| |
J69DS > BPQ 26.08.01 14:49l 30 Lines 774 Bytes #999 (0) @ WW
BID : 440045J69DS
Read: GUEST
Subj: two ports on bpq- how?
Path: DB0AAB<DB0ZKA<DB0KFB<DB0CZ<DB0GE<LX0PAC<LX0HST<HA3PG<WB0TAX<VE2RNT<
VE2WXK<J69DS
Sent: 010826/1231Z @:J69DS.SLU.CAR.NOAM #:42478 [Paix Bouche] $:440045J69DS
From: J69DS@J69DS.SLU.CAR.NOAM
To : BPQ@WW
Dear Om,
I run a bbs in conjunction with a bpq node (single port).
I have two tnc's and thus intended to make it a two port system.
When I add the second port in bpq, bpq works ok on the first port but the
second port is deaf. The tnc in normal mode and a regular terminal program
works fine.
I would like to know if somebodey knows what is causing it to do this and
how to resolve the problem.
My setup here on the bpq-fbb pc:
pentium 90, 24 mb ram
mouse is a ps2
keyboard is 5 pin din
tnc 1 is on com1 (145.01) MFJ 1270C
tnc 2 is on com2 (145.5) MFJ 1276T this one goes deaf...
Ethernet card installed
windows 98 Se
Any assistance will be appreciated
Thank you,
Frans van Santbrink (Jr), J69DS
Sysop J69DS.SLU.CAR.NOAM
Read previous mail | Read next mail
| |
