| |
YT7MPB > BPQ 02.12.22 15:33l 34 Lines 1147 Bytes #999 (0) @ WW
BID : 56608_YT7MPB
Read: DJ6UX GUEST
Subj: Incoming connection tests
Path: DB0FHN<DB0RBS<DB0ERF<DK0WUE<PE1RRR<W9GM<N3HYM<YT7MPB
Sent: 221202/1308Z 56608@YT7MPB.#NSD.SRB.EU LinBPQ6.0.23
[Edited text]
Hello all,
I would like to perform some pactor & packet tests this way: My system
scans frequencies in order to make outgoing pactor & packet contacts
with forwarding partner stations. Each scanning attempt is initiated
after 5 minutes from the previous one. If the partner does not respond
and there is still some 3-4 minutes of 'free time' before the next fwd
attempt, my system scans 2 'parking' frequencies with different setup:
- 14.1038 (CF), 2000 Hz & 1000 Hz, 7 seconds (300bd packet available)
- 14.1104 (CF), 1500 Hz, 3 seconds (P1-P4 pactor & robust available)
That regime repeats itself until the next forwarding cycle is scheduled.
I would solicit incoming connections on either frequency (in respected
USB band modes), to see whether those 7 sec & 3 sec timings are suitable
enough to answer to incoming calls. (Call YU7BPQ or YT7MPB.) Tnx.
Pse note that my system is not 24/7 and it runs from the club station if
and when rigs are available. So there are days without this activity.
Today (Fri Dec 2) I'll be around till 1700 UTC (1800 EET local time.)
--
73 de Misko YT7MPB@YU7BPQ.#NSD.SRB.EU
Read previous mail | Read next mail
| |
