| |
CX2SA > SATDIG 12.07.05 15:44l 131 Lines 4107 Bytes #999 (0) @ WW
BID : 9937_CX2SA
Read: GUEST
Subj: AMSAT-BB-digest V2004 #787 3/5
Path: DB0FHN<DB0FOR<DB0SIF<DB0EA<DB0RES<DK0WUE<7M3TJZ<PY1AYH<CX2SA
Sent: 050712/1428Z @:CX2SA.LAV.URY.SA #:9937 [Minas] FBB7.00e $:9937_CX2SA
From: CX2SA@CX2SA.LAV.URY.SA
To : SATDIG@WW
Message: 5
Date: Mon, 11 Jul 2005 14:49:14 +0100
From: David Johnson <g4dpz@mac.com>
Subject: [amsat-bb] PCSat2 Web Site Available Again
Hi,
The site is available again. I had a problem with several URLs this
morning
including www.google.co.uk !
- - Dave
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
------------------------------
Message: 6
Date: Mon, 11 Jul 2005 14:17:36 +0000
From: Nigel KC8NHF/G8IFF <nigel@ngunn.net>
Subject: Re: [amsat-bb] Shuttle launch
Works fine now.
jtowler wrote:
>Guys,
>
>So where did the site go?
>
>
>
- --
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
Nigel A. Gunn. 59 Beadlemead, Milton Keynes, MK6 4HF, England.
Tel +44 (0)1908 604004
e-mail nigel@ngunn.net or nigel@ngunn.demon.co.uk
www http://www.ngunn.net or http://www.ngunn.demon.co.uk
Amateur radio stations G8IFF, KC8NHF
Member of AMSAT-UK #182, ARRL, GQRP Club, QRPARCI, SOC #548 RAYNET
Flying Pig #385, Dayton ARA #2128, AMSAT-NA LM-1691,
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
------------------------------
Message: 7
Date: Mon, 11 Jul 2005 16:34:16 +0100
From: "Jules G0NZO" <g0nzo@amsat.org>
Subject: [amsat-bb] Tiny 2 Mk 2 Schematic request and 38k4 question
I was looking to use the Tiny 2 Mk2 for 38k4 baud.
It has been suggested that these units are not really useable above 19k2.
This is a little confusing as the TNC has jumpers for upto 38k4 baud on the
radio side.
Has anyone tried this TNC at the higher rates?
Also I am looking for a schematic. If anyone could drop me a copy, paper or
electronic, I would be very grateful. (All reasonable costs covered of
course).
Thanks
Jules
G0NZO
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
------------------------------
Message: 8
Date: Mon, 11 Jul 2005 17:35:49 +0100
From: "Howard Long" <howard@howardlong.com>
Subject: RE: [amsat-bb] Tiny 2 Mk 2 Schematic request and 38k4 question
Hi Jules
I haven't tried a Tiny 2 but I have got a TNC-NB96 that's another TNC-2
clone to work at 38k4. There's some details on my website about it
http://www.g6lvb.com/TNC%20NB96%20Mods.htm
I guess the big things to consider here are:
o Computer RS-232 interface speed needs to be 57k6 or greater;
o Does the TNC-2 clone have enough CPU;
o Does the TNC-2 clone have enough RAM;
o New modem filters for G3RUH FSK modem.
73 Howard G6LVB
- -----Original Message-----
From: owner-AMSAT-BB@amsat.org [mailto:owner-AMSAT-BB@amsat.org]On
Behalf Of Jules G0NZO
Sent: 11 July 2005 16:34
To: amsat-bb@amsat.org
Subject: [amsat-bb] Tiny 2 Mk 2 Schematic request and 38k4 question
I was looking to use the Tiny 2 Mk2 for 38k4 baud.
It has been suggested that these units are not really useable above 19k2.
This is a little confusing as the TNC has jumpers for upto 38k4 baud on the
radio side.
Has anyone tried this TNC at the higher rates?
Also I am looking for a schematic. If anyone could drop me a copy, paper or
electronic, I would be very grateful. (All reasonable costs covered of
course).
Thanks
Jules
G0NZO
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
Read previous mail | Read next mail
| |