| |
ZL3AI > APRDIG 31.03.07 00:33l 117 Lines 2916 Bytes #999 (0) @ WW
BID : 9969-ZL3AI
Read: GUEST
Subj: [APRSSIG] Vol 33 #26, 1/1
Path: DB0FHN<DB0RGB<DB0AAB<DB0PV<DB0MRW<DB0ERF<DB0EAM<DB0SMG<DB0RES<IS0HHA<
CX2SA<ZL2BAU
Sent: 070330/2307Z @:ZL2BAU.#79.NZL.OC #:40362 [Waimate] $:9969-ZL3AI
From: ZL3AI@ZL2BAU.#79.NZL.OC
To : APRDIG@WW
Today's Topics:
1. I cannot resist (kb2scs_at_optonline.net)
2. D700 head cable (Marsh James)
3. Re: D700 head cable (Tapio Sokura)
4. RE: >>>TNC digi settings<<< (Robert Bruninga)
5. Re: D700 head cable (Marsh James)
6. Re: RE: >>>TNC digi settings<<< (Wes Johnston, AI4PX)
----------------------------------------------------------------------
Message: 1
Date: Sun, 25 Mar 2007 18:16:26 -0400
From: kb2scs_at_optonline.net
Subject: [aprssig] I cannot resist
Hi All
Since there is so little activity on the APRSsig of late, I cannot resist.
Powerpoles!
Let us hope we never witness the "Silence Of The Hams"
73 DE John KB2SCS
E-Mail: kb2scs_at_arrl.net
APRS-SCS http://www.tapr.org/~kb2scs
Web Page: http://www.qsl.net/kb2scs
------------------------------
Message: 2
Date: Sun, 25 Mar 2007 22:09:52 -0700 (PDT)
From: Marsh James <w9nje_at_sbcglobal.net>
Subject: [aprssig] D700 head cable
I lost the cable that connects the head to the body while moving the radio
to a new vehicle. Could someone please verify that it's wired straight thru
with both keys up and pins 1 & 6 are empty on the 6 pin connector?
Tnx. Jim. w9nje
Jim. w9nje_at_sbcglobal.net
------------------------------
Message: 3
Date: Mon, 26 Mar 2007 09:19:34 +0300
From: Tapio Sokura <oh2kku_at_iki.fi>
Subject: Re: [aprssig] D700 head cable
Marsh James wrote:
>I lost the cable that connects the head to the body while moving the
>radio to a new vehicle. Could someone please verify that it's wired
>straight thru with both keys up and pins 1 & 6 are empty on the 6 pin
>connector?
Yes. In a table form the wiring pins would look like this:
4 - 6
-----
- 1 (empty)
1 2
2 3
3 4
4 5
- 6 (empty)
Tapio
------------------------------
Message: 4
Date: Mon, 26 Mar 2007 09:03:56 -0400
From: "Robert Bruninga" <bruninga_at_usna.edu>
Subject: [aprssig] RE: >>>TNC digi settings<<<
Richard Sharp, KQ4KX has done some testing and concludes that the better
setting of TXD for his digipeaters is with a TXD of 180ms. His testing
with a TXD of 150ms at his digipeater measured about 9% of packets were not
decoded. At 170ms just over 2% weren't decoded. 180ms and above was 100%.
He was using a D700 for his test receiver.
For what it's worth.
Bob, WB4aPR
------------------------------
Message: 5
Date: Mon, 26 Mar 2007 06:40:45 -0700 (PDT)
From: Marsh James <w9nje_at_sbcglobal.net>
Subject: Re: [aprssig] D700 head cable
Thank You, Tapio.
Jim.
------------------------------
Message: 6
Date: Mon, 26 Mar 2007 08:41:25 -0500
From: "Wes Johnston, AI4PX" <wes_at_kd4rdb.com>
Subject: Re: [aprssig] RE: >>>TNC digi settings<<<
What's the vintage of the transmitter?
Wes
------------------------------
aprssig mailing list
aprssig_at_lists.tapr.org
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
End of aprssig Digest, Vol 33, Issue 26
Read previous mail | Read next mail
| |
