OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
VK1DSN > VKVHF    10.03.03 16:36l 32 Lines 1032 Bytes #999 (0) @ WW
BID : 19673_VK1DSN
Read: DB0FHN GUEST
Subj: OH 4 1296 PWR
Path: DB0FHN<DB0ZWI<DB0HOT<DB0MRW<DB0RGB<OK0PPL<RZ6HXA<SP7MGD<WB0TAX<VK3AVE<
      VK1DSN
Sent: 030309/0237Z @:VK1DSN.ACT.AUS.OC #:19673 [Canberra,QF44lo] FBB7.00i
From: VK1DSN@VK1DSN.ACT.AUS.OC
To  : VKVHF@WW

Hello All,

There is a great debate raging in VK VHF circles at the moment on the
merits of TUBES verses SOLID STATE power amplifiers and the amount of
chuff for the buck on 1296.

It is much cheaper and easier to get a tube amp with about 150-200w
linear output going rather than mess with megabuck solid state
devices! Or is it?

We all would be very interested if you have designed or know of a
design for a solid state 1296 linear amp THAT WORKS well and can be
put together by the average VHF/UHF Ham.
It needs to use recent devices.
It needs to have full SSB 150-200w output with 10 watts of drive.
It needs to incorporate a receiver preamp.
The CCT board needs to be easily reproduced.
It needs to work first go. (dont want to destroy expensive divices trying)

How about it?
You will be a HERO!
And it shall be called the XXnXXX (callsign) Amplifier.
(Like DL6WU and G8BPQ etc etc - famous! thousands made!)

Best wishes
Rob
rquick@austarmetro.com.au
vk1zqr@vk1dsn.act.aus.oc


Read previous mail | Read next mail


 22.11.2026 00:03:50lGo back Go up