| |
CX2SA > SATDIG 24.07.05 04:24l 115 Lines 4036 Bytes #999 (0) @ WW
BID : 14353_CX2SA
Read: GUEST
Subj: AMSAT-BB-digest V2004 #802 5/7
Path: DB0FHN<DB0FOR<DB0SIF<DB0EA<DB0RES<DK0WUE<7M3TJZ<PY1AYH<CX2SA
Sent: 050724/0316Z @:CX2SA.LAV.URY.SA #:14353 [Minas] FBB7.00e $:14353_CX2SA
From: CX2SA@CX2SA.LAV.URY.SA
To : SATDIG@WW
Message: 17
Date: Sat, 23 Jul 2005 17:44:55 -0500
From: "Thomas Webb" <tmwebb@cox.net>
Subject: [amsat-bb] Win 2000 & ISA Slot
Anyone using Win 2000 with Nova and KCT? I've been told Win 2000 and ISA
slots do not play well together.
Objective: upgrade from Win98Se to Win 2000.
Tom Webb, WA9AFM/5
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
------------------------------
Message: 18
Date: Sun, 24 Jul 2005 11:50:40 -0700
From: Sil - ZL2CIA <caleriffic@paradise.net.nz>
Subject: Re: [amsat-bb] ISS Contact
Vincenzo,
I have successfully used the ISS crossband repeater in the past.
You will need to correctly adjust your TX frequency for correct for
doppler. This is essential because the ISS is a single channel
satellite. You need to start transmitting about 10 KHz low, at the
beginning of the pass, and end about 10 KHz high. It you do not have
computer control of your rig, you can print yourself a guide of the
changes you need to make during the pass.
Sil - ZL2CIA (ex PA3HIL)
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
------------------------------
Message: 19
Date: Sun, 24 Jul 2005 11:47:33 -0700
From: Sil - ZL2CIA <zl2cia@AMSAT.Org>
Subject: Re: [amsat-bb] ISS Contact
Vincenzo,
I have successfully used the ISS crossband repeater in the past.
You will need to correctly adjust your TX frequency for correct for
doppler. This is essential because the ISS is a single channel
satellite. You need to start transmitting about 10 KHz low, at the
beginning of the pass, and end about 10 KHz high. It you do not have
computer control of your rig, you can print yourself a guide of the
changes you need to make during the pass.
Sil - ZL2CIA (ex PA3HIL)
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
------------------------------
Message: 20
Date: Sat, 23 Jul 2005 18:43:58 -0700
From: Jim Walls <k6ccc@earthlink.net>
Subject: Re: [amsat-bb] Win 2000 & ISA Slot
Thomas Webb wrote:
> Anyone using Win 2000 with Nova and KCT? I've been told Win 2000 and ISA
> slots do not play well together.
>
> Objective: upgrade from Win98Se to Win 2000.
Tom,
I have used Win 2K Pro with ISA slots and KCT under Nova for Windows
just fine for years. For several years, my primary computer that was
used for satellite tracking ran Win2K Pro and Nova for Windows driving a
KCT. Worked just fine. That computer was replaced with this one which
does not have ISA slots (and it's also WinXP Pro) so that meant I could
not use the KCT with the new computer. I bought a Satellite Tracker Jr
from W0LMD which uses a serial port from the computer and that works
just fine with Nova for Windows. One of these days I intend to have a
second (or third) El/AZ array and will use a really old computer that
has ISA slots with the KCT. The only real issue with the KCT under
Win2K is that there were no DOS drivers for the KCT that would work
under Win2K. That means you can't use (for example) Station. I
actually have a very old computer here that has been loaded with Win98SE
primarily because I can run Station on it (it's WAY to slow for Nova)
with the KCT.
- --
73
- -------------------------------------
Jim Walls - K6CCC
k6ccc@amsat.org
Ofc: 818-548-4804
http://home.earthlink.net/~k6ccc
AMSAT Member 32537 - WSWSS Member 395
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
Read previous mail | Read next mail
| |