| |
PB0AFK > BPQ 13.02.99 02:30l 100 Lines 3177 Bytes #-10111 (0) @ EU
BID : 22874-PB0AFK
Read: DO3BS SP6VXT GUEST
Subj: CP PB0AFK: BPQUTILS.ZIP >README.TXT
Path: DB0AAB<DB0ZKA<DB0LX<DB0PRT<DB0AAA<DB0CZ<DB0GE<DB0IZ<DB0QS<DB0ACC<
DB0SM<PI8DAZ<PI8GCB<PI8WFL<PI8MBQ<PI8VNW
Sent: 990212/1511Z @:PI8VNW.#ZH2.NLD.EU #:22107 [HvHolland] FBB7.00g $:22874-PB
From: PB0AFK@PI8VNW.#ZH2.NLD.EU
To : BPQ@EU
Original from PB0AFK to BPQ_7P@EU
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ START OF ORIGINAL MESSAGE ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
* TstHost for Dos v1.43b - registered to PB0AFK *
* UTC diff: -1, Local time: 12-02-1999 14:33:52 *
* The world according to Garp and PB0AFK(Henk) *
* Msg:46093 Bid:22860-PB0AFK
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĶToplogo creator (c) 1997-1998 by PD0OLNºÄÄÄÄÄÄ
I did not invent this, just want to make it easy for others to use it.
I have been looking for this info for quite some time.
Many have never heard about this.
It is EASY!
Mine is working, so let me write down the details before I forget:
HOW IT WORKS:
You have a BBS and you need to access it from a second computer.
Easiest is to just put your handheld-with-rubber-duck on same freq as
your VHF radio, and you're talking.
If you use BPQ for software (driver), you can save yourself a TNC and a
radio. Because BPQ can do the same without a TNC or radio.
ALL YOU NEED IS A CABLE FROM ONE COMPORT TO THE OTHER AND TELL BPQ.
No other hardware needed, just the cable.
Of course, you need a COMport for this.
HOW TO CONFIGURE:
-You need BPQ in both computers.
-Connect a serial-cable (see below) to the COMport of each computer.
-You add a port to each BPQCFGG.TXT:
;
PORT
PORTNUM=
ID=Wire-link
TYPE=ASYNC <
PROTOCOL=NETROM <
IOADDR=2F8H this is COM2, use 3F8H for COM1.
INTLEVEL=3 this is COM2, use 4 for COM1.
SPEED=2400 select same speed for both BPQ's. (You can go much higher,
CHANNEL=A I dont want to give my XT a heart-attack).
FULLDUP=1
.........
ENDPORT
;
You add the above in both computers to be linked.
Ferry, YB3MI@YB3MI.#BKL.MI.IDN.OC tells me:
COMx COMx
====== =======
one computer other computer
------------ ---------------
Pin2 (RXD) <============ Pin3 (TXD)
Pin3 (TXD) ============> Pin2 (RXD)
Pin numbers are good if you use identical connector at both ends, either
DB-25 or DB-9.
If you use a DB-9 at one end, and a DB25 at the other, see table below.
I used the cable that is used with "LapLink-type data-transfer".
It worked.
25-pin to 25-pin 9-pin to 9-pin 9-pin to 25-pin
================ ============== ===============
Pin Pin Pin Pin Pin Pin
7 to 7 5 to 5 5 to 7 You dont need this
2 to 3 2 to 3 2 to 2 for packet.
3 to 2 3 to 2 3 to 3 This is what you get
4 to 5 7 to 8 7 to 5 when you buy the
5 to 4 8 to 7 8 to 4 cable in the store.
6 to 20 4 to 6 4 to 6
20uo 6 j@ba(
6 to 4 6 t 6 to 4 6 to 20
73,
Herman, N0JN/DU7 [ N0JN @ N0JN.CEB.PHL.OC ]
Using AA4RE bbs, the versatile soft. Good editor too!
I use it as my personal message-center. All automatic, even the backups.
Beats anything that I know!
[via HF CLOVER]
73 de Henk
Pc :486Dlc/40MHz Tnc:AEA Pk-88 Trx:Bosch Kf-161 Ant:Dualband 2m/70cm
Created by Mes_filter [v1.06c]
Read previous mail | Read next mail
| |
