| |
I0OJJ > BPQ 29.04.20 16:04l 93 Lines 2977 Bytes #-2344 (0) @ WW
BID : 076C0_I0OJJ
Read: DJ6UX DF7EAV GUEST
Subj: Re: Compiling LinBPQ Beta on 64bit systems
Path: DB0FHN<DB0RBS<DB0GOS<DB0EEO<DB0RES<DB0ERF<IZ3LSV<I3XTY<I0OJJ
Sent: 200429/1355z @:I0OJJ.ITA.EU [Rome] #:8634 $:076c0_I0OJJ
Hi,
On 4/29/20 12:16 PM, pe1rrr@pe1rrr.nld.euro wrote:
> R:200429/1020z @:I0OJJ.ITA.EU $:8702_PE1RRR
> R:200429/1017Z @:GB7CIP.#32.GBR.EURO #:54090 [Caterham Surrey GBR]
> R:200429/1016Z 8702@PE1RRR.NLD.EURO LinBPQ6.0.20
>
>
> Hi folks
>
> While a build of the sources on 64bit linux WILL work, will RUN, it will get a lot of things very wrong and cause serious data
> integrity issues. You MUST compile the sources with 32bit libraries, here are my findings for doing that on a fresh Debian 10 6
> 4bit system. A way to see a 64bit build failing spectacularly is by running 'nrr' from that host to any neighbor and watch the
> fireworks occur in the traffic monitor as a netrom death spiral occurs (but still doesn't crash!).
while it is superfluous to say that almost the whole
packet-radio packages are created and run on 32-bit
platforms there are other incompatibility remained
nowadays in linbpq program.
> Here's the procedure I created below for working with the CommonSources.zip:
About the compiling: the results here remain the following,
namely since years I get 'Segmentation fault' every time.
----------
bash-4.3# rc.linbpq
G8BPQ AX25 Packet Switch System Version 6.0.20.1 April 2020
Copyright © 2001-2020 John Wiseman G8BPQ
Current Directory is /linbpq
Configuration file Preprocessor.
Using Configuration file /linbpq/bpq32.cfg
Conversion (probably) successful
PORTS 0x81b5da0 LINKS 0x81b95f0 DESTS 0x81bdf60 ROUTES 0x81c5940 L4
0x81c6570 BUFFERS 0x81cdb18
Initialising Port 01 AXIP
Initialising Port 02 Telnet Server
Initialising Port 03 ASYNC /dev/ttyp1 Chan A
Initialising Port 04 Loopback
IP Using eth0
Successfully connected to TAP interface LinBPQTAP
TAP brought up
TAP MTU set to 256
Route to 44/8 added via LinBPQTAP
Net44 Tunnel opened on PCAP device
IP Support Enabled
Starting Mail
Config File is /linbpq/linmail.cfg
Config Processed
Config File Line -1218084247 - (null)
/usr/local/bin/rc.linbpq: line 13: 4318 Segmentation fault ./linbpq
bash-4.3#
-------------
While the released compile of 'linbpq' is stable (at least
without stressing the system), it remains to be handicapped
on collect the 'encap' address; the *wrong* results obtained
here, follows:
<SNIP>
----
ENCAPMAC 00:00:00:00:00:00
134.209.164.184/32 134.209.164.184 E 0 0
139.99.125.191/32 139.99.125.191 E 0 0
141.98.80.204/32 141.98.80.204 E 0 0
142.93.183.128/32 142.93.183.128 E 0 0
153.178.140.223/32 153.178.140.223 E 0 0
158.69.251.161/32 158.69.251.161 E 0 0
159.65.80.142/32 159.65.80.142 E 0 0
162.243.138.54/32 162.243.138.54 E 0 0
162.243.139.246/32 162.243.139.246 E 0 0
162.243.143.64/32 162.243.143.64 E 0 0
164.68.112.178/32 164.68.112.178 E 0 0
165.22.187.76/32 165.22.187.76 E 0 0
167.99.162.154/32 167.99.162.154 E 0 0
....
....
<SNIP>
No way to be understood by the *good*
G8BPQ author, but that it's all :)
--
73 and ciao, gustavo i0ojj/ir0aab/ir0eq
SICD project Rome Italy
Quidquid latine dictum sit, altum videtur
Read previous mail | Read next mail
| |
