| |
IK1IYU > BPQ 01.01.99 21:16l 36 Lines 1201 Bytes #-10159 (0) @ WW
BID : 12119-IK1IYU
Read: GUEST
Subj: Re: BPQ-Self installer
Path: DB0AAB<DB0MWS<DB0AHO<DB0KFB<DB0CZ<HB9EAS<HB9OS<HB9H<HB9OK<IW2FPO<
IK2QCA<IK1MAP<IK1IYU
Sent: 981231/1042Z @:IK1IYU.IPIE.ITA.EU #:65335 [Nizza M.to, AT] $:12119-IK1IYU
From: IK1IYU@IK1IYU.IPIE.ITA.EU
To : BPQ@WW
[¯¯¯ TST HOST 1.43b, UTC diff:-1, Local time: Thu Dec 31 11:13:48 1998 ®®®]
>SM3LKS WROTE:
>Just because you have a newer computer that can run newer software is
>no excuse to tell other people that the software they use is out of date.
In fact, I am running a remote multiport FlexNet node, based on a very
"new" 286 PC, 1 MB RAM, no hard-disk (only a boot floppy-disk) and a USCC
card with 1200 bps FSK, 9600 bps G3RUH, 4800 and 38400 bps Manchester
modems...
My home packet system is based on a 386DX40 computer, running FlexNet
node and TSTHOST PMS, easily linked to my local area network trough an
ethernet card, on which I can run ax25 and TCP/IP to the others Windows95
and Linux machines....
But all those words are useless: I had a BPQ node some years ago, than I
tried the FlexNet node and immediately converted my system....no regrets!
So, please, first give FlexNet a try, than speak...
73 & Season's Greetings de
Piero, IK1IYU
Packet: IK1IYU@IK1IYU.IPIE.ITA.EU
E-mail: pforno@iol.it
<< TSTHost v1.43b + PC/FlexNet v3.3g + S5PCC card on a 80386dx40 based PC >>
Read previous mail | Read next mail
| |
