| |
CX2SA > SATDIG 24.07.05 15:26l 273 Lines 12381 Bytes #999 (0) @ WW
BID : 14528_CX2SA
Read: GUEST
Subj: AMSAT-BB-digest V2004 #803 2/3
Path: DB0FHN<DB0RGB<DB0AAB<F6KFT<LX0PAC<DB0NDK<DB0MKA<DB0ACC<DB0GOS<DB0RES<
ON0AR<7M3TJZ<PY1AYH<CX2SA
Sent: 050724/1415Z @:CX2SA.LAV.URY.SA #:14528 [Minas] FBB7.00e $:14528_CX2SA
From: CX2SA@CX2SA.LAV.URY.SA
To : SATDIG@WW
Message: 2
Date: Sun, 24 Jul 2005 13:13:17 +1000
From: "William B Magnusson" <williamb@netc.net.au>
Subject: [amsat-bb] AMSAT conference server on Echolink
Hello everyone.
I'm not sure if this is the correct forum for this query.
For some months now the AMSAT conference server on Echolink seems to have
been permanently connected to something called *CANADA*. This looks to be
some sort of IRLP or other RF link to another server. The stations using the
*CANADA* link are mostly oblivious to any activity on the AMSAT server.
Traffic on the link is centred around tornado and other storm reports and
seems to involve a network of stations closely involved in monitoring
weather systems. Activity on the AMSAT server does not seem to interfere
with or cause any problem to the linked stations. Unfortunately the reverse
is not true. While the link is working it is not possible for any station to
activate the AMSAT server and gain access, however it's often the case that
a link station will be heard transmitting when a conference station
completes an
"over", thereby preventing any other AMSAT conference station from replying.
Does anyone on the BB know of any reason for this link to be attached to the
AMSAT server?
73, Bill...vk3jt
Milawa,
Australia
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
------------------------------
Message: 3
Date: Sun, 24 Jul 2005 11:18:56 +0700
From: "Thailand Amateur Radio Satellites Corporate"
<tamsat_gateway@hotmail.com>
Subject: [amsat-bb] U5MIR on ISS over Bangkok Thailand
Dear ALL
goto this web http://echolink.station.in.th/forums/showthread.php?t=517
or save target as
http://echolink.station.in.th/forums/attachment.php?attachmentid=314
for download voice mp3 of U5MIR on ISS over bangkok thailand.
Regards,
TAMSAT
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
------------------------------
Message: 4
Date: Sat, 23 Jul 2005 22:25:39 -0600
From: Freeman Pascal <pascal@pascal.org>
Subject: Re: [amsat-bb] LONG and long overdue report
Ooohhh ... this is all very very cool. The SDR stuff is something I
have always wanted to play with. I suppose I'll have to stop waiting
and do something about it. <grin>
- -Freeman, N5FPP
On Jul 23, 2005, at 7:45 PM, Robert McGwier wrote:
> Apologies to my colleagues and expect to see much more from all the
> participants in upcoming journals and meetings.
> *
>
> There has been work going on that has not been adequately described
> anywhere and I take the blame for that. I have been spending
> engineering money on your behalf. Let me summarize it for you and
> apologize for the length of this note. If I include technical
> details here, it would be much too long and articles for the
> journal will follow this short report. Frank Brickle, AB2KT, and I
> have been involved with Flex Radio doing the digital signal
> processing code for the SDR-1000 for almost 2 years. Frank and I
> are doing this as volunteers for Flex and I am doing it
> professionally for my employer who has myriad uses for this
> technology and software. Frank and I have no formal relationship
> with Flex and our work has been entirely voluntary. We have
> insisted that all work proceed under the GPL, but we did not have
> to work hard at this insistence since Gerald, K5SDR, is a clear
> believer. Please visit
>
> http://www.flex-radio.com
>
> and
>
> http://dttsp.sourceforge.net
>
> for full details and the code.
>
> When asked to join the Eagle design conference, I attended with the
> idea that I would give a few ideas, listen to a few ideas, get some
> ideas, and then go home and go back to sleep. I should know
> myself better by now. It became clear that the same old arguments
> would be presented stating we simply cannot live without Mode B.
> It was clear that we would have to give up significant territory in
> the spacecraft and power budget for anything that would interest me
> personally. I wanted to jump all over CC Rider, which is a 5650
> MHz uplink and 5850 MHz downlink transponder. This was another
> terrific Tom Clark (W3IWI) idea and it captured my interest.
>
> ftp://ftp.cnssys.com/pub/amsat/cc_amsat.pdf
>
> and
>
> ftp://ftp.cnssys.com/pub/amsat/cc-revisited.pdf
>
> It would give us our first satellite presence in these two bands
> and would provide us with some interesting technology and
> engineering and theoretical development issues to resolve. It
> would be a new educational prod to our users to learn and do
> something new. So I opened my mouth and said that I would be more
> than happy to "write" a software defined transponder for all of the
> normal "narrow band" transponders if and only if, CC Rider would
> be given 100% access to the power budget and always operational
> when it could be aimed at the earth. I would never consider
> supporting a RUDAK type mission where lots of work would be done
> and almost nothing ever done to use it. In fact, I claimed that
> all transponders could be, and likely should be, software defined
> radios. The spacecraft mechanical design and analysis shone at
> this meeting gave sufficient power budget to meet the design goal
> of 100% Mode B or Mode LS and 100% CC Rider simultaneously. We
> would have to constrain the CC Rider bandwidth to do all we wanted
> to do and allow small antennas on the ground but it would still be
> very interesting indeed.
