| |
CX2SA > SATDIG 26.06.05 07:12l 205 Lines 7663 Bytes #999 (0) @ WW
BID : 1079_CX2SA
Read: GUEST
Subj: AMSAT-BB-digest V2004 #760 1/7
Path: DB0FHN<DB0MRW<DB0RGB<DB0AAB<F6KFT<LX0PAC<ON0LGE<SR1BSZ<SP7MGD<7M3TJZ<
EA5AKC<CX2SA
Sent: 050626/0607Z @:CX2SA.LAV.URY.SA #:1079 [Minas] FBB7.00e $:1079_CX2SA
From: CX2SA@CX2SA.LAV.URY.SA
To : SATDIG@WW
AMSAT-BB-digest Saturday, June 25 2005 Volume 2004 : Number 760
In this issue:
1: [amsat-bb] RE: AlfaSpid Az/El users
2: [amsat-bb] RE: AlfaSpid Az/El users
3: [amsat-bb] Re: 2m to 70cm upconverter design, any interrest ??
4: [amsat-bb] Cosmos-1 false reading
5: Re: [amsat-bb] Re: 2m to 70cm upconverter design, any interrest ??
6: [amsat-bb] Test
7: RE: [amsat-bb] Re: 2m to 70cm upconverter design, any interrest ??
8: [amsat-bb] California Amplifier 130415 - first look - 70cm IF S band
downconverter
9: Re: [amsat-bb] AO-51 and vo-52 into ITUNE.CFG for InstantTrak
10: [amsat-bb] Successful contact via AO-51 mode V/S between 9W2QC and hams
of TAMSAT Group
11: Re: [amsat-bb] Re: 2m to 70cm upconverter design, any interrest ??
12: [amsat-bb] AO-27 and Field Day
13: [amsat-bb] Field Day 2005
14: Re: [amsat-bb] AO-27 and Field Day
15: Re: [amsat-bb] AO-27 and Field Day
16: Re: [amsat-bb] Re: 2m to 70cm upconverter design, any interrest ??
----------------------------------------------------------------------
Message: 1
Date: Fri, 24 Jun 2005 20:31:19 -0400
From: Tom Clark <w3iwi@toad.net>
Subject: [amsat-bb] RE: AlfaSpid Az/El users
Daniel -- you might want to take a look at the MIT Haystack
Observatory's Student Radio Telescope (SRT) pages at
http://web.haystack.mit.edu/SRT/index.html. The ALFA/SPID is one of two
options they recommend for the project. You might also find their users
forum (http://web.haystack.mit.edu/SRT/forums/) to be of some use in
finding others who can help.
To use the mount as a telescope, Alan Rogers has designed a new rotor
controller using a Basic Stamp BS2 and National LMD18200 "H-Bridge"
motor controllers (see
http://web.haystack.mit.edu/SRT/pics/schemgndctl.pdf).
In addition to the Alfa/Spid, a nice heavy duty az/el mount is also
available from CASSI (http://www.cassicorp.com/)
73, Tom
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
------------------------------
Message: 2
Date: Fri, 24 Jun 2005 20:31:19 -0400
From: Tom Clark <w3iwi@toad.net>
Subject: [amsat-bb] RE: AlfaSpid Az/El users
Daniel -- you might want to take a look at the MIT Haystack
Observatory's Student Radio Telescope (SRT) pages at
http://web.haystack.mit.edu/SRT/index.html. The ALFA/SPID is one of two
options they recommend for the project. You might also find their users
forum (http://web.haystack.mit.edu/SRT/forums/) to be of some use in
finding others who can help.
To use the mount as a telescope, Alan Rogers has designed a new rotor
controller using a Basic Stamp BS2 and National LMD18200 "H-Bridge"
motor controllers (see
http://web.haystack.mit.edu/SRT/pics/schemgndctl.pdf).
