| |
G7WFS > BPQ 14.05.97 22:21l 58 Lines 1858 Bytes #-10763 (0) @ EU
BID : 8968_G7WFS
Read: GUEST
Subj: Loosing BUFFERS ???
Path: DB0AAB<DB0KCP<DB0ZKA<DB0ABH<DB0SRS<DB0ZDF<DB0AIS<DB0NDK<DB0RWI<PI8ZAA<
PI8GCB<PI8WFL<PI8VNW<GB7PMB<GB7ODM<GB7DHI<GB7LEN<G7WFS
Sent: 970514/0009Z @:G7WFS.GB7LEN.#16.GBR.EU #:8968 [@:Runc.Node Runcorn]
From: G7WFS@G7WFS.GB7LEN.#16.GBR.EU
To : BPQ@EU
Hi All
I run G8BPQ node on my system here and am experiencing BUFFER loss. It will
start out at aprox 128 or so, then gradually drop and drop untill after a week
or so, the node has to be re-booted.
Here is a Stats list ( S S ) for my system just now.:
s s
RUNC:G7WFS}
Time active (mins) 5133
Timer Overruns 0
Buffers: Max/Cur/Min/Out 128 117 85 0
Known Nodes 42
L4 Connects Sent/Rxed 662 161
L4 Frames TX/RX/Resent/Reseq 3363 14738 81 46
L3 Frames Relayed 9568
u
RUNC:G7WFS} G8BPQ Network System V4.08a (118)
Host19(WFSPMS:G7WFS-1)
Uplink 4(G7VFJ-3) <--> Circuit(LENBBS:GB7LEN G7VFJ-3)
Uplink 2(G0JJL-15) <--> Circuit(DXMOSS:GB7MDX G0JJL-15)
Uplink 2(G4KHG) <--> Circuit(DXMOSS:GB7MDX G4KHG)
Uplink 4(2E1CYR) <--> Circuit(LENBBS:GB7LEN 2E1CYR)
Uplink 3(G4XOL) <--> Circuit(DXMOSS:GB7MDX G4XOL)
I use the following gear:
Comp: 386 SX40 with 2mb ram.
Tncs: 1) BayCom Serial modem with AX25EXT.COM Driver
2) RLC Card Port A
3) RLC Card Port B
4) Symek TNC2-H (In KISS. NOT MultiDrop)
5) Kantronics KPC-3 (In KISS. NOT MultiDrop)
6) BayCom Serial modem with AX25EXT.COM Driver
7) BayCom Serial modem at 2k4 baud with AX25EXT.COM Driver
I THINK it may be the baycoms causing the problem.. Could anyone confirm this
? I have tried using the BPQAX25.EXE driver and no joy.
Also, if I was to upgrade the computer to a 486, would this stop the problem
?
Cheers for now.. Any help atall much appreciated. 73 de Chris
*73* From Chris G7WFS (Runcorn)
TCPIP g7wfs.ampr.org [44.131.49.82]
NTS g7wfs@g7wfs.gb7len.#16.gbr.eu
NNNN
Read previous mail | Read next mail
| |
