| |
DJ1IJ > CLOVER 05.12.96 14:10l 116 Lines 3449 Bytes #-10321 (0) @ DL
BID : 05C608DB0DNI
Read: DJ3MU DG1CAY DF7ML DL1MFK GUEST
Subj: XPwin Udate ist da:1.1.3
Path: DB0AAB<DB0PV<DB0MAK<DB0SON<DB0RSV<DB0ERF<DB0DNI
Sent: 961205/1155z @:DB0DNI.#NDS.DEU.EU [Salzgitter JO52FD] $:05C608DB0DNI
de DJ1IJ @ DB0DNI.#NDS.DEU.EU (Hans)
to CLOVER @ DL
HISTORY FILE FOR XPWARE FOR WINDOWS!
--------------------------------------
Version 1.1.3 Movember 27, 1996
- Program now reverts back to the last displayed port
or controller on program startup.
- Program now displays the type of CD Rom callbook found.
This was done for diagnostic purposes.
- Corrected problem with Pactor/Clover binary file transfers
when link was aborted. Program would not start another
file transfer correctly until the program was restarted.
This is corrected.
- Added TimeZone and Offset adjustments to XPWIN. This
option is available in the Setup Menu. If you
station location is east of Greenwich England check
the box, if not leave this box open.
All changes made are immediate.
- Modified program startup for SCS - PTC-II controllers.
The program now issues carriage returns to the controller
to initilize the autobaud routine.
- Modified binary file screen updates.
- Added ZIP code to callsign lookup (ALT-Y).
- Modified operation of ALT-L key for Paccomm/SCS Controllers.
Program now toggles between Listen Mode (FEC) and Monitor Mode
(ARQ).
Version 1.1.2 September 20, 1996
- Corrected AEA mailbox operation when viewing large mailbox
messages.
- Corrected program initialization problems with certain AEA controllers
namely DSP232 and PK232 with lastest ROM upgrades.
- Added CW operation mode for Paccomm/SCS controllers. Operation
is currently limited to full breaking operation.
- Modified Pactor Listen and Pactor Standby for KAM controllers.
Program now set Monitor On when entering Pactor Listen and
Monitor Off when entering Pactor Standby.
- Modified ESC[A and ESC[B support in ANSI, program was
not reacting correctly when the command was given without
position parameters.
Version 1.1.1 September 20, 1996
- Added polling for the Yaesu FT-1000MP radio. The polling
interval is 10 seconds.
- Modified RTTY operation for HAL controllers. The program
will now continue to transmit until either the Page Down,
End Key or Receive Macro is encountered.
- Fixed ESC[A and ESC[B support in ANSI.
- Aborting CQ (F5) now clears transmit buffer and places
TNC back into receive or listen mode.
- Added color support for receive and transmit windows
this is selectable under the setup menu. Select
Window Colors. User can define Port 1, Port 2 and Packet
windows separately.
- Corrected callsignntry for user of AEA maildrop.
- Program now returns focus to the transmit window when
the log book (F3) is closed.
- Corrected header in Edit Tnc Parameter File.
Was stating "Load Parameter File".
- Connect List now working in ASCII, BAUDOT, CW and Clover
modes.
- Added Connect / Disconnect messages for HAL controllers. This
is displayed in the command view window (center window of port).
- Program now accepts with FULL callsign or SELCAL when entering
an AMTOR ARQ Connect. KF7XP or KFXP are both now valid.
- Clover ARQ connect box now default to the adaptive control
not manual.
- Amtor and Pactor Standby menu selections new work correctly
for Hal Controllers.
- Program now supports display of Monitored Calls in Clover mode.
Version 1.1.0 Spetember 3, 1996
- Initial public release of XPWIN.
73 Hans DJ1IJ: frohen Advent!
Current time is 11:57 UTC on 5-Dec-96.
Read previous mail | Read next mail
| |
