| |
M0CRT > BPQ 28.09.01 15:51l 24 Lines 1207 Bytes #999 (0) @ WW
BID : 15192-GB7NRY
Read: DB1RAS GUEST DL3XAK
Subj: BPQ & IPGATE HELP
Path: DB0AAB<DB0PV<DB0MRW<DB0WUE<HA3PG<WB0TAX<ON0AR<ON1CED<ON0CK<GB7SXE<
GB7CIP<GB7COV<GB7MAX<GB7DAD<GB7MAM<GB7MRU<GB7NRY
Sent: 010927/1520Z @:GB7NRY.#19.GBR.EU #:15192 [Halifax] #:211800 $:15192-GB7NR
From: M0CRT@GB7NRY.#19.GBR.EU
To : BPQ@WW
Hi all
I need a little help please! I run JNOS, BPQ and IPGATE under Desqview.
Everything connects together super and runs fine...EXPECT for my Tiny 2 TNC
and TCP/IP Packets from JNOS through the IPGATE and out to 2m.
When I issue a telnet connect from JNOS I can see IPGATE forward the packet
out to the correct port on 2m and transmits...great. When my HUB responds
though my TNC keys up again WHILE I AM RECIEVING the packet. and again and again
It is as if the TNC has suddenly been placed in FULLDUP mode!
Then the TNC goes mad and transmits EVERY second the same packet! :-(
My route out to the TCP/IP port on 2m in IPGATE is set to VC mode rather than
Datagram mode. All the routing is fine...IPGATE can ping JNOS and my TCPIP
remote hub no probs.
Could this be a JNOS or a BPQCFG.TXT in the PORTS section problem?
It is a if IPGATE wants to ACKNOWLEDGE EVERY recieved packet rather than wait
for the end of the transmision. AX25 connects through this port are OK.
Any ideas????? I am running BPQ 4.09c and IPGATE that came with it. Is there
a newer version?
Thanks all!
PS JNOS is connected to IPGATE / BPQ via the ATTACH BPQ option in JNOS.
Nigel
Read previous mail | Read next mail
| |
