| |
F5PBG > BPQ 16.07.98 03:42l 144 Lines 4229 Bytes #-10331 (0) @ WW
BID : 30914-F5PBG
Read: GUEST
Subj: Re: Autolist
Path: DB0AAB<DB0ZKA<DB0ABH<DB0SRS<DB0MW<DB0ERF<DB0ABZ<DK0MNL<RZ6HW<UA6HOV<
N8ZFM<VK7AX<WB0TAX<XE2EBC<PE0MAR<PI8VNW<GB7PMB<GB7ODM<GB7DHI<GB7OMN<
GB7BOB<GB7FYL<GB7FUR<GB7IOM<GB7BMR<GB7SAN<GB7AYR<GB7SDX<GB7BLE<GB7WRG<
GB7HUL<GB7EYM<GB7ZXN<GB7MSF<F6KBI<F5PBG<F5PBG
Sent: 980715/1134Z 30914@F5PBG.FBRE.FRA.EU [Brest] FBB7.00g $:30914-F5PBG
From: F5PBG@F5PBG.FBRE.FRA.EU
To : BPQ@WW
>
>GREETINGS FELLOW HAM FROM ASTORIA OREGON!
> I have a polite request. I have tried valiently to get BPQ408a
>running under Winpack 6.04. I am running a Paccom Tiny2 on com2 on a 386
>with windows 95. I don't give up easily and am hoping your ELMER streak
>will kick in to assist me. If you are successfully running bpq could
>you send me copies of your autoexec.bat. also bpqcfg.txt <yours not the
>original> and winpack.ini? pretty please!! I am reasonably well versed
>in the glossary involved i just am not doing something simple i'm sure.
>i have repeatedly read the documentation and tried to iniate the software
>several times , asked for help locally and gotten some but im still not
>doing some little thing correctly.
>
autoexec.bat - Extrait (at the end)
======================
CD C:\SALLY
kissinit -pcom2 -sreset
kissinit -pcom2 -spk232
LH NODE2BAY.EXE -I3 -B2F8 -i60 -dC:\SALLY\BAYDRV.VXD
CD C:\BPQ
BPQCFG
LH BPQCODE
CD C:\WINDOWS
WIN
======================
BPQCFG.TXT
==========
;
HOSTINTERRUPT=127 ; Sets the Interrupt used to access BPQ Host Mode. Will
EMS=0
DESQVIEW=0
NODECALL=F5PBG-2 ; NODE CALLSIGN
NODEALIAS=NODE29-2
BBSCALL=F5PBG-1 ; BBS CALLSIGN
BBSALIAS=F5PBG ; BBS ALIAS
;
IDMSG:
NODE29-2/F5PBG-2 ** F5PBG-1 BBS ** BREST / 29 ** OUEST FRANCE **
***
;
UNPROTO=PGBBS ; DEFAULT UNPROTO ADDR
INFOMSG:
F5PBG-1 * NODE29-2/F5PBG-2 Packet Switch, Brest, Ouest FRANCE. IN78RJ
Commands are basically the same as NET/ROM, but to connect to another
normal station (not another node), you must specify a port number before
the callsign. Use PORTS command to list available ports. The BBS command
connects you to the associated Mailbox.
***
CTEXT:
Welcome to F5PBG's Packet Switch in Brest dep 29 Ouest FRANCE.
Type ? for list of available commands.
***
FULL_CTEXT=0 ; SEND CTEXT ONLY TO L2 CONNECTEES TO ALIAS
; Network System Parameters
;
OBSINIT=5 ; INITIAL OBSOLESCENCE VALUE
OBSMIN=4 ; MINIMUM TO BROADCAST
NODESINTERVAL=0 ; 'NODES' INTERVAL IN MINS
IDINTERVAL=0 ; 'ID' BROADCAST INTERVAL (UK Regs require
; an AX25 ID every 15 mins)
;
BTINTERVAL=15 ; NO BEACONS
L3TIMETOLIVE=25 ; MAX L3 HOPS
L4RETRIES=3 ; LEVEL 4 RETRY COUNT
;
L4TIMEOUT=120 ; LEVEL 4 TIMEOUT
L4DELAY=10 ; LEVEL 4 DELAYED ACK TIMER
L4WINDOW=4 ; DEFAULT LEVEL 4 WINDOW
;
MAXLINKS=30 ; MAX LEVEL 2 LINKS (UP,DOWN AND INTERNODE)
MAXNODES=120 ; MAX NODES IN SYSTEM
MAXROUTES=35 ; MAX ADJACENT NODES
MAXCIRCUITS=64 ; NUMBER OF L4 CIRCUITS
MINQUAL=100 ; MINIMUM QUALITY TO ADD TO NODES TABLE
BBSQUAL=130 ; BBS Quality relative to NODE - used to
BUFFERS=255 ; PACKET BUFFERS - 255 MEANS ALLOCATE AS MANY
PACLEN=250 ; MAX PACKET SIZE
TRANSDELAY=1 ; TRANSPARENT MODE SEND DELAY - 1 SEC
T3=180 ; LINK VALIDATION TIMER (3 MINS)
IDLETIME=900 ; IDLE LINK SHUTDOWN TIMER (15 MINS)
;
BBS=1 ; INCLUDE BBS SUPPORT
NODE=1 ; INCLUDE SWITCH SUPPORT
;
HIDENODES=0 ; IF SET TO 1, NODES STARTING WITH # WILL
;
ENABLE_LINKED=N ; CONTROLS PROCESSING OF *** LINKED COMMAND
;
TNCPORT
COM=2
ENDPORT
;
;
2. Standard KISS TNC on primary ASYNC card. (COM1). To use the secondary
ASYNC card (COM2), change IOADDR to 2F8H, and the INTLEVEL to 3.
PORT
ID=UHF
TYPE=ASYNC
PROTOCOL=KISS
IOADDR=2F8H
INTLEVEL=3
SPEED=9600
CHANNEL=A
QUALITY=10
MAXFRAME=2
TXDELAY=500
SLOTTIME=100
PERSIST=64
FULLDUP=0
FRACK=7000
RESPTIME=2000
RETRIES=10
PACLEN=120
ENDPORT
***
APPLICATIONS=BBS,PMS,CONF,,
===============================
Of course, I have deleted some ";" lines. I use a pk232 in hostmode (with
KISSINIT.EXE soft wich i could send in 7plus if you want).
Nothing particular in WINPACK.INI.
73's of Ludovic.
Read previous mail | Read next mail
| |
