| |
G1MET > BPQ 21.06.98 03:19l 36 Lines 1359 Bytes #-10356 (0) @ EU
BID : 22105_GB7FYL
Read: GUEST
Subj: HELP - BPQ - OVERRUNS
Path: DB0AAB<DB0KFB<DB0CZ<DB0GE<DB0HOM<LX0PAC<F6KWP<F6KIF<F6KBK<F6PTT<
F6KBF<F6KFV<F5KCK<F8KAE<F5KAR<GB7SXE<GB7VRB<GB7HPH<GB7BNM<GB7GLO<
GB7PZT<GB7MAX<GB7OAR<GB7BOB<GB7FYL
Sent: 980619/0738Z @:GB7FYL.#16.GBR.EU #:22105 [Fylde Ax25 TCP/IP G] $:22105_GB
From: G1MET@GB7FYL.#16.GBR.EU
To : BPQ@EU
Hello and thanks for reading this message.
I am the Sysop of GB7FYL and I have encountered a probelm with BPQ. This has
been an onging probelm for sometime.
The Computer equipment in use is a Pentium 100MHZ with 32MB of Ram. It
operates the ery stables OS/2 operating system. BPQ is run using the O/S 2
Drivers for that software. There are a total of 8 ports run under BPQ.
The AX25 software now being run is FBB Version 7.00G and I also run a TCP/IP
facility which runs under UKNOS. This latter part has only just become
available but the timer overruns were present before this.
Even when the system boots up there are timer overruns. Within 1-2 days the
timer overruns are in the region of 200-3-- and the largest timer overrun that
has been produced is 7000!!!!
I have tried vbarious things with this without success so if anyone can assist
me on this it would be much appreciated.
Looking forward in anticipation of your response.
Thanks and 73 de Ron
Dr Ron Heywood Blackpool Lancs UK
Sysop GB7FYL COMBINED AX25 and TCP/IP BBS [44.131.100.176]
Member of NWPUG, RSGB, ARRL, Raynet, WAB & GB3FC Repeater Group
Amprnet : g1met@g1met.ampr.org
TCP/IP : 44.131.100.176
IP HUB : gb7fyl.ampr.org
AX25net : g1met@gb7fyl.#16.gbr.eu
EMAIL : ron.heywood@crocks.camelot.co.uk
Read previous mail | Read next mail
| |