>
> That landed me in hot water. The group put me in charge of the
> transponders period. This has begun to bear fruit. Frank and I
> have been building a working 48 Khz transponder for Mode B and
> Mode A. It is done using SDR-1000's and transverters and a Mini-
> ITX computer. THIS IS A PROTOTYPE. However, what can be done is
> pretty spectacular. Swapping between Mode's A and B is quite easy
> with this equipment. That said, this is not your father's Mode B
> and Mode A. We can have a three FM receivers and transmitters on
> one side of the beacon (which is in the center) and fully linear
> above the beacon. We implement Leila in DSP and even loud AMSAT
> lovers from southern Europe could not be louder than the beacon by
> more than 3 dB no matter how many megawatts EIRP they transmit.
> Even better, pileup participants will be shoved down to the noise
> floor where none of the emitters would be audible and good behavior
> would be strictly enforced since the sum of the people on the same
> frequency will be limited to 3 dB above the beacon!
>
> If we got tired of this configuration, we could turn it into
> several digital transponders or FILL IN THE BLANK, by simply
> changing the DSP configuration. Frank and I have made that very
> easy to do in our system. We will likely have to do some serious
> experimentation with processors to find the suitable one to carry
> the load and not need half the power budget but it is a great
> challenge and one I relish. What was it Tom and I used to say?
> "It's only software!" Indeed it is and the nicest thing is, most
> of the software already exists (for a change). This MODE B AND MODE
> A TRANSPONDER WILL BE DEMONSTRATED AT THE ANNUAL MEETING IN
> LOUISIANA. Once we decide on the politics and legalities of where
> to place the transmitter and receiver bands, we will announce what
> equipment to bring. Please bring your G3RUH PSK demodulator and
> decoder software to see the M blocks coming your way.
>
> Recently, Frank and I joined the Gnu Radio "family" and I own (and
> so does AMSAT) the Gnu Radio project's Universal Software Radio
> Peripheral (USRP).
>
> http://www.gnu.org/software/gnuradio/
>
> and
>
> http://www.ettus.com/
>
> John Stephensen, KD6OZH, has kindly donated two of his DCP-1's and
> we are building them up to use as well for our experiments. With
> his OFDM modem, we can even start transmitting the digital signals
> of interest to us in this transponder or utilize that structure in
> a modified way for the ground stations. These units
>
> http://www.arrl.org/tis/info/pdf/020910qex041.pdf
>
> These two units, USRP and DCP-1, are FPGA based engines. We are
> planning on running several design experiments on these units.
> Matt Ettus, N2JMI has given us a receiver for L band and will be
> doing the same for an S band transmitter. We can program the unit,
> using the same prototyping system that will run the Mode B
> transponder prototype, to do a few hundred KHz wide LS
> transponder. If we get the parts and can get some minor control
> going, it will be very easy to run a transponder on the USRP. THIS
> IS A PROTOTYPING EXPERIMENT. Again, we are going to have to
> carefully size our needs to have a possible power budget for the
> processing needed to put this transponder on the air as the USRP in
> its current form, takes 10 watts to do the job. For the initial CC
> Rider concept, we have a difficult task. We are proposing to use
> patch antennas with several small transmitters and preamps at the
> antenna and phasing these to be Nadir pointing. The USRP is
> uniquely qualified to enable these experiments. It has four
> receiver and four transmitter ports. We could do our phasing
> experiments using these ports. If this does not work out, and it
> is the riskiest part of the CC Rider concept, we can fall back to
> traditional gain antennas but it will limit the utility of this
> transponder to near-apogee and when nadir pointing. Tom Clark found
> an interesting part for 5 Ghz that looks promising. It is the
> Hittite 1 watt linear amplifier (HCM408LP3) and we have two
> evaluation modules to get a clear idea of the operational
> characteristics at differing power levels. This would be important
> if we wish to allow for side lobe tapering by use of a scaling on
> some of the elements in the phased array.
>
> Frank, Tom Clark, Rick Hambly, and I have been having regular
> meetings in Rick's lab. These experiments are proceeding and with
> some of these results, we will be calling together several people
> to try to get them to participate in our ambitious projects.
>
> Expect to hear more and see more in the journal as we continue this
> work and we pick up the pace in anticipation of the annual meeting.
>
>
> A new IHU for Phase 3 E and AMSAT Eagle
>
> Recently we have begun preparing the new integrated housekeeping
> unit for Phase 3E and AMSAT Eagle. Lyle Johnson and Chuck Green
> have done a great job in designing and getting it getting it ready
> for testing and ready to accept IPS, the standard spacecraft
> operating system originated by Karl Meinzer, DJ4ZC. Karl was
> heavily involved in the design of the watchdog system and the
> overall architecture. He has asked that we work on a software
> defined receiver utilizing a very powerful forward error correcting
> code and that it be run on the IHU-3. If this is successful and
> proves reliable on P3E, it will be the primary link to the
> ambitious P5A Mars mission Karl is leading.
>
> Yesterday the test code suite came up and ran on the IHU.
> Immediately after finalizing that and getting it to Stacey Mills,
> who will be doing radiation testing for us, we will begin putting
> IPS on it. Expect to see the development model running this code
> at the annual meeting and expect to see an article by several folks
> with Lyle and Chuck taking the lead on that.
>
> Thank you for reading and for your continued support of AMSAT.
>
> 73's
> Bob
> N4HY
> *
> ----
> Sent via amsat-bb@amsat.org. Opinions expressed are those of the
> author.
> Not an AMSAT member? Join now to support the amateur satellite
> program!
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
>
- -Freeman
"If you are going through hell, keep going."
-- Sir Winston Churchill
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
Read previous mail | Read next mail
| |