| |
CX2SA > SATDIG 15.07.05 08:28l 135 Lines 4769 Bytes #999 (0) @ WW
BID : 10940_CX2SA
Read: GUEST
Subj: AMSAT-BB-digest V2004 #791 3/5
Path: DB0FHN<DB0RGB<OK0PPL<DB0RES<DK0WUE<7M3TJZ<EA5AKC<CX2SA
Sent: 050715/0722Z @:CX2SA.LAV.URY.SA #:10940 [Minas] FBB7.00e $:10940_CX2SA
From: CX2SA@CX2SA.LAV.URY.SA
To : SATDIG@WW
Message: 8
Date: Wed, 13 Jul 2005 23:55:28 -0400
From: khwalsh@datrix.com (Kevin H. Walsh)
Subject: RE: [amsat-bb] IC910H
Hi,
The service manual for the ICOM 910-H is available in PDF format from
http://www.mods.dk/view.php?ListManuals=icom
if that helps any.
73
Kevin W8KHW
- -----Original Message-----
From: owner-AMSAT-BB@AMSAT.Org [mailto:owner-AMSAT-BB@AMSAT.Org] On Behalf
Of Jacques RAMBAUD
Sent: Wednesday, July 13, 2005 4:48 PM
To: Patrick Green; Charlie Schlieper
Cc: AMSAT-bb@AMSAT.Org
Subject: Re: [amsat-bb] IC910H
Yes Pat this exactly what I want to do , adding an other connector is
relatively simple , the modifications inside the radio are the issue , I
wonder if somebody made it and if yes how ??
73
Jacques F6BKI
- ----- Original Message -----
From: "Patrick Green" <pagreen@gmail.com>
To: "Charlie Schlieper" <n5td@vvm.com>
Cc: "Jacques RAMBAUD" <f6bki@wanadoo.fr>; <AMSAT-bb@amsat.org>
Sent: Wednesday, July 13, 2005 8:43 PM
Subject: Re: [amsat-bb] IC910H
He's talking about 2m EME and splitting the 2m TX from the 2m RX to another
connector. Is that possible? I don't have a 910H but I doubt it can do it.
73 de Pat --- KA9SCF.
Amsat #35741
On 7/13/05, Charlie Schlieper <n5td@vvm.com> wrote:
> Uhhhhh, the IC910H has a "common RF connector?"
> Are they making them different now with the current production runs?
>
> I have a fully loaded IC910H, and it has three seperate RF
> connectors-- one for 2m, 70cm, and 1.2GHz.
> What am I missing here?
>
> As a matter-of-fact, I used a low-loss TRI-PLEXER for a while to join
> the three seperate rf ports, to ONE common multi-band "magmount"
> antenna for portable use.
>
> Charlie, N5TD
>
> ----- Original Message -----
> From: "Jacques RAMBAUD" <f6bki@wanadoo.fr>
> To: <AMSAT-bb@amsat.org>
> Sent: Tuesday, July 12, 2005 3:01 PM
> Subject: [amsat-bb] IC910H
>
>
> > Hello,
> > I am planing to use the IC910H for 2m EME.
> > This radio has a common RF connector for transmit and receive.
> > As anyone found a way to modify the radio to have a separate receive
> > and transmit RF port?
> > 73
> > Jacques F6BKI
> > ----
> > Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> > Not an AMSAT member? Join now to support the amateur satellite program!
> > To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
> ----
> Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT member? Join now to support the amateur satellite program!
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
------------------------------
Message: 9
Date: Thu, 14 Jul 2005 14:59:40 -0400
From: "Joe Leikhim" <rhyolite@nettally.com>
Subject: Re: [amsat-bb] IC910H
JACQUES;
I am not sure why you need to do this, but you could place a coaxial relay
with its common port at the antenna connector of the radio and utilize the PTT
function from the radio to switch between the T and R ports. Of course you will
need to make sure that the radio can provide a PTT function which tracks the 2
M band exclusively and will sequence appropriately when transmitting to prevent
damage to your external equipment.
Otherwise, you will have to tear into the radio and isolate the RX port from
the internal antenna switch. This is probably a 50 OHM cable between the PA and
the receiver front end.
Joe
Message: 13
Date: Wed, 13 Jul 2005 20:34:08 -0000
From: "Jacques RAMBAUD" <f6bki@wanadoo.fr>
Subject: Re: [amsat-bb] IC910H
Hello again , based on the answers I received it seems that I have not
formulated my question correctly.
Yes there are 2 or 3 ( with the 1.2GHz option) RF connectors on the IC910 ,
I do not want to combine the 3 bands to a common cable .
For my 2 meters EME station I want to add an aditional RF connector on the
back panel of the 910 to serve as a separate RX input for 2 meters , The
original 2 meters RF connector will be the RF out for 2meters . To achieve
this goal some modifications have to be done inside the radio , I wanted to
know if some people have done it and how.
Thanks
Jacques F6BKI
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
Read previous mail | Read next mail
| |