OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
PA3GJL > AMTOR    13.03.95 09:08l 15 Lines 679 Bytes #-11577 (0) @ EU
BID : 45483_PI8JOP
Read: DL1MFK DL1MGV GUEST
Subj: hc3.00 and amtor synchproblems
Path: DB0AAB<DB0PV<DB0WGS<DB0RGB<DB0ABH<DB0SRS<DB0FP<DB0ERF<DB0SHG<DB0HSK<
      DB0QS<DB0ACC<DB0AHA<DB0NDR<PI8AWT<PI8JYL<PI8WFL<PI8APD<PI8UTR<PI8ZAA<
      PI8JOP
Sent: 950307/2049 45483@PI8JOP.#LIM.NLD.EU


Hello amtorfreaks ! Is there anybody who has also synchronize problems when
running amtor with hamcom 3.00? I heard from a german amateur, that it was a
known problem that the FEC signal of hamcom users was difficult to read. I
myself have problems with the clockcorrection factordeterniation procedure, 
as documented in the doc. According to the doc, the clock should stay stable
at 0 when the correct correction has been determined at put in the hc.cfg
file. Well I did, but the figure at the left bottom of the screen keeps
changing as before.
Can anyone say someting to this problem ?
I am looking forward to any messages.
73! Marc, Hulsberg PA3GJL @ PI8JOP.#LIM.NLD.EU



Read previous mail | Read next mail


 22.11.2026 12:41:44lGo back Go up