OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
CX2SA  > SATDIG   18.07.05 09:07l 172 Lines 6056 Bytes #999 (0) @ WW
BID : 12288_CX2SA
Read: GUEST
Subj: AMSAT-BB-digest V2004 #795 4/4
Path: DB0FHN<DB0THA<DB0ERF<DB0FBB<DB0IUZ<DB0GOS<DB0RES<DK0WUE<I0TVL<CX2SA
Sent: 050718/0752Z @:CX2SA.LAV.URY.SA #:12288 [Minas] FBB7.00e $:12288_CX2SA
From: CX2SA@CX2SA.LAV.URY.SA
To  : SATDIG@WW


Message: 13
Date: Sun, 17 Jul 2005 14:06:42 -0700 (PDT)
From: Jim Jerzycke <kq6ea@pacbell.net>
Subject: Re: [amsat-bb] WX Proofing Rotors

Hi, Rick
I have my 5400 separated, and use a round plastic
trashcan over the azimuth rotor, and a rectangular one
over the elevation rotor. I bought a sheet metal roof
'feed through' like you'd use for a vent stack, and
run the mast through it up to the thrust bearing. It's
screwed to the cut-down round trashcan, hose-clamped
to the mast, and the assembly rotates with the mast.
It keeps water from running down the mast and all over
the rotor. I trimmed them both to fit with a pair of
tin snips, and painted them so the UV out here
wouldn't degrade the plastic quite so fast. The rotors
aren't fully "weatherproofed", but it keeps direct
rain off them.
73, Jim  KQ6EA

- --- "Lawn, Richard" <RLawn@uarts.edu> wrote:

> Has anyone thought of some creative way to protect
> the yaesu rotors from bad wx? I would like to avoid
> rebuilding my 5400 again for as long as I can :)
> I'll bet someone has thought of some good idea to
> keep much of the weather off the rotors.
>
> Rick
> W2JAZ
> ----
> Sent via amsat-bb@amsat.org. Opinions expressed are
> those of the author.
> Not an AMSAT member? Join now to support the amateur
> satellite program!
> To unsubscribe, send "unsubscribe amsat-bb" to
> Majordomo@amsat.org
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

------------------------------

Message: 14
Date: Sun, 17 Jul 2005 15:58:25 -0500
From: "George Henry" <ka3hsw@earthlink.net>
Subject: Re: [amsat-bb] SAtPC32 Question

I don't believe that the SASI Tracker is supported under SatPC32, but the
FODTrack definitely is.  As far as CAT goes, I presume you have followed all
the tips in the "Hints for Yaesu Users" file found under the "?" menu, as
far as setting your port, radio info, CAT delay, etc.?  Then just enable CAT
by clicking on the "C-" box at the upper left to change it to "C+".  It
should work just fine.  My 910H worked FB first time, following Erich's
tips.

George, KA3HSW


- ----- Original Message -----
From: "Lawn, Richard" <RLawn@uarts.edu>
To: <amsat-bb@amsat.org>
Sent: Sunday, July 17, 2005 1:59 PM
Subject: [amsat-bb] SAtPC32 Question


> Now that I'm back on the birds with rotor control working again I'd like
> to consider giving up NOVA for something that will control rotor and radio
> for dopler shift. I hear a lot about SatPC32 and dowloaded the demo but
> can't seem to get it to talk to either my radio (FT-847) or rotor through
> the SASI interface. I have built a working FodTrack interface so if that
> is the problem on that end I can make the change, but can't get CAT
> communication working. What am I missing?
>
> Rick
> W2JAZ
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

------------------------------

Message: 15
Date: Sun, 17 Jul 2005 21:46:40 -0000
From: "Alan P. Biddle" <APBIDDLE@mailaps.org>
Subject: RE: [amsat-bb] SAtPC32 Question

Rick,

I am not familiar with rotor interface, but I do use the FT-847 with
SatPC32.

Some things to check are the cable, null modem, the serial port number, from
SATSETUP, and the model and baud rate from the Options menu from SATPC32.
These last two are in the upper right corner.  With these, you should be
able to get the rig in and out of SAT mode.

There are some help files for Yaesu rigs in the program directory which
might be of help.

Alan
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

------------------------------

Message: 16
Date: Sun, 17 Jul 2005 20:04:51 -0400
From: "Andrew Glasbrenner" <glasbrenner@mindspring.com>
Subject: Re:  [amsat-bb] photo request

Thanks to WA4SXM, W3IWI, G0MRF, KB2M and KI4HXT...I found exactly the shot I
needed.

73, Drew KO4MA


>I am looking for a photo from Dayton, specifically from the AO-51 V/S pass
>where W2GPS, W5DID, and others made contacts using my FT-470 and long
>rubber duck antenna for the uplink. If anyone has a picture of this, or
>someone using a whip antenna to uplink on a V/S pass, please send it to me
>ASAP for inclusion in a article. Of course I'll credit the photographer.
>
> Thanks a bunch!
>
> 73, Drew KO4MA ----
> Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT member? Join now to support the amateur satellite program!
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

------------------------------

Message: 17
Date: Sun, 17 Jul 2005 22:39:13 -0400
From: sco@sco-inc.com
Subject: [amsat-bb] W6IHG Tuner Error

I am getting a Unrecognized database error msg when I try to start
the program. Tried uninstalling the program and reinstalling but same
error. I can not get back to the part where i select where the
database is located.

Les
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

------------------------------

End of AMSAT-BB-digest V2004 #795
*********************************


----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the authors.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb-digest" to Majordomo@amsat.org


Read previous mail | Read next mail


 17.11.2026 18:44:41lGo back Go up