In addition to the Alfa/Spid, a nice heavy duty az/el mount is also
available from CASSI (http://www.cassicorp.com/)
73, Tom
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
------------------------------
Message: 3
Date: Sat, 25 Jun 2005 12:22:18 +0200
From: Andy Brian <briaandy@gmail.com>
Subject: [amsat-bb] Re: 2m to 70cm upconverter design, any interrest ??
Hi,
if you want to help with cheap and simple converter is the best choice to
publish this converter in plain format for homebrewers etc. circuit
diagrams and PCB at your homepages
because the electronical elements is inexpensive in Asia and some others
countries.
This is my opinion, I know this is your hard job and you want to help us,
but I think this converter won't bring you money for your job.
best regards Andy
> >>-----Original Message-----
> >>From: William Leijenaar <pe1rah@yahoo.com>
> >>Sent: Jun 23, 2005 3:08 PM
> >>To: amsat-bb@AMSAT.Org
> >>Subject: [amsat-bb] 2m to 70cm upconverter design, any interrest ??
> >>
> >>Hi AMSATs,
> >>
> >>To get on the 70cm HAMSAT uplink is not easy for many
> >>hams in the world. FM handies are available, but other
> >>modes than FM is very rare and to expensive for those
> >>hams.
> >>
> >>To get them on 70cm ssb the best way is to use an
> >>upconverter from their widely available HF. With use
> >>of an upconverter an 10m ssb signal will be converted
> >>into an 70cm ssb signal and can be used for HAMSATs
> >>uplink.
> >>With use of a 2m to HF down-converter the same HF can
> >>be used for receiving the HAMSATs ssb downlink.
> >>
> >>I have been looking around the web to find available
> >>converters. For 2m to 10m down-converters there are
> >>several options, with good prices. Unfortunatly for
> >>10m to 70cm up-converters there is very little
> >>available and with high prices.
> >>
> >>Because of this I have been working on a cheap and
> >>simpel to make design. After some weeks testing and
> >>experimenting I got something on the test bench.
> >>
> >>The prototype can be seen on my webpage:
> >>www.qsl.net/pe1rah/10m70cm.htm
> >>
> >>or via my main page:
> >>www.qsl.net/pe1rah
> >>
> >>The features of the design are:
> >>-------------------------------
> >>* Made on a PCB
> >>* In a metal box (74mm x 148mm x 30mm)
> >>* 407MHz local oscillator build in
> >>* 12Vdc power supply
> >>* 50mW output on 70cm (enough to drive M57716 10W
> >>power module)
> >>* 28MHz BNC input, 70cm BNC output
> >>* Unwanted suppression >40dB
> >>* No exotic components
> >>
> >>When there is enough interrest I will deliver kits and
> >>complete constructed converters.
> >>
> >>I can not deliver it for a price less than below:
> >>-------------------------------------------------
> >>Kits = 175 USD (+ shipping costs)
> >>Complete build = 250 USD (+ shipping costs)
> >>
> >>!!! Please note that this is a complete TX
> >>upconverter, included PCB, Crystal, metal box, BNC
> >>connectors etc etc
> >>!!! The only thing needed to be qrv on HAMSAT 70cm
> >>uplink is a final amplifier.
> >>!!! Best solution is a M57716 module that give 10W
> >>output at the 50mW input.
> >>
> >>Let me know if there is any interrest,
> >>
> >>73,
> >>William Leijenaar
> >>PE1RAH
> >>---
> >>
> >>
> >>
> >>__________________________________
> >>Discover Yahoo!
> >>Get on-the-go sports scores, stock quotes, news and more. Check it out!
> >>http://discover.yahoo.com/mobile.html
> >>----
> >>Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> >>Not an AMSAT member? Join now to support the amateur satellite program!
> >>To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
> >>----
> >>Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> >>Not an AMSAT member? Join now to support the amateur satellite program!
> >>To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
> > http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
> > ----
> > Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> > Not an AMSAT member? Join now to support the amateur satellite program!
> > To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
> ----
> Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT member? Join now to support the amateur satellite program!
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
Read previous mail | Read next mail
| |