| |
CX2SA > SATDIG 27.06.05 17:05l 157 Lines 6345 Bytes #999 (0) @ WW
BID : 3164_CX2SA
Read: GUEST
Subj: AMSAT-BB-digest V2004 #763 3/7
Path: DB0FHN<DB0MRW<OK0PPL<DB0RES<DK0WUE<I0TVL<CX2SA
Sent: 050627/1547Z @:CX2SA.LAV.URY.SA #:3164 [Minas] FBB7.00e $:3164_CX2SA
From: CX2SA@CX2SA.LAV.URY.SA
To : SATDIG@WW
Message: 6
Date: Sun, 26 Jun 2005 21:37:27 -0400
From: Ronald Nutter <rnutter@networkref.com>
Subject: Re: [amsat-bb] Field Day - The perils of handheld ops
Glad to hear that you had better luck than I did. Maybe next year, a
different uplink frequency can be used from the of the spares that AO-51
has. I think several were trying to use the bird and didnt know that
the downlink wasnt on UHF. I hear so many calls that only seem to show
up on field day. My favorite is the one where the station calls CQ CQ
CQ Field Day for around 3 minutes. Really wish the ARRL would drop the
sat bonus.
Just my thoughts,
Ron
KA4KYI
John Meeks wrote:
> Hi Group,
>
> Working AO-51 in v/s mode with a handheld station seemed like an iffy
> proposition to me but I thought I'd give it a try. Friday nite and
> Saturday morning got my hopes up as I made 10 great contacts with the
> setup. pix at http://www.themidwives.org/sband
>
> When the first FD pass came over, my hopes were dashed hearing the huge
> numbers of stations all trying to work the bird at once and not waiting
> for a QSO to finish before calling CQ. I didn't have much hope for my 4
> watt HT to break through the noise.
>
> On the evening pass my luck changed. The bird was jammed as before and I
> didn't hear myself in several attempts to make a contact. At 0227z with
> Echo only a few degrees over the trees and sinking fast, I heard W1AW
> calling QRZ... threw out my club's call and was blown away to hear my
> signal full quieting on the downlink. I was stunned to hear W1AW come
> back with my call and his class and section. I acknowledged his info and
> gave him my 2 alpha/Michigan. With no interruptions in the QSO he gave
> me a QSL and echo went below my horizon.
>
> I was pretty excited and hurried to log the contact. Wrote the call,
> wrote the time and then completely blanked on the class and section. At
> least I'd be able to get it form the mini mp3 recorder I had taking the
> input from the W32A's headphone jack.
>
> It was a long pass so I settled down to listen. About 2 minutes into the
> recording...SILENCE dead silence. The file was finished. One of the
> major high points in my short ham career, lost to brain freeze and
> technical difficulties. At least I know W8GQN is in the W1AW logbook.
>
> On the last pass of FD I almost had success with VE4KK with Aruni at the
> mike but we were thoroughly broken up by dozens of other stations
> blasting in over both of us. So zero FD satellite contacts.
>
> The Lesson? Have someone else with a headset logging for you. And yes 4
> watts will do it if you're awfully lucky.
>
> 73 de KC8ZFN
> John in EN75
> ----
> Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT member? Join now to support the amateur satellite program!
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
>
>
- --
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.8.1/28 - Release Date: 6/24/2005
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
------------------------------
Message: 7
Date: Mon, 27 Jun 2005 01:43:12 +0000
From: k_9qh_o@att.net
Subject: Re: [amsat-bb] Re: 2m to 70cm upconverter design, any interrest ??
Just purchased a JAN crystal for 98 Mhz.
Cost was $25.00 plus $5.00 shipping.
- -------------- Original message from "Ed Krome (K9EK)" <K9EK@compuserve.com>:
--------------
> Message text written by Andy Brian
> >
> Hi,
> I know about that converter which was published in QST, the author was
> KA9LNV.
> The main problem for many of homebrewer were the local oscillator or better
> the
> crystal 101.875MHz, the problem was to get them somewhere.
> Maybe any suggestion to take any similar crystal?
>
> best regards Andy<
> -------------------
>
> Hi, all:
> I bought the original crystals from JAN Crystals in Florida. They
> were rather pricey even at the time (~$22, as I recall). I just looked on
> their
> web site and it is a bit difficult to determine if they will even do single
> crystals
> any more. Down East used to carry them, but they aren't listed any more.
> I have long thought that there must be some way to use standard
> microprocessor crystals or oscillator modules in this sort of service.
> Unfortunately, 100 MHz is just not close enough to 101.875 to work with
> a standard 30MHz top end IF rig. And you just can't pull them that far.
> Good
> project for some RF guru.
> As note on alternate thinking, one of the HF radios I have used
> with transverters
> is a Kenwood TS-430S transceiver. Nice in that it has a transverter port.
> Plug
> something into that 5-pin DIN and it automaticallly disables the
> transmitter
> and supplies 5mW of Rf through the transverter port only. Now here's the
> cool thing... although the transmitter will not transmit out of band under
> normal
> usage, it will give you 5mW of RF out the transverter port on any
> frequency.
> Anywhere from 3 to 30 MHz. So, I crystaled transverters to be used on 70cm
> so that the top end of the satellite band (436) would be at 30 MHz, and I
> could
> still use the weak signal portion (432) by simply tuning the TS430S to
> transmit
> on 26 MHz. Worked fine. I wonder how many other microprocessor-based
> rigs will do the same? Now if I could only train the darn thing to transmit
> above 30 mHz, I could use 100 MHz microprocessor stuff! Too bad.
> Re: the 2-part 70cm article that Dom I8CVS (who actually built and
> used one!) and others have referred to... I can send a 3-part zipped .pdf
> of it,
> where each part is small enough that most email servers don't choke on it.
>
> 73,
> Ed K9EK 9ex-KA9LNV)
> EM69xd
> ----
> Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT member? Join now to support the amateur satellite program!
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
Read previous mail | Read next mail
| |