OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
CX2SA  > SATDIG   07.07.05 15:06l 133 Lines 4576 Bytes #999 (0) @ WW
BID : 7704_CX2SA
Read: GUEST
Subj: AMSAT-BB-digest V2004 #782 5/8
Path: DB0FHN<DB0MRW<DB0FOR<DB0SIF<DB0EA<DB0RES<DK0WUE<7M3TJZ<HG8LXL<CX2SA
Sent: 050707/1330Z @:CX2SA.LAV.URY.SA #:7704 [Minas] FBB7.00e $:7704_CX2SA
From: CX2SA@CX2SA.LAV.URY.SA
To  : SATDIG@WW


Message: 11
Date: Wed, 6 Jul 2005 17:17:32 -0400 (EDT)
From: n4qwf@ntelos.net
Subject: [amsat-bb] Pocketsat and logger?????

Got the Zire 72 loaded and it is working great. Thanks to those that
offered advice on the software. AO-27 just passed and it was right on
time. The skid for the transponder on there website was not spot on but it
did come on and few guys were on there. I am really going to enjoy this
little fellow when out in the car.

Anybody using a logging program for satellite contacts on one of these?
That would be really nice. Boy if I could come home and hot sync to
Log-EQF I would be really be tickled. Thanks

Best regards << John
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

------------------------------

Message: 12
Date: Wed, 6 Jul 2005 15:35:52 -0700
From: Robert V Johnson <w7lrd@juno.com>
Subject: [amsat-bb] 'S' Band antenna/downconverter

Hello
I've got  two days left on my 'S' band antenna on ebay with no nibbles
yet.  It's a good deal I really don't want to put it back in the garage.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5786469616&ssPageName=
ADME:B:LC:US:1


73 Bob W7LRD
Seattle
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

------------------------------

Message: 13
Date: Wed, 6 Jul 2005 20:22:47 EDT
From: G0MRF@aol.com
Subject: [amsat-bb] 70 cms pre-amps

Hello Group.

There have been several mails recently either reporting poor receive  signals
on U band downlinks or asking about 70cms pre-amps.

I have been working on a general purpose PCB for a 70cm / 23cm pre-amp.
Although this is 'work in progress'  the results on 70cm have been quite  good.
If
anyone needs some encouragement to try building a pre-amp for  themselves
then there are some basic details at:

_http://www.g0mrf.freeserve.co.uk/432LNA.htm_
(http://www.g0mrf.freeserve.co.uk/432LNA.htm)

The ATF54143 seems very forgiving and good results can be obtained even  with
'dead bug' construction.  - As long as you don't have too much source
inductance and you use the resistor in the drain.

73

David  G0MRF
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

------------------------------

Message: 14
Date: Wed, 6 Jul 2005 20:49:56 -0700
From: "kevin schuchmann" <wa6fwf@pacbell.net>
Subject: Re: [amsat-bb] www.amsat.org/amsat-new/echo/ModeJ.php

Keith N6ORS said...

>>www.amsat.org/amsat-new/echo/ModeJ.php
>
> That page, in particular lacks accuracy. Don't ask where those numbers
> come from...
Snip!

Hey Keith,

They come from inexperience and no actual testing, since from around 1977
harmonic suppression on a vhf/uhf transmitter needs to be > or = to 60db,
1.2ghz needs to be > or = to 50db . so there is no way a properly working 2m
radio is putting out 1.56 watts on 432. Besides if you put 1.5 watts into
the front end of a gasfet preamp you can kiss it good bye...

quoting from the article..
"I used a small 50 ohm load of the type typically used to terminate the old
coaxial style local area networks, one I had lying around in my junk box. I
have no idea of the power handling capacity of the load, but since this was
receive only it seemed reasonable."

10-base-T  loads were usually a 1/4 watt or maybe a 1/2 watt, if
you really were putting 1.5watts into them they wouldn't last long
before they smoked,since the load doesn't smoke this should be a clue,and
the last statement makes no sense, receive only? how would that even apply?
isn't 1.5 watts 1.5 watts no matter what? If you really think you had 1.5
watts
flowing around you could easily put a watt meter in circuit and see it and
check your theory.

The idea is sound, and it has been proven to work but the math in the
article is painfully wrong.

There really should be some sort of peer review before things gets posted as
gospel on the Amsat website.

73
wa6fwf
Kevin
#19623
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org


Read previous mail | Read next mail


 17.11.2026 04:34:17lGo back Go up