OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
CX2SA  > SATDIG   02.07.05 15:31l 179 Lines 6560 Bytes #999 (0) @ WW
BID : 5238_CX2SA
Read: GUEST
Subj: AMSAT-BB-digest V2004 #774 5/7
Path: DB0FHN<DB0RGB<OK0PPL<DB0RES<DK0WUE<7M3TJZ<CX2ACB<CX2SA
Sent: 050702/0330Z @:CX2SA.LAV.URY.SA #:5238 [Minas] FBB7.00e $:5238_CX2SA
From: CX2SA@CX2SA.LAV.URY.SA
To  : SATDIG@WW


Message: 12
Date: Fri, 1 Jul 2005 14:43:16 -0500
From: "Charlie Schlieper" <n5td@vvm.com>
Subject: Re: [amsat-bb] Up and dwnlink polarization of HAMSAT

Thanks Drew.
Your comments are appreciated.

I thought I had read somewhere that a radio receiver senses a CP wave
as the opposite CP polarization from the transmitters view.

I am glad we have the expertise of others, sharing their experiences
through this medium, to keep us straight.

73,
Charlie, N5TD


- ----- Original Message -----
From: "Andrew Glasbrenner" <glasbrenner@mindspring.com>
To: "Charlie Schlieper" <n5td@vvm.com>; "Don,w7das" <w7das@cox.net>;
<amsat-bb@AMSAT.ORG>
Sent: Friday, July 01, 2005 2:05 PM
Subject: Re: [amsat-bb] Up and dwnlink polarization of HAMSAT


> No...RHCP matches RHCP. Think of it this way. Take two bolts, both with
> the same threads. Think of them like helixes. Put a nut on one bolt. Point
> them at each other like antennas would be. Move them close enough together
> that the ends touch. Notice how the nut (the wavefront) will thread off
> the first bolt right onto the second! If a LHCP transmit antenna required
> a RHCP receive antenna this would not be true.
>
> It's a simplistic analog, but always one that helped me understand
> circularity.
>
> The part about defining what constitutes RH or LH is true though. Groups
> disagree on which way the thumb points for which one, LOL. Been too long
> for me to remember who's on what side of that fence.
>
> 73, Drew KO4MA
>
> -----Original Message-----
> From: Charlie Schlieper <n5td@vvm.com>
> Sent: Jul 1, 2005 2:29 PM
> To: "Don, w7das" <w7das@cox.net>, amsat-bb@AMSAT.ORG
> Subject: Re: [amsat-bb] Up and dwnlink polarization of HAMSAT
>
> By golly, I think you're right Don.
>
> You just reminded me not only of that, but the fact that Optical theory
> denotes the polarization (polarisation) opposite from us radio guys, or
> as the twist is seen coming into the RECEIVE antenna, instead of the
> TRANSMIT antenna relationship.
>
> Thanks for that refresher!
>
> Charlie, N5TD
>
> ----- Original Message -----
> From: "Don, w7das" <w7das@cox.net>
> To: <amsat-bb@amsat.org>
> Sent: Friday, July 01, 2005 9:18 AM
> Subject: Re: [amsat-bb] Up and dwnlink polarization of HAMSAT
>
>
>>I may have read incorrectly, but I thought polarisation was determined by
>>the rotation of the electric field about the axis as the wave moved AWAY
>>from the source.  If this is true, wouldn't the polarisation be opposite
>>as
>>it arrived on Earth?  i.e. transmitting with an LHCP antenna in space
>>would
>>be best received with an RHCP antenna on Earth?
>>
>> 73,
>> Don
>>
>>
>> ----- Original Message -----
>> From: "William Leijenaar" <pe1rah@yahoo.com>
>> To: <amsat-bb@amsat.org>
>> Sent: Friday, July 01, 2005 2:37 AM
>> Subject: [amsat-bb] Up and dwnlink polarization of HAMSAT
>>
>>
>>> Hi AMSATs,
>>>
>>> This morning I received the answer from ISRO about my
>>> question for the uplink polarization, and why they
>>> used LHCP on the downlink.
>>>
>>> The uplink of HAMSAT is in RHCP, opposite of the 2m
>>> downlink that is in LHCP.
>>>
>>> I was also supprized to hear that the downlink is in
>>> LHCP, as most amateur sats use RHCP.
>>> The reason that ISRO used RHCP and LHCP is to avoid
>>> interaction between the uplink and downlink signals.
>>>
>>> By using opposite polarizations the output of the
>>> satellite would less interact on its 70cm input.
>>> Personaly I think the antennas are at such close range
>>> that this will not really help...
>>> At least we know the right polarizations, and the
>>> reason why it is done.
>>>
>>> Myself I have fixed RHCP antennas, and actually have
>>> had never any problems with the HAMSAT.
>>>
>>> On the other hand the signals are that strong that it
>>> should be no problem, and most of the hams I hear on
>>> HAMSAT are in aligator mode and can use some
>>> polarization attenuation on the uplink :o)
>>>
>>> 73
>>> William
>>> PE1RAH
>>> ---
>>> ----
>>> Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
>>> Not an AMSAT member? Join now to support the amateur satellite program!
>>> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
>> ----
>> Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
>> Not an AMSAT member? Join now to support the amateur satellite program!
>> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
> ----
> Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT member? Join now to support the amateur satellite program!
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

------------------------------

Message: 13
Date: Fri, 01 Jul 2005 12:52:28 -0700
From: "laura halliday" <marsgal42@hotmail.com>
Subject: RE: [amsat-bb] Pocketsat memory requirement

John n4qwf@ntelos.net wrote:

>I am awaiting the arrival of my new Palm Zire 72 PDA. I am looking forward
>to using it for satellite tracking. I have downloaded the PocketSat
>program and started to read the docs. I can't seem to find any info on the
>memory requirement for this program on this device. The PDA comes with 32
>meg and can be upgraded with a card. I will order one if need be and would
>like to get that coming this way if I need it. Can anyone that is using
>this device with this program offer a suggestion?

Perhaps because PocketSat has no special memory
requirements? Not every system requires a gigabyte
of RAM to run Hello, World. :-)

The documentation mentions that you need PalmOS 3.1
or later. Only a handful of 3.1 devices had less than
8 MB of RAM, and these devices (e.g. Handspring
Visor) would run PocketSat so slowly that they
wouldn't be much fun anyway with a compute-intensive
application like this.

FWIW: I run PocketSat (and a whole bunch of other
stuff) on a Palm Tungsten E (bought over the counter
at Radio Shack). It occupies less than 1 MB.

Laura Halliday VE7LDH     "Que les nuages soient notre
Grid: CN89mg                       pied a terre..."
ICBM: 49 16.05 N 122 56.92 W     - Hospital/Shafte
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org


Read previous mail | Read next mail


 16.11.2026 21:28:54lGo back Go up