| |
VK5AH > BPQ 13.01.01 17:20l 71 Lines 2400 Bytes #999 (0) @ WW
BID : 7431_VK5AH
Read: GUEST SQ9DHS
Subj: Re: Digipeating UI frames
Path: DB0AAB<DB0RGB<DB0MRW<DB0ERF<DB0FBB<DB0GOS<DB0PKE<DB0OVN<PI8JOP<IK1ZNW<
HA3PG<WB0TAX<VK3BBS<VK4ATD<VK4DGQ<VK4CXX<VK4TX<VK2YDN<VK2PYU<VK2TV<
VK5HB<VK5SPG<VK5TTY<VK5TTY
Sent: 010103/2324L @:VK5TTY.#ADL.#SA.AUS.OC $:7431_VK5AH Sally 3.1.066
Message from: VK5AH@VK5TTY Sally 3.1.066 PMS
Well I cant help with the FBB and unproto path.. but heres some info to
answer a simple question.. I dont want to get into the FLEXNET debate
again.. The question was asked about BPQ.. You dont have to run UIViev just
to have a digi but of course if you want APRS thats different.
This is applicable for BPQ 4.08a onwards
IN the Ports section check the following out..
DIGIFLAG=1 ; Digi 1=ALL Frames, 0=No Digi, 255=UI Frames only
DIGIPORT=0 ; Digi on same port as RXed
Now with BPQ 4.09c and also BPQ32 I have found it has alias settings for
Digis in the ports section..
PORTALIAS=RELAY ; Additional callsign/alias for level 2 connects
PORTALIAS2=WIDE ; to the node for this port Should NOT be the same
; as BBSCALL
Quoting a previous message from G0BKN@GB7BED
}
} Hi all and best wishes for 2001.
} Thank you for reading this plea for help.
} I am trying to set up a remote access node for this BBS but can't find out
} how to get FBB to send 'mail' and 'fbb' unproto broadcasts via the node/
} digipeater.
} I'm using DOSFBB v7.00g25 and BPQ 4.08.
} I have read and re-read the docs and I've tried countless combinations in
} INITTNC1.SYS but I can't seem to get the unprotos to be digipeated by the
} node. I'm sure it's possible but the docs don't give an explicit example
} of the syntax.
} I've got everything else working (FBBSYNC requests from a remote station
} get to the BBS OK and it responds, normal data is all digipeated perfectly
} both ways, etc) but I just can't get this last bit to go.
} I've got great support from Paula with the PZTNode software but I still
} need to get the BBS to do the above.
} How do I set up FBB/BPQ to send 'mail' and 'fbb' unproto broadcasts via a
} digipeater?
} Thanks in anticipation of your help.
}
} Kind regards & best 73 de Ian, G0BKN @ GB7BED
}
} e-mail: g0bkn@bedfordshire-amateur-radio.net
}
} Message timed: 20:17 on 02 Jan 2001
} Message sent using WinPack V6.51
}
Happy the bride who..................gets all the presents
73 Cheerio from Tony.
Message timed Wednesday 03 January 2001 23:23 local
AX25 VK5AH@VK5TTY.#ADL.#SA.AUS.OC
Email wavetel@iname.com
Tony QRX ON VK5RHO 29.620/147.675 10FM QTH PF95HC
ÕÍÍÍÍÍÍÍÍÍÍÍÍ͸
À¶¶¶¶¶¶¶¶¶¶¶¶¶Ù
³³³³³³³³³³³³³
Read previous mail | Read next mail
| |
