DB0FHN

2E1CAE > BPQ      03.02.96 11:18l 29 Lines 1160 Bytes #-11233 (0) @ EU
BID : 815_2E1CAE
Read: DL8MAS DH9MEC DG0EL GUEST
Subj: NETROM LINK via LPT port?
Path: DB0AAB<DB0PV<DB0MAK<DB0BOX<DB0FP<DB0SRS<DB0MW<DB0AIS<DB0NDK<DB0ACH<
      ON4RAT<ON5VL<ON4AIC<ON1AEO<ON6AR<ON4AWP<ON4KTK<GB7SXE<GB7YUH<GB7WIG<
      GB7ESX<GB7NNA<GB7EIP<GB7IOE<GB7OIP<GB7ZPU<GB7DAA<LWBBBS<GB7COV<GB7MAX<
      GB7SAM<GB7OAR<GB7LEN<2E1CAE
Sent: 960202/2343Z @:2E1CAE.GB7LEN.#16.GBR.EU [Runcorn] #:815 Z:WA7-2DT FBB5.15
From: 2E1CAE@2E1CAE.GB7LEN.#16.GBR.EU
To  : BPQ@EU

Hi All,

 Thanks for reading. I am running BPQ 4.08a and have got 2 ports, using
COM1 and COM2.  I only have 2 com ports, but I would like to be able to
run another copy of BPQ on another machine, and link them both with a
Parallel lead, as the only free port on this main packet machine is LPT1.  
Is there a way I can use a 'Back end' type netrom link via Parallel LPT
ports, just like you can with a standard Serial ports?

 Ok, I would really appreciate any info on this, as I have an XT here that
I could put BPQ on to and do something with. 73, Thanks for your time..


                     ' ÚÄ¿
        ÍÍÍÍ»  ÉÍÍÍ»   ÀÄ¿    de Chris! ³ Using FBB 5.15 + 
           ÄÎÄ    Ĺ   ÀÄÙ   ÚÄÄÄÄÄÄÄÄÄÄÊÄÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» BPQ
            º  ÈÍÍͼ  ÉÄÄÄÄÄļ SysOp @ Network Node RUNC ÀÄÄÄÄÄ»
       ÉÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ NTS:- 2e1cae @ 2e1cae.gb7len.#16.gbr.eu³
       ³Amprnet:- 2e1cae @ g6crv.ampr.org ³ QTH:- IO83pi : SJ58³
       ÈÍÍÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄoOoÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÍͼ
                           -= NWPUG Member! =-

... Bad spelers of the wurld unit.
- "TagLines" by Jon Richardson G7PFT


Read previous mail | Read next mail