| |
G7WFS > BPQ 29.03.96 01:02l 46 Lines 1718 Bytes #-11178 (0) @ EU
BID : 1998_G7WFS
Read: DH9MEC DG0EL GUEST
Subj: BPQAX25 and IRQ 5+7..HELP!
Path: DB0AAB<DB0MWS<DB0CRL<DB0RBS<DB0GE<HB9EAS<HB9OS<HB9H<HB9OK<IW2FPO<
IK2QCA<I3NXU<IW4CQH<IW4CNQ<LINK<IK6HSM<G7WFS
Sent: 960325/2112Z @:G7WFS.GB7LEN.#16.GBR.EU [Runcorn] #:1998 Z:WA7-2DT FBB5.15
From: G7WFS@G7WFS.GB7LEN.#16.GBR.EU
To : BPQ@EU
Hi All,
I am trying very hard now to get 3 Baycom modems running on 3 com comports
using 3 individual cpies of BPQAX25 (or AX25EXT which ever..).
I can manage to get 2 running on COM1 and COM2 without any problems, but the
problems ome when I add COM3 and try putting a modem on that too.
I have COM1 set as 3F8f
COM2 " " 2F8h
COM3 " " 3E8h
Also I have COM1 on IRQ4
COM2 on IRQ3 and
COM3 on IRQ7.. I am using IRQ7 as
to not clash with the other Baycom modem. Basically, BPQ just doesnt see that
port atall! The BPQAX25 Driver set at IRQ7 with an address of 3E8 loads OK,
but just doesnt appear to the switch. It doesnt affect the other 2 ports.
If I remove COM1 and run my baycoms on COM2 and COM3 with COM2 on IRQ3 and
COM3 on IRQ4 (as default) the two work fine. I have tried having both COM1 and
COM3 on the same IRQ but it locks out all ports.....
The computer is an Hewlett Packard Vectra 286 at 12Mhz.
If you can help me atall, or have any information, I would be Very greatfull
to hear from you. Thanks for your time regardless, Best 73 de Chris in
Runcorn..
' ÚÄ¿
ÍÍÍÍ» ÉÍÍÍ» ÀÄ¿ de Chris! ³ Using FBB 5.15 +
ÄÎÄ Ä¹ ÀÄÙ ÚÄÄÄÄÄÄÄÄÄÄÊÄÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» BPQ
º ÈÍÍͼ ÉÄÄÄÄÄļ SysOp @ Network Node RUNC ÀÄÄÄÄÄ»
ÉÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ NTS:- g7wfs @ g7wfs.gb7len.#16.gbr.eu ³
³Amprnet:- g7wfs @ g6crv.ampr.org ³ QTH:- IO83pi : SJ58 ³
ÈÍÍÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄoOoÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÍͼ
Message Timed at 21:12: 9 on the 25/ 3/1996.
... Sudden prayers make God jump.
- "TagLines" by Jon Richardson G7PFT
Read previous mail | Read next mail
| |
