| |
PA3GWY > DAMA 11.01.96 13:20l 59 Lines 1864 Bytes #-10650 (0) @ EU
BID : 62373_ON6AR
Read: DF7NZ GUEST
Subj: DAMA + KAM PLUS
Path: DB0AAB<DB0MWS<DB0RBS<DB0GE<LX0PAC<ON7RC<ON1BWP<ON6AR
Sent: 960111/1109Z @:ON6AR.#AN.BEL.EU #:62373 [Antwerpen] FBB5.15c $:62373_ON6A
From: PA3GWY@ON6AR.#AN.BEL.EU
To : DAMA@EU
Hello OM's
Here a brief message about DAMA for Kantronics.
What do you have to do and to know if you order an update at your local
dealer.
A.] DAMA slave mode protocol is only available for the KAM with
ENHANCEMENT BOARD, the KAM Plus, the KPC-3 and the KPC9612.
The old units like the old KAM, KPC-2 and KPC-4 aren't update.
(The only way the KAM can be updated to include DAMA, is by
installation of the ENHANCEMENT BOARD. )
B.] New units of the ENHANCEMENT BOARD and KAM Plus (version 8.0)
and the KPC-3 and KPC9612 (version 6.0) as well as the updates
for these units are now shipping with DAMA slave mode INCLUDED.
C.] The EPROM update for the ENHANCEMENT BOARD is version 8.0E.
The EPROM update for the KAM Plus is version 8.0P.
**********************************************
******* THEY ARE NOT INTERCHANGEABLE *******
**********************************************
So, E version for ENHANCEMENT BOARD and P version for KAM Plus.
----------------- --------
Many people think they have a KAM Plus but look very carefully.
It is very important to order the right EPROM.
How can you see the difference? Very simple.
*******************************************************
******* THE KAM PLUS HAS THE EXTRA YELLOW LED *******
*******************************************************
-------------------------------------------------
Order the right EPROM at your local dealer.
-------------------------------------------------
If you order what do you get?
- An EPROM
- Disk with Host Master II+ ( version 3.4 )
- Manual addendum ( 20 pages )
73 de PAT PA3GWY/AA2ZE
Read previous mail | Read next mail
| |
