| |
GM3YEW > BPQ 01.09.02 14:51l 59 Lines 1808 Bytes #999 (0) @ EU
BID : 613_GM3YEW
Read: DB0FHN GUEST
Subj: Help AGW, BPQ32 & Sally32
Path: DB0FHN<DB0ZWI<DB0HOT<OK0PKL<OK0PPL<RZ6HXA<IK1ZNW<GB7CRV<GB7FUR<GB7IOM<
GB7SAN<GB7EDN<GB7YEW<GB7YEW
Sent: 020829/1031z @:GB7YEW.#79.GBR.EU $:613_GM3YEW Sally 3.1.080
CC message
From: GM3YEW@GB7YEW.#79.GBR.EU
Hi All
I can run this Win98se computer with Sally3.2 using either BPQ32 or AGWPE.
If I choose BPQ, I hardwire it to an MFJ TNC. However if I choose AGWPE, I
hardwire the port to a Baycom board (which I have to say works well - see
below).
If I use BPQ32, the unproto system works correctly ie if Sally send an
unproto request for list update, the BBS releases that information (and the
Sally list gets updated).
However, if I change the Sally configuration to use AGWPE, the above
sequence doesn't work.
If I choose to use AGWPE with it's own terminal, and I type a CR without
being connected, I send an unproto request to the BBS and I then see the
info coming back from the BBS.
How do I configure either AGWPE or Sally3.2 to do this.
What AGWPE programmes do you load before Sally3.2
Any general help appreciated.
* \
(\
(#\ 73 de Dave, GM3YEW (GM0PRG)
(##\- - - o/~~~~~ ~~ ~~~ ~~~~ ~~~ ~~~ ~~
(###\ / SysOp GB7YEW
(##.#\ /
/\(####\ / Email DAVE.E.MORRIS@BTINTERNET.COM
/\(\ \##.#\/
/\/(/\ \#.#.\ Email GM3YEW@THERSGB.NET
/\/\(\/\ \##\
/\/\/(/\/\ .#.\
/\/\/\(\/\/\
/\/\/\/(/\/\/\
IMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM;
: ! Just look at my shoes.:
: # I can tie a bow as :
: \/ \/ well as anyone :
: / \./ \ I know. :
: / \ PM 1429 (S.C.) :
HMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM<
(Mail is ALWAYS acknowledged - if you don't get a reply, please re-send)
/ack
/he hex
Timed Thursday 29 August 2002 10:29 gmt
BBS GM3YEW@GB7YEW.#79.GBR.EU
Read previous mail | Read next mail
| |
