| |
SM0RWO > MAC 21.08.98 00:35l 18 Lines 732 Bytes #999 (0) @ EU
BID : 9110_SM0NUE
Read: DL2NGN DH1NSP GUEST DK3EL
Subj: Macs on Packet !
Path: DB0MW<DB0ERF<DB0GR<DB0BLO<DB0TEM<DB0HGW<OZ3BBS<SK7FK<SK7DO<SK7HR<
SK7GC<SK5AS<SK5BN<SK5UM<SK0MK<SK0QO<SM0NUE
Sent: 980820/1802Z @:SM0NUE.HNINGE.AB.SWE.EU #:9110 [Brandbergen] $:9110_SM0NUE
From: SM0RWO@SM0NUE.HNINGE.AB.SWE.EU
To : MAC@EU
Hi all,
I've seen numerous questions regarding how to connect a Mac to a TNC so
I thought I'd help those that asked about that.
I'm at present using a Classic, an LC and a Powerbook 160 connected to
various TNC's (the powerbook's great for dxpeditions).
Start by downloading ZTerm, ftp://ftp.funet.fi/pub/ham/mac, and have a
look at appendix A where you'll find an instruction on how to construct
a cable between the Mac and the TNC.
Connect that cable to either the modem or printer port, fire up ZTerm
and your'e on-line (switch on tnc and connect the cable to it of course) !
Hope this helps
73's from Per
ax.25: sm0rwo@sm0nue.hninge.ab.swe.eu
e-mail: flitt@mbox301.swipnet.se
Read previous mail | Read next mail
| |
