OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
G4CUI  > AMTOR    21.06.97 21:29l 45 Lines 1389 Bytes #-10745 (0) @ WW
BID : 35015_NRYTCP
Read: DL2EEH DL1FCU DJ2LA DL3DC DH1PA GUEST
Subj: IC706 FSK
Path: DB0ZDF<DB0AIS<DB0NDK<DB0RWI<PI8ZAA<PI8HWB<PI8VAD<PI8VNW<GB7PMB<GB7WXM<
      GB7DEE<GB7LEN<GB7OAR<GB7SAM<GB7MAX<GB7COV<GB7COV<GB7AYI<GB7NOT<GB7MAM<
      GB7ADH<GB7MRU<GB7WRG<GB7SYP<GB7WRR<GB7NRY
Sent: 970620/2124Z @:GB7NRY.#19.GBR.EU #:12231 [Halifax] $:35015_NRYTCP
From: G4CUI@GB7NRY.#19.GBR.EU
To  : AMTOR@WW


Hi,
I use an IC 706 with direct FSK on TOR modes, and have noticed that
the power output seems to vary between mark and space frequencies.
When I look at the power meter it is varying as the two
frequencies are transmitted. I have investigated further
by shorting the pins of the FSK jack plug at the rear of the
rig, and find that on going from one freq to the other, the
power level momentarily drops and then resumes its original
level. However upon open circuiting the pins there is no
brief power glitch in going back to the original freq. So it
seems that although both mark and space power levels are
the same, going from one freq (f1) to the other (f2) causes a brief
reduction of power, and this only happens with f1 to f2,
not f2 back to f1. Anyone else noticed this?
73 Greg.

			     ,,,,,

			    ( @ @ )

 - - - - - - - - - - oOOo - - (_) - - oOOo - - - - - - - - - -

|  Greg Cook, G4CUI                                           |

|  QTH:        Sheffield, UK, 53.37 degs N, 1.55 degs W       |

|  Tel or SMS: +44 (0) 973 626195                             |

|  Email:      g.cook@sheffield.ac.uk                         |

|  Packet:     g4cui@gb7nry.#19.gbr.eu (nts)                  |

|  TCPIP:      g4cui.ampr.org. ip address [44.131.2.45]       |

 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -






Read previous mail | Read next mail


 21.11.2026 20:51:24lGo back Go up