| |
G7LGW > BPQ 15.10.95 20:14l 28 Lines 1174 Bytes #-11345 (0) @ EU
BID : 26-G7LGW
Read: DF5CH DH9MEC DG0EL GUEST
Subj: BPQ+TSTHOST ? REQ
Path: DB0AAB<DB0PV<DB0MFG<OE7XCI<IW3AQL<IN3TUR<IK4NZD<IK4MGV<I4EUM<IK5CKL<
IR5PO<IK4OMO<GB7MSF<GB7BMX<GB7SAN<GB7BMR<GB7IOM<GB7FCI<GB7OAR<GB7SAM<
GB7MAX<GB7COV<GB7SOL<GB7WAR<GB7AVM<GB7BEN<GB7BED<GB7ZPU<LWBBBS<GB7TUT<
GB7DAA<GB7HSN<GB7UWS<G7LGW
Sent: 951013/2235z @:G7LGW.GB7UWS.#32.GBR.EU #:31 TSTH1.41 $:26-G7LGW
Hello,
Thanks for taking the time toread this message im trying to get TSTHOST to work
properly with BPQ. Im using both now while typing this message but there are a
few snags that i have hit at the moment. This our i load it all:
BPQCODE
DEDHOST 8 1 1 60 255 N
TSTHOST /D /I255
BPQNODES
Now the problem im having is that i dont seem to be able to see anything on the
monitor screen and this in turn stops my FBB header list from updating. If i
use PAC4 i can monitor with that so looks like im part of the way there but
just dont know our to switch the monitoring on once i have TSTH running.
Another problem im having with TSTHOST is i have mail forwarded from my local
BB to G7LGW-1 all works well with other software and the built in firmware of
the TNC but when th BB connects to me while running TSTH we exchange SID's i
send FF the BB sends FQ but no messages have been forwrded to my station and
when i check on the BB it tells me i have 1 message that i have read but not
killed even though i havent read it or had it forwarded on to me.I hope you can
help get this set up and that im not wasting my time.
Bye for now Pete G7LGW@GB7UWS
Read previous mail | Read next mail
| |
