildity.
> >Regards ..... Peter zl2bau
> >
> >_______________________________________________
> >xfbb maillist - xfbb@f6fbb.org
> >http://mailman.f6fbb.org/mailman/listinfo/xfbb
> >
> >
> >
Cheers . Ray vk2tv
------------------------------
Message: 3
Date: Mon, 12 Nov 2007 21:29:51 +1300
From: Peter Mallett <zl2bau@zl2bau.co.nz>
Subject: Re: [xfbb] Unproto Beacons
To: List for the LINUX version of FBB <xfbb@f6fbb.org>
Ray Wells wrote:
> > Hi Peter,
> >
> > Peter Mallett wrote:
> >
> >
>> >> Hi All,
>> >>
>> >> I am having a problem with _Unproto Beacons_ from xfbb and
>> >> wonder if any one could help ?
>> >>
>> >> Xfbb here runs on the first computer which is linked to a second
>> >> computer running Xrouter via an AXIP link, Xrouter has all the internet
>> >> links and radio ports on it.
>> >>
>> >>
>> >>
> > Electricity must be cheap in ZL, hi.
> >
> >
>> >> When new mail arrives on the BBS, it sends an Unproto frame as it should
>> >> and it is also sent on the radio ports as configured, now what I can`t
>> >> get it to do is to send the unproto frames via the local digipeater as
>> >> in the path for the UI frames.
>> >>
>> >> Is there a default in xfbb that can be changed for the unproto path ???
>> >>
>> >> This could very well be an xrouter problem on the node ports but at this
>> >> stage, I am a bit lost as to an answer.
>> >>
>> >> Any help would be appreciated.
>> >>
>> >>
>> >>
> > Have you added the digi path to /etc/ax25/fbb/inittnc#.sys, where # is
> > the TNC number - 1, 2, etc
> >
> > The standard line is C MAIL but the docs say you can use C MAIL VIA
> > <digicallsign> to send via a digi. I've not had the need to try this so
> > can't attest to its vaildity.
> >
> >
>> >> Regards ..... Peter zl2bau
> > Cheers . Ray vk2tv
> >
> > _______________________________________________
Hi Ray,
Thanks for the feedback, I had already tried that but as I
don`t use a TNC on the BBS, the inittncx.sys doesn`t appear to be used
by the AXIP link.
I guess I should take the bull by the horns and give setting up the node
on linux a try but then I would have to change the radio ports over as
well which would be a big job for someone who doesn`t know enough about
linux as yet, Hi Hi.
As for the power Ray, they deliver it wrapped in gold leaf, Hi Hi.
Regards ..... Peter
------------------------------
Message: 4
Date: Mon, 12 Nov 2007 20:38:05 +1100
From: Ray Wells <vk2tv@exemail.com.au>
Subject: Re: [xfbb] Unproto Beacons
To: List for the LINUX version of FBB <xfbb@f6fbb.org>
Hi Peter,
I see your problem. I use axudp and it handles unprotos ok.
If you're seriously considering a node on the Linx machine you should
consider fpac which provides exactly the same functionality as the
standard Linux node (it's the same code so it should) and it also
includes a brilliant implementation of Rose. The code is under active
development by F6BVP and there's an active mailing list with some
helpful guys who are keep to see network expansion.
You need to run libax25, ax25-tools and ax25-apps but they're available
as deb package although compiling from sources s preferable. The
development packages are a cinch to install with apt-get and compiling
is an easy task made easier thanks to Bernard F6BVP who has produced a
howto.
I can offer considerable help as well.
If you're tempted just drop me a note, either on or off list.
Cheers .. Ray vk2tv
> >Hi Ray,
> >
> > Thanks for the feedback, I had already tried that but as I
> >don`t use a TNC on the BBS, the inittncx.sys doesn`t appear to be used
> >by the AXIP link.
> >
> >I guess I should take the bull by the horns and give setting up the node
> >on linux a try but then I would have to change the radio ports over as
> >well which would be a big job for someone who doesn`t know enough about
> >linux as yet, Hi Hi.
> >
> >As for the power Ray, they deliver it wrapped in gold leaf, Hi Hi.
> >
> >Regards ..... Peter
------------------------------
_______________________________________________
xfbb maillist - xfbb@f6fbb.org
http://mailman.f6fbb.org/mailman/listinfo/xfbb
End of xfbb Digest, Vol 32, Issue 3
***********************************
Read previous mail | Read next mail
| |