| |
ZL3AI > APRDIG 25.10.06 09:05l 59 Lines 1708 Bytes #999 (0) @ WW
BID : 8863-ZL3AI
Read: GUEST
Subj: [APRSSIG] Vol 28 #5, 2/2
Path: DB0FHN<DB0MRW<DK0WUE<GB7FCR<ZL2BAU
Sent: 061025/0801Z @:ZL2BAU.#87.NZL.OC #:11138 [Waimate] $:8863-ZL3AI
From: ZL3AI@ZL2BAU.#87.NZL.OC
To : APRDIG@WW
Message: 8
Date: Thu, 5 Oct 2006 06:15:27 -0500
From: Jason Winningham <jdw_at_eng.uah.edu>
Subject: Re: [aprssig] low power 2 meter exciter needed
On Oct 4, 2006, at 11:38 PM, Tyson S. wrote:
>The Big Red Bee all ready makes an AFSK ready transmitter at 30 milliwatts.
it's 70cm, not 2m.
-Jason
kg4wsv
------------------------------
Message: 9
Date: Thu, 5 Oct 2006 11:31:51 -0500
From: "Michael Stone" <micstone_at_stoneslife.com>
Subject: [aprssig] APRS over TCP/IP Question
I am trying to figure out how to setup APRS so that it will transmit my
data over my TCP/IP connection. I have a cellular phone card installed in
my computer, and would like to send APRS data via TCP/IP instead of
installing another 2m radio in my truck. Is this possible? And if so, HOW?
73
Michael Stone - N5PDW
------------------------------
Message: 10
Date: Thu, 5 Oct 2006 11:48:53 -0500
From: "John Habbinga" <kc5zrq_at_gmail.com>
Subject: Re: [aprssig] APRS over TCP/IP Question
Sure. I've done it and I know people that do this all the time. Just use
your APRS client software and configure it to connect to an APRS server.
On 10/5/06, Michael Stone <micstone_at_stoneslife.com> wrote:
>
>I am trying to figure out how to setup APRS so that it will transmit my data
>over my TCP/IP connection. I have a cellular phone card installed in my
>computer, and would like to send APRS data via TCP/IP instead of installing
>another 2m radio in my truck. Is this possible? And if so, HOW?
------------------------------
aprssig mailing list
aprssig_at_lists.tapr.org
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
End of aprssig Digest, Vol 28, Issue 5
Read previous mail | Read next mail
| |
