| |
G7TYA > BPQ 05.04.98 20:34l 26 Lines 1056 Bytes #-10433 (0) @ EU
BID : 145_G7TYA
Read: DG9AML GUEST
Subj: HELP WIN95+Ethernet BPQ
Path: DB0AAB<DB0KFB<DB0CZ<DB0GE<LX0PAC<ON5VL<ON4RAT<PI8DRS<PI8ZWL<PI8APD<
PI8GCB<PI8WFL<PI8VNW<GB7PMB<GB7WXM<GB7DEE<GB7OAR<GB7MAX<GB7COV<GB7COV<
GB7WAR<GB7GLO<GB7BNM<GB7IPN<GB7TJF<GB7IFI<G1PKM<G7TYA
Sent: 980405/1611Z @:G7TYA.GB7IFI.#45.GBR.EU #:145 [Woolavington, Bridg] FBB7.0
From: G7TYA@G7TYA.GB7IFI.#45.GBR.EU
To : BPQ@HF
Thankyou for reading this message,
At the moment I have 2 PCs which run BPQ and they can connect to each other
over my ethernet link. For this to happen I must be in a DOS environment and
be running the DOS drivers.
I would now like to run BPQ with WIN95 and maintain the BPQ ethernet link.
However, under WIN95 I already have IPX + Netbui running so that I can share
the PC resources.
I have been unable to get these two (BPQ + IPX) to run at the same time
under WIN95 unless I use two network cards at the same time, one dedicated to
each. However, this is very inefficient use of resources and I would like to
overcome the problem using just one network card.
If anyone could give me any advise, or point me in the right direction, or
to some one who may be able to help, I would greatly appreciate it.
Is there a BPQ network protocol driver for WIN95 out there ?????
Could this be the answer ?????
73's all the best
Thankyou in antisapation.... Andrew G7TYA@GB7IFI.#45.GBR.EU
Read previous mail | Read next mail
| |
