| |
PA1SDB > BEACON 01.08.03 23:59l 31 Lines 877 Bytes #999 (0) @ WW
BID : 4026-PA1SDB
Read: DL4DBX DB0FHN GUEST
Subj: 2 Aug.03 PA1SDB/B QRT / 14318,4 KHz
Path: DB0FHN<DB0RGB<DB0MRW<DB0SON<DB0SIF<DB0EA<DB0SM<DB0NDR<PI8AWT
Sent: 030801/2245Z @:PI8AWT.#GRO.NLD.EU #:13517 [Delfzijl, JO33KH] FBB7.00g25
From: PA1SDB@PI8AWT.#GRO.NLD.EU
To : BEACON@WW
[¯¯¯ TST HOST 1.43b, UTC diff:5, Local time: Fri Aug 01 22:38:12 2003 ®®®]
Hello,
PA1SDB/B goes QRT for now. The Beacon was running on 14.318,4 MHz for about
6 weeks. I learned much about running a Beacon and it was nice to read all
your reports, but there are some problems to take care of...
1) local interference on my receivers from the Beacon signal.
I have to figure out if it is possible to locate the Beacon
somewhere els.
2) I need a special licence for that.
3) 10mW and 55mW seems to be not powerfull enough to make
several propagation hops over the world. I think I
have to increase power a little.
73 and thank you for reports and comments.
Peter, PA1SDB
Packet: PA1SDB @ PI8AWT.#GRO.NLD.EU
E-mail: pa1sdb@amsat.org
URL : http://www.qsl.net/pa1sdb
QTH : Appingedam - The Netherlands
Read previous mail | Read next mail
| |
