OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
PA3AKK > FBB      14.04.06 11:35l 85 Lines 3263 Bytes #999 (0) @ WW
BID : 53042_PI8CDR
Read: OM3PV GUEST
Subj: Re^2: VK2ZRG: Last message listed.
Path: DB0FHN<DB0RGB<DB0AAB<DB0FSG<DB0ZKA<DB0GPP<DB0KTL<DB0ZDF<DB0LJ<DB0RES<
      PI8DAZ<PI8CDR
Sent: 060414/1028Z @:PI8CDR.#DRE.NLD.EU #:53042 [Beilen] $:53042_PI8CDR
From: PA3AKK@PI8CDR.#DRE.NLD.EU
To  : FBB@WW


Hi Ralph,

Here an extract from the help-instructions. Some of the outputs (most !, I and
wildcard commands) depend on the configuration by the sysop, so not on all
FBB-bbs-systems the outputs are of the same type:

(1) PI8CDR BBS>

List of available commands:
A : Abort      - Abort listing.
B : Bye        - Log off the BBS.
C : Conference - Access to conference.
D : DOS        - Access to FBBDOS, or to download a file.
F : FBB        - Access to the server mode.
G : Gateway    - Access to the other frequences by 'gateway'.
H : Help       - Help.
I : Info       - Information about the system.
J : Jheard     - List of the last few connected stations.
K : Kill       - Kill messages.
L : List       - List messages.
M : Make       - Copy a message to a file.
N : Name       - Change your name.
NZ: Zip        - State your zip-code.
NH: homeBBS    - Type your home-BBS.
O : Option     - Select options (paging, language, list/read personal etc).
PS: Servers    - Show which servers are available in this BBS.
PG: Program    - Run (show) certain DOS-programs.
R : Read       - Read messages.
S : Send       - Send messages.
T : Talk       - Talk to SYSOP.
U : Upload     - Upload a file to the BBS.
V : Verbose    - Verbose read of messages (like R, but with forwarding 
                 headers).
W : What       - Which files are available.
X : Expert     - Change between Normal and Expert.
Y : Yapp       - Transfer binary files with the Yapp transfer protocol.
Z : Delete     - Delete a file.
+ : Append     - Only for sysops:  Append a file after a message.
> : Send text  - To send a text to another station connected to the BBS.
= : Connect    - To connect another station connected to the BBS.
! : Info       - Short version of the I-command.
$ : Forwardet  - Only for sysop: Show what BBSs that will receive, or
                 already have received a message.
* : Wildcard   - Many possibilities, like @,?,#,=,*

For detailed help on each command, type ? [command].
(1) PI8CDR BBS>

- Type ? [COMMAND] for HELP with a command.
Examples:
 - type ? H for a list of all the most common commands.
 - type ? O for help on available options (languages, paging etc).
   (Paging is toggled on/off with the OP command)
 - Type ? REQDIR or ? REQFIL for help on these servers.
Remember to press <Enter> or <Return> after each command (hi).

X toggles your status between EXPERT and NORMAL user.
A can be used to abort listings.
I shows information about this system.
Last used message-number can be repeated with the use of the #-character.
Example:  R 1235.  Next command: K #

For SYSOP:  Overview of all commands for sysop with ? SYSOP.
            Overview of all the function-keys with ? FUNCTION.

(1) PI8CDR BBS>

The "B" command logs you off the PBBS and disconnects you.
- Type "B"  to LOG OFF gracefully [Bye].
  (You may also type the full word BYE)
Be sure to hit <Enter> or <Return> after each command.

- NOTE:  When you use B to disconnect, your last listet message (from this
  session) is being saved till next connect.  If for some reason you are
  disconnected, this last-listed parameter is not changed.  You can
  reconnect and relist the same messages once more.

(1) PI8CDR BBS>

73, Wim


Read previous mail | Read next mail


 18.11.2026 00:39:33lGo back Go up