| |
G6KUI > BPQ32 23.02.12 04:33l 46 Lines 1605 Bytes #999 (0) @ WW
BID : 34891_G6KUI
Read: DK3UZ GUEST
Subj: Re: CP SYSOP: Link Win/BPQ32 >< Lin/FPAC
Path: DB0FHN<DB0MRW<DB0ERF<IZ3LSV<IK2XDE<DB0RES<DK0WUE<7M3TJZ<ZL2BAU<GB7YKS<
GB7SYP<GB7DBY<GB7DBY
Sent: 120223/0143z @:GB7DBY.#23.GBR.EU NPF2.54c [G6KUI PMS Alvaston Derby]
Misko YT7MPB was asking about connecting BPQ32.
You don't need seperate network cards to use AXUDP and BPQETHER.
I connect 3 machines using BPQETHER and one of them also connects via
AXUDP via the internet using a single network card on that machine..
BPQETHER also can be used to connect Windows or DOS with Linux.
73, Pete G6KUI
}
} From: YT7MPB@GB7DBY.#23.GBR.EU
} To : G6KUI@
}
}
} Original to SYSOP@WW
}
} Path: !GB7SYP!GB7YKS!VE3UIL!YT7MPB!
}
} From: YT7MPB@YT7MPB.#NS.SRB.EU
} To : SYSOP@WW
}
} Hi all,
}
} I have three BPQ32 machines in the home LAN and they talk each other by
} using bpqether ports. One machine has two network cards and other two have
} one card each, so the box with two cards interconnect all of them in a chain.
} When everything is up, all three nodes see each other, netrom works too, etc.
}
} Al three comps are dual-boot (with either Debian or Ubuntu). Now I want to
} experiment with connecting BPQ32 nodes to FPAC nodes. It seems that FPAC
} needs axudp ports to see the rest of the world, but if I replace bpqether
} with axip at BPQ32 comps, they stop talking each other (all three BPQ32
} nodes). On the other side, I do not know if it is possible to use bpqether
} approach in FPAC (in a way it works in Linux Node, I mean to use bpq0, bpq1,
} etc. instead of ax0, ax1, rose0, rose1, etc.) In fact, some time ago I
} managed to interconnect a BPQ32 machine with a Linux Node machine, by using
} only bpqether mode at Windows side, and bpq module at Linux side. Any idea?
}
} Misko
Message sent with NPFPMS V2.54c
Read previous mail | Read next mail
| |
