| |
ZL3AI > APRDIG 19.09.06 22:13l 113 Lines 3342 Bytes #999 (0) @ WW
BID : D9GIS0HHA08N
Read: GUEST
Subj: [APRSSIG] Vol 27 #1, 1/1
Path: DB0FHN<DB0FOR<DB0MRW<DK0WUE<7M3TJZ<IW8PGT<IS0GRB<IK6IHL<IW2OAZ<IS0HHA
Sent: 060913/1822z @:IS0HHA.ISAR.ITA.EU [OpenBCM] OBcm1.06
From: ZL3AI @ IS0HHA.ISAR.ITA.EU (Tony)
To: APRDIG @ WW
X-Info: Sent with login password
R:060913/1751Z @:IS0HHA.ISAR.ITA.EU #:26542 [27514] FBB7.01.35 alpha
R:060902/2358z @:IW2OAZ.ILOM.ITA.EU $:8703-ZL3AI
R:060902/2257Z @:ZL2BAU.#87.NZL.OC #:1781 [Waimate] $:8703-ZL3AI
From: ZL3AI@ZL2BAU.#87.NZL.OC
To : APRDIG@WW
Today's Topics:
1. UI-View setup for messages (Andrew Rich)
2. RE: UI-View setup for messages (Cap Pennell)
3. Re: UI-View setup for messages (VE7GDH)
----------------------------------------------------------------------
Message: 1
Date: Fri, 1 Sep 2006 05:03:23 +1000
From: "Andrew Rich" <vk4tec_at_tech-software.net>
Subject: [aprssig] UI-View setup for messages
Gudday
One thing that is lacking in our area is a method of being able to message a
mobile from the internet.
I understand how to run the aprs server bit etc. and have had the igate
running before.
What I need to know is how to tell ui-view to gate messages to rf ?
Do I go into "Edit IGATE.INI" and then put for "Inet to RF"
VK* = RECIP
VK* = DEST
Cheers Andy
Andrew Rich
Amateur radio callsign VK4TEC
email: vk4tec_at_tech-software.net
web: http://www.tech-software.net
Brisbane AUSTRALIA
------------------------------
Message: 2
Date: Thu, 31 Aug 2006 12:22:01 -0700
From: "Cap Pennell" <cap_at_cruzio.com>
Subject: RE: [aprssig] UI-View setup for messages
No. In UI-View32, "Setup,APRS Server Setup,Gate local messages" should be
checked.
73, Cap KE6AFE
------------------------------
Message: 3
Date: Thu, 31 Aug 2006 12:40:28 -0700
From: "VE7GDH" <ve7gdh_at_rac.ca>
Subject: Re: [aprssig] UI-View setup for messages
Andy VK4TEC wrote...
>One thing that is lacking in our area is a method of being able to message
>a mobile from the internet.
An IGate near the mobile needs to be set up to gate messages to local
stations... edit IGATE.INI and set max digis to whatever is appropriate. In
populated areas (multiple IGates) setting it zero would be good. If there it
is several digi hops to the next IGate, consider setting it to one or two as
appropriate. If there isn't another IGate for 1000 km, you might end up
setting it for 7 digis, but that would be an extreme example. Most IGates
should probably be set to zero or one.
>I understand how to run the aprs server bit etc. and have had the igate
>running before.
>
>What I need to know is how to tell ui-view to gate messages to rf ?
As above, set max digis to an appropriate setting.
>Do I go into "Edit IGATE.INI" and then put for "Inet to RF"
>
>VK* = RECIP
>VK* = DEST
Be careful here. The above would gate ALL messages to ALL VK stations.
Whether or not that kills your local network depends on how many messages
are being sent to VK stations. My recommendation would be to NOT enter those
settings. Just gate traffic to local stations... i.e. stations heard direct
or via one or two digis as is appropriate for your local conditions.
You can watch what it is gating to an from RF by clicking on "show IGate
traffic".
As Cap pointed out, you also need to enable "gate local messages" in APRS
server setup.
73 es cul - Keith VE7GDH
--
"I may be lost, but I know exactly where I am!"
------------------------------
aprssig mailing list
aprssig_at_lists.tapr.org
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
End of aprssig Digest, Vol 27, Issue 1
Read previous mail | Read next mail
| |
