| |
G8ECJ > BPQ 03.04.00 23:30l 60 Lines 2677 Bytes #-9687 (0) @ WW
BID : CJEGSFPE1DNN
Read: GUEST
Subj: Re: BAYCOM/BPQ DRIVER WITH CWID
Path: DB0AAB<DB0PV<OE2XOM<OE5XBL<DB0RGB<DB0MRW<DB0ERF<DB0FBB<DB0GOS<DB0PKE<
DB0SM<PI8DAZ<PI8APD<PE1DNN
Sent: 000403/1841Z @:PE1DNN.PI8APD.#GLD.NLD.EU #:22344 [Apeldoorn] $:CJEGSFPE1D
From: G8ECJ@PE1DNN.PI8APD.#GLD.NLD.EU
To : BPQ@WW
T:From: g8ecj@gb7tvg.#42.gbr.eu
T:Newsgroups: ampr.org.ww.bpq
T:Message-Id: <329803@gb7ipd.ampr.org>
NNTP-Posting-Host: os.pe1dnn.ampr.org
X-BID: 7765G8ECJ
X-BBS-From: G8ECJ@GB7TVG.#42.GBR.EU
X-BBS-To: BPQ@WW
X-BBS-Path: PE1DNN.PI8APD.#GLD.NLD.EU!PI8APD.#GLD.NLD.EU!PI8DAZ.#TWE.NLD.EU!DB0PKE.#NRW.DEU.EU!DB0GOS.#NRW.DEU.EU!DB0FBB.#NRW.DEU.EU!DB0ERF.#THR.DEU.EU!DB0MRW.#BAY.DEU.EU!DB0PV.#BAY.DEU.EU!DB0ISW.#BAY.DEU.EU!OE7XBB.#OE7.AUT.EU!IN3TRX.ITAA.ITA.EU!IN3TTI.ITAA.ITA.EU!IW2KTL.#BG.ILOM.ITA.EU!IW3HHD.IVEN.ITA.EU!IW3EFI.IVEN.ITA.EU!IV3AVQ.IFVG.ITA.EU!IV3LAV.IFVG.ITA.EU!S50MBL.SVN.EU!S50BOX.SVN.EU!9A0BBS.HRV.EU!9A0YRB.HRV.EU!HI8GN.#SDQ.DOM.CAR.NA!WU3V.#LFT.LA.USA.NA!GB7MBB.#16.GBR.EU!GB7CRV.#16.GBR.EU!GB7FYL.#16.GBR.EU!GB7BOB.#16.GBR.EU!GB7OAR.#16.GBR.EU!GB7SAM.#28.GBR.EU!GB7MAX.#28.GBR.EU!GB7PZT.#24.GBR.EU!GB7GLO.#46.GBR.EU!GB7LGS.#46.GBR.EU!GB7LGS.#46.GBR.EU!GB7DID.#49.GBR.EU!GB7CIP.#32.GBR.EU!GB7WSX.#32.GBR.EU!GB7NSY.#32.GBR.EU!GB7DEO.#32.GBR.EU!GB7TVG.#42.GBR.EU!
g0ifi wrote:
> Hi all,
>
> For those running the G8BPQ node with a baycom modem under DOS who want to
> comply with the legal requirement for a morse ident, Robin,G8ECJ has
> kindly modified his JNOS driver, AX25V4, to talk to BPQ.
>
> The driver (BPQAX25) can be found at
>
> http://www.gb7ipd.freeserve.co.uk/
>
> I have downloaded and briefly tested the driver, which works very well.
>
> After downloading and unzipping the driver, type BPQAX25 -? for command
> line options. If you are familiar with baycom drivers such as G7JJF's
> BPQAX25, the switches are the same, with -m as the switch for the CWID
> text, i.e. BPQAX25 -I4 -B3f8 -mg0ifi -w900
>
> Where I=IRQ, B=base address, -m=mycall, -w=CWID delay in seconds.
>
> Thanks to Robin for his work in modifying the driver, and apologies to him
> if any info in this bull isn't quite correct.
Hi Perry and all
Looks like you beat me to it - I was just sitting down to put out a
bulletin to say the new software was available :-))
My only correction is that the help screen is obtained with "bpqax25 ?" (no
minus sign) as per Jon Welch's original. The link on the gb7ipd web page
is for "bpqcwid.zip".
Hope it works OK - testing here has been very very limited as I don't
actually use BPQ anywhere!! Any feedback is appreciated.
--
73 de Robin. G8ECJ Hub manager gb7ipd
NTS: G8ECJ@GB7TVG.#42.GBR.EU AmprNet: g8ecj@gb7ipd.ampr.org
Internet: g8ecj@abmdata.demon.co.uk http://www.gb7ipd.freeserve.co.uk/
Shack: (+44) 1628 533311 Fax: (+44) 1628 850165
Club pages (g4xyw modem etc) at http://www.tvipug.freeserve.co.uk
Read previous mail | Read next mail
| |
