| |
2E1CAE > BPQ 29.01.96 03:16l 31 Lines 1185 Bytes #-11238 (0) @ EU
BID : 687_2E1CAE
Read: DH9MEC DG0EL GUEST
Subj: Timer Overruns? HELP!!
Path: DB0AAB<DB0PV<DB0MAK<DB0SON<DB0SIF<DB0AIS<DB0NDK<DB0ACH<ON4RAT<ON7RC<
ON4AWP<ON4KTK<GB7SXE<GB7YUH<GB7WIG<GB7ESX<GB7NNA<GB7EIP<GB7IOE<GB7OIP<
GB7ZPU<GB7BED<GB7BEN<GB7AVM<GB7WAR<GB7COV<GB7MAX<GB7SAM<GB7OAR<GB7LEN<
2E1CAE
Sent: 960127/1714Z @:2E1CAE.GB7LEN.#16.GBR.EU [Runcorn] #:687 Z:WA7-2DT FBB5.15
From: 2E1CAE@2E1CAE.GB7LEN.#16.GBR.EU
To : BPQ@EU
Hi, and thanks for reading this.
I am running BPQ v4.08a and FBB 5.51. When I connect to the switch, and issue
a S S it says I have had 100+ timer overruns, even after it only being on for
a day or so, it will still get 100 + timer over runs?
I run a HP Vectra 286 with 2 Baycom boards (dual port) using the AX25EXT
baycom driver. Also sometimes my station will start to TX jibbrish, and
everything seems to really slow? almost as if I had just put an XT board in,
but slower than that even!
Any ideas on what I can do would be great! Or is it that the 286 is too slow?
73 - Thanks again...
' ÚÄ¿
ÍÍÍÍ» ÉÍÍÍ» ÀÄ¿ de Chris! ³ Using FBB 5.15 +
ÄÎÄ Ä¹ ÀÄÙ ÚÄÄÄÄÄÄÄÄÄÄÊÄÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» BPQ
º ÈÍÍͼ ÉÄÄÄÄÄļ SysOp @ Network Node RUNC ÀÄÄÄÄÄ»
ÉÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ NTS:- 2e1cae @ 2e1cae.gb7len.#16.gbr.eu³
³Amprnet:- 2e1cae @ g6crv.ampr.org ³ QTH:- IO83pi : SJ58³
ÈÍÍÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄoOoÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÍͼ
-= NWPUG Member! =-
... A Hammer: Irishman's screwdriver
- "TagLines" by Jon Richardson G7PFT
Read previous mail | Read next mail
| |
