OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
VK3OT  > EME      27.12.95 11:43l 156 Lines 8295 Bytes #-11288 (0) @ WW.#
BID : 1597_VK3RMV
Read: DL5MAE DF7RG DL2SAX GUEST
Subj: N6AMG/CU3, CN2JP 2M EME Story.
Path: DB0AAB<DB0MWS<DB0LAN<DB0ABH<DB0BOX<DB0MAK<DB0PV<DB0WGS<OE3XSR<OK0NKT<
      OE1XGR<HA1VH<HA5OB<HA3PG<VE4KV<KA6EYH<VK2TLH<VK3BBS<VK3RMV
Sent: 951226/0342 @:VK3RMV.#WEV.VIC.AUS.OC #:1597 [PMS VK3SIX]

I have had this story in my files for several years now, and as it has not been
published, to the best of my knowledge, I have uploaded it, to give EME ops
world wide an insight into a much misunderstood amateur, who chose to go
expeditioning instead of seeking treatment for terminal leukemia.

               2M PRESS RELEASE FOR CN2JP AND CU3/N6AMG

     The purpose of this 2M DX-Pedition was to give two new
countries out to 2M stations for DXCC purposes.  The CN operation
was the first ever EME done in Morocco.  Actually the 2M EME was a
last minute thought that K6MYC, KB8RQ and WB5LBT motivated me to
do.  

     The antenna portion of the station used four 8 element M
SQUARED prototype Yagis.  The length of each Yagi is 13.6 feet. The
feed was a LC universal match that was very difficult to set up
every time.  The 4 phasing lines were 75 ohm high velocity foam
CATV coax with F connectors on each end.  This went to the F
connector Ts then to a 75 ohm matching harness that was also CATV
coax and F connectors.  This was then connected to 40 feet of 9913
that was connected into a bird watt meter.  This antenna system
including the H frame was borrowed from K6MYC.  Mike used this
antenna in Ponepai some years ago.

     The radio equipment was a TR-751 with two RF Concepts 2-117
amplifiers in parallel.  They were combined with Wilkinson dividers
for 360 watts out.  The keyer was an old resurrected MFJ
grandmaster with a 120 minuter sequence timer.  The last time this
keyer was used was when I was on 2 meter EME. The rig and one amp
were lent to me by WB5LBT and the other amp and power divider were
lent to me by W6JKV.

     The mechanical portion was very light and compact.  The 4
antennas, H frame and 12 feet of mast with tripod would fit in a 40
inch camera tripod bag.  The whole 2M system without rotators
weighed 30 pounds.  The KR-500 was used for elevation and the HD-73
was used for azimuth.  The rotor cable was telephone station wire. 
The system survived continuous pounding by winds up to 50 MPH and
rain.

     The system heard very well, with the only stations not heard
were the ones that never made the schedule.  Four yagi stations
like K6MYC and W7HAH were nearly always 519 copy for long periods
of time.  The big stations many times would not disappear through
a faraday rotation when conditions were good.  My moon set at CN
was not as successful as elevated even though there was 3000 miles
of water under the antenna.  I never heard my own echos.  If I had
a 1 KW amplifier life would have been much easier.  Including 6M
the total weight carried was about 440 pounds.  CU had no set or
rise.  Also the over head open wire telephone cable killed anything
past about 220 degrees.

     When the wind got up above 50 MPH I had some problems.  On the
morning of December 3 I woke up to an EME array sitting on it's
side.  In a major down pouring I stood the array back up and went
back in the house off of the air due to cable problems.  Otherwise
the array had suffered no major damage.  I couple of hours later I
went back outside and found that the array had blown over again. 
At this point I was ready to give up and take the array apart.  In
close examination the array was a little more bent up than before
but there was no major damage.  I put the array back up for the
second time and fixed all the bent elements and aligned the yagis
back up.  I think what saved the system was the fact that the yagis
slipped into a hose clamped swedged section and was allowed to
rotated if any force was put on it.  I repaired one of the F
connecter TEES and the SWR was back to normal.  Also while
recalibrating the azimuth and elevation on the sun, I found the sun
noise to be about the same as before.  I used the array on FM that
evening and it seemed fine.  My motivation for all of this was one
day of schedules and the hope of working K6MYC.  The array was
confirmed working with a sched with AF9Y, although we never
completed.

     In CN the following stations were worked in the order as
presented:  WB5LBT, W5UN, SM7BAE, SM5FRH, HB9CRQ, I2FAK, KB8RQ,
DL8DAT, N5BLZ, W7FN, K1WHS, K2GAL, K1MNS, K9MRI, W4ZD, W7HAH, KI3W,
W0HP, N1BUG, KD8SI, AND K6MYC. Also CN8ST and ZB0T was worked on
tropo.  The following stations were worked in CU: WB5LBT, K2GAL,
W7HAH, KD8SI, KB8RQ, I2FAK, SM7BAE AND SM5FRH.  Also CU3AK on tropo
from one end of the island to the other.

     This expedition synopsis requires some commentary.  One must
experience the expedition side to understand some of the
frustrations that I went through.  One problem was someone was
sending on my frequency on 28.  I am not sure what that would
accomplish since I made sure every QSO was good and clean.  So I
was not sure whether the other station was leading the QSO in the
hope I would go along or there was really someone shadowing me. 
Also I believe that when someone has to ask me if the QSO was good
then the QSO by definition was no good.  This happened many times. 
Another problem was that people would call me during schedules
thinking that the contact was finished because the other station
was sending Rs.  This made things very difficult.  At the beginning
of this expedition I set the rules.  Since I am the DX following my
rules are mandatory.  This gives everyone the same chance and keeps
things fair for all.  Don't follow the rules and you loose.  Also
I tried to sched both Europe and North America evenly.  The other
amazing thing was why W5UN who had a confirmed QSO would call me
the next day on top of someone else's sched.  I find this selfish
lack of discipline outrageous and the 2M EME community should not
stand for this type of operating.  The kind of operating that I
respect was when AF9Y after failing to make a sched listened to me
the next day and heard me well.  He purposely held back his desire
to call me on someone else's sched.  This is the kind of operating
that should be emulated.  

     One last comment about operating procedures.  When one is
trying to work a marginal station like mine, the sequence procedure
should very carefully be followed.  For instance when sending ROs
don't send calls at the end and beginning of the 2 minute period. 
The same goes for Rs.  While sending Os don't end with calls.  If
you need to ID do it on top of me but not during the sequence I am
listening to.  I also found people off of my frequency up to 1.5
Khz.  I went through a very careful tune up on the TR-751 to insure
that it would be on frequency at the expected room temperature.  In
this day and age of technology being on frequency is an expectation
not luxury.  

     Now that I am off the soapbox I would like to thank a couple
of people and comment on the experience.  WB5LBT was most dedicated
to my operation and I thank him for this.  HB9CRQ who was very
helpful during the CN operation.  K6MYC helped with the antennas. 
Thankyou to the many stations who helped pass traffic to the US for
me.  My Father built the mast and tripod when I was running out of
hours in the day.  CN8ST made all of the CN arrangements and CN8BC
and CN8LI supplied the summer villa on the coast.  CN8ST will be
getting on 2M in the next 6 months to a year and maybe on EME
someday.  

     CU3AK made all of the CU arrangements and showed me around the
island.  CU3AA also entertained me as well as putting himself at my
disposal. 

     To all thankyou for the help, without it success would have
been less and meant less.

     I found the experience fun, educational and frustrating.  I
enjoyed working the many EME friends that I have known for over 12
years.  I learned about the people on 2M EME good and bad.  I
learned about how I might operate next time and how the equipment
can be improved.  The frustration level was the unpleasant part of
the experience.  This was my fault because I take this hobby to
serious sometimes and allow it to enter my emotions.  Well this is
just my nature.  Visiting Morocco again was the highlight due to
the many personal friends that I made last year and this.  It was
very sad to leave them.  Terceira Azores was a very beautiful and
interesting place.  Unfortunately I was there in the winter and
nice weather was not in my stars.  Will I do it again??  Yes I will
if luck is with me.

73s 
JPal




Read previous mail | Read next mail


 22.11.2026 19:54:33lGo back Go up