| |
ZL3AI > APRDIG 28.01.07 14:16l 291 Lines 8664 Bytes #999 (0) @ WW
BID : 9638-ZL3AI
Read: GUEST
Subj: [APRSSIG] Vol 31 #31, 3/4
Path: DB0FHN<DB0FOR<DB0SIF<DB0EA<DB0RES<F5GOV<F4BWT<IW2OAZ<ZL2BAU
Sent: 070128/0611Z @:ZL2BAU.#79.NZL.OC #:29608 [Waimate] $:9638-ZL3AI
From: ZL3AI@ZL2BAU.#79.NZL.OC
To : APRDIG@WW
Message: 15
Date: Fri, 26 Jan 2007 07:22:01 -0600
From: "R. Crockett" <rcrocket_at_win.org>
Subject: Re: [aprssig] Digi's Still Using Relay When Should Be Using Bob's
New Format
Richard,
The St. Louis area is refusing to come up to the current standards and
insists on using the old "Relay,Wide" format. The Boeing Club's Digi (WØMA)
is now the only one that is up to the new paradigm. I just took mine off
the air to move it to a better site.
73 de WØPC (Rick)
------------------------------
Message: 16
Date: Fri, 26 Jan 2007 07:35:00 -0600
From: "Bruce W. Martin" <aprs_at_almostanywhere.com>
Subject: Re: [aprssig] Digi's Still Using Relay When Should Be Using Bob's
New Format
There are plenty of APRS digipeaters that were setup with mostly commercial
gear and the owners haven't had a need to go to the site in years. Someday
something will break or they will finally take a vacation to the mountains
and they may reprogram their digis. I suspect that some digi owners have
moved on to other interests, and don't even know that the paradigm has
changed.
Bruce
--
Bruce W. Martin, KQ4TV
Trustee for NT4UX
Nashville Linux User Group - Amateur Radio- Special Interest Group
NLUG-AR-SIG
------------------------------
Message: 17
Date: Fri, 26 Jan 2007 23:43:25 +1100
From: "Andrew Rich" <vk4tec_at_tech-software.net>
Subject: [aprssig] PIC and telemetry question
How do you get a register that may be say 234 in value, to be sent as ASCII
as "2" "3" and "4"
Do you process by 100, 10 and 1's ?
Andrew Rich
Amateur radio callsign VK4TEC
email: vk4tec_at_tech-software.net
web: http://www.tech-software.net
Brisbane AUSTRALIA
------------------------------
Message: 18
Date: Fri, 26 Jan 2007 08:49:04 -0500
From: KA8VIT <ka8vit_at_ka8vit.com>
Subject: Re: [aprssig] PIC and telemetry question
Yep... unpacked BCD conversion.
Very easy.
73
Bill KA8VIT
Andrew Rich wrote:
>How do you get a register that may be say 234 in value, to be sent as
>ASCII as "2" "3" and "4"
>
>Do you process by 100, 10 and 1's ?
------------------------------
Message: 19
Date: Fri, 26 Jan 2007 08:53:27 -0500
From: "Robert Bruninga" <bruninga_at_usna.edu>
Subject: RE: [aprssig] PIC and telemetry question
>How do you get a register that may be say 234 in value, to be
>sent as ASCII as "2" "3" and "4"
>
>Do you process by 100, 10 and 1's ?
Yes, divide by 100, keep remainder, divide by 10, and keep remainder...
Bob
------------------------------
Message: 20
Date: Fri, 26 Jan 2007 14:34:51 +0000
From: richard.piper_at_media4god.org
Subject: Re: [aprssig] Digi's Still Using Relay When Should Be Using
Bob'sNewFormat
KC0RNP Digi at my house is set to New Format but I may be one of the only
ones that see a need to change!
Wonder why St. Louis will not change?
------------------------------
Message: 21
Date: Fri, 26 Jan 2007 10:17:09 -0500
From: John Hansen <john_at_coastalchip.com>
Subject: Re: [aprssig] PIC and telemetry question
And note that the hexadecimal value for "0" is 0x30, for "1" is 0x31,
etc. This makes the job easier than it would otherwise be.
John W2FS
------------------------------
Message: 22
Date: Fri, 26 Jan 2007 16:33:46 +0100
From: "Jan T. Pharo" <la2bba_at_jpharo.net>
Subject: Re: [aprssig] Local Repeater Displays on Mobiles
"Robert Bruninga" <bruninga_at_usna.edu>, Fri, 26 Jan 2007 03:00:29
-0500:
>Unless UIview can have a separate 0, no-hop path for these
>objects, then I recommend against using a client program to send
>these objects.
That could be a task for an add-on-writer; like in UI-Weather, which lets
the user enter another call and another path in UI-View's WX setup than in
UI-View's station setup.
--
73 de Jan, LA2BBA
Hvaler, Norway
------------------------------
Message: 23
Date: Fri, 26 Jan 2007 11:03:55 -0500
From: "Robert Bruninga" <bruninga_at_usna.edu>
Subject: [aprssig] Local Repeater objects on Uiview digipeaters
>>Unless UIview can have a separate 0, no-hop path for these
>>objects, then I recommend against using a client program to send
>>these objects.
>
>That could be a task for an add-on-writer; like in UI-Weather, which
>lets the user enter another call and another path in UI-View's WX
>setup than in UI-View's station setup.
Jan,
Hey, that's a great idea. It should be easy to be an add on to UIview,
since it is a simple stand-alone process and doesn't even really need
access to any other stuff to work except the TX side of the TNC or AXW.
Good thinking!
Bob, WB4APR
------------------------------
Message: 24
Date: Fri, 26 Jan 2007 10:36:05 -0600
From: Richard Montgomery <kb4ytm_at_gmail.com>
Subject: Re: [aprssig] Digi's Still Using Relay When Should Be Using Bob's
New Format
Hello Rick,
The Boeing Club digi may be setup to respond to the new paradigm settings,
but it has issues with its beacons.
It is always on the findu.com error page here (W0MA):
http://findu.com/cgi-bin/errors.cgi
It looks like the BTEXT is performing the location information for the digi
itself. And the LT 1 - 4 texts are incorrect, causing it to show up on
findu.com's error pages.
I emailed the club email address a couple of times about this but I never
heard any reply.
There is also a St Louis Area APRS Yahoo Group:
http://groups.yahoo.com/group/stlaprs/
Hope this helps,
Richard
KB4YTM
W0MA>BEACON,qAS,K0STL:!3845.82NS09022.15W#PHG5330/BEARS digi
W0MA>APN391,W9AIU-8*,qAo,N9PPJ:!3845.82NN09022.15W
W0MA>BEACON,qAS,K0STL:!3845.82NS09022.15W#PHG5330/BEARS digi
W0MA>BEACON,qAS,K0STL:!3845.82NS09022.15W#PHG5330/BEARS digi
W0MA>APN391,qAo,N0TZA:!3845.82NN09022.15W
W0MA>BEACON,qAO,N0PTN-1:!3845.82NS09022.15W#PHG5330/BEARS digi
W0MA>APN391,WIDE2-1,qAo,N0TZA:!3845.82NN09022.15W
W0MA>BEACON,qAO,N0PTN-1:T#626,136,137,068,039,115,00010011
W0MA>BEACON,qAS,K0STL:!3845.82NS09022.15W#PHG5330/BEARS digi
20070126104233 W0MA>APN391,qAo,N0TZA:!3845.82NN09022.15W
20070126105233 W0MA>APN391,WIDE2-2,qAS,K0STL:!3845.82NN09022.15W
20070126110233 W0MA>APN391,qAS,K0STL:!3845.82NN09022.15W
20070126111232 W0MA>APN391,qAS,K0STL:!3845.82NN09022.15W
20070126112234 W0MA>APN391,W9AIU-8*,qAo,N0TZA:!3845.82NN09022.15W
20070126114232 W0MA>APN391,qAo,N9PPJ:!3845.82NN09022.15W
20070126115232 W0MA>APN391,WIDE2-2,qAS,K0STL:!3845.82NN09022.15W
20070126120233 W0MA>APN391,qAS,K0STL:!3845.82NN09022.15W
20070126121232 W0MA>APN391,qAS,K0STL:!3845.82NN09022.15W
20070126122232 W0MA>APN391,WIDE2-1,qAS,K0STL:!3845.82NN09022.15W
20070126125232 W0MA>APN391,WIDE2-2,qAS,K0STL:!3845.82NN09022.15W
20070126130232 W0MA>APN391,qAS,K0STL:!3845.82NN09022.15W
20070126131232 W0MA>APN391,qAo,N9PPJ:!3845.82NN09022.15W
20070126132233 W0MA>APN391,W9AIU-8*,qAo,N9PPJ:!3845.82NN09022.15W
R. Crockett wrote:
>Richard,
>
>The St. Louis area is refusing to come up to the current standards and
>insists on using the old "Relay,Wide" format. The Boeing Club's Digi
>(WØMA) is now the only one that is up to the new paradigm. I just took
>mine off the air to move it to a better site.
>
>73 de WØPC (Rick)
>
>----- Original Message -----
------------------------------
Message: 25
Date: Fri, 26 Jan 2007 16:43:11 +0000
From: richard.piper_at_media4god.org
Subject: Re: [aprssig] Local Repeater objects on Uiview digipeaters
Any one know how to code & willing to write this add-on?
------------------------------
Message: 26
Date: Fri, 26 Jan 2007 18:18:29 +0100
From: "Jan T. Pharo" <la2bba_at_jpharo.net>
Subject: Re: [aprssig] Local Repeater objects on Uiview digipeaters
richard.piper_at_media4god.org, Fri, 26 Jan 2007 16:43:11 +0000:
>Any one know how to code & willing to write this add-on?
I'll send a copy of that part of the communication to the UI-View group.
--
73 de Jan, LA2BBA
Hvaler, Norway
------------------------------
Message: 27
Date: Fri, 26 Jan 2007 18:27:08 +0100
From: Kai Gunter Brandt <kai.brandt_at_hjemme.no>
Subject: Re: [aprssig] Local Repeater objects on Uiview digipeaters
richard.piper_at_media4god.org wrote:
>Any one know how to code & willing to write this add-on?
>
>Sent via BlackBerry from Cingular Wireless
My earthquake plugin is been executed from UI-Views scheduler and sending
objects via local aprsserver (have to enable in digi setup)
Works ok but someone probably can make a better plugin as this is a "hack"
that doesn't use ActiveX and only works if ui-view is run as a digipeater.
But you can alter what it should digi on so any alias should work so that
you dont digipeat other stations like WIDEn-N if you are not suposed to run
a digi.
The program then needs some parameters like: callsign, path and symbol
data.
LA3QMA
Kai Gunter
------------------------------
Read previous mail | Read next mail
| |